drivers: spi: atmel: Only access available chip-select registers #25
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Turn the informative message about no vmmc/vqmmc regulator found in debug one. There is no need to indicate that something optional is missing. Moreover, it can bring confusion, people who doesn't know it is optional may consider these messages as warnings or errors. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
The eMMC supports double data rate with a 1.8 voltage. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
As the SDHCI controller needs the 1.8V line to be always enabled for some eMMC configurations, set the proper "regulator-always-on" property to the board DTS files. Note that the sdhci classical regulator definitions doesn't suit our controller for this 1.8V purpose. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Set the gclk's parent clock to audio clock. Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Add code to support the mono channel audio. Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Following changes that appeared in lk 4.0.0, the gadget udc driver for some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families) incorrectly deduced full-speed USB link speed even when the hardware had negotiated a high-speed link. The fix is to make sure that the UDPHS Interrupt Enable Register value does not mask the SPEED bit in the Interrupt Status Register. For a mass storage gadget this problem lead to failures when the host had a USB 3 port with the xhci_hcd driver. If the host was a USB 2 port using the ehci_hcd driver then the mass storage gadget worked (but probably at a lower speed than it should have). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: <stable@vger.kernel.org> linux4sam#4.0+ Fixes: 9870d89 ("usb: atmel_usba_udc: Mask status with enabled irqs") Signed-off-by: Felipe Balbi <balbi@ti.com>
Conflicts: drivers/pinctrl/pinctrl-at91-pio4.c
Add CONFIG_CAN_M_CAN=y to enable Bosch M_CAN devices driver. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Due to the CAN Message RAM can be shared by multi M_CAN instances, so the base address of the CAN Message RAM for CAN0 and CAN1 are shared at 0x00210000. The default base address of the CAN Message RAM for CAN0 and CAN1 are configured at 0x200000 in CAN Memories Address-based Register. To avoid conflict with SRAM map for pm, change them to 0x2100000 in the AT91Bootstrap. As said in SAMA5D2 datasheet, the CAN clock is recommended to use frequencies of 20, 40 or 80 MHz, and to select the UPLLCK(480 MHz) as source clock. So, the "assigned-clock-rates" property has three options: 20000000, 40000000, and 80000000. The "assigned-clock-parents" property should be referred to utmi fixedly. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
The sama5d2_defconfig is about to be removed, align the generic one with sama5d2 support Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
dma_addr_t may be defined as 32 or 64 bit depending on configuration,
so it cannot be printed using the normal format strings, as
gcc correctly warns:
drivers/dma/at_xdmac.c: In function 'at_xdmac_interleaved_queue_desc':
drivers/dma/at_xdmac.c:922:51: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]
This changes the format strings to use the special "%pad" format
string that prints a dma_addr_t, and changes the arguments so we
pass the address by reference as required.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Fix typo in a macro which was not used until now. It explains why there is no error at compilation time. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: e1f7c9e "dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver" Cc: stable@vger.kernel.org # 3.19 and later
When setting the channel configuration register, the perid field is not set to 0 since it is useless for mem2mem transfers. Unfortunately, a device has 0 as perid. It could cause spurious flags status because the controller could mix some events from the two channels. For that reason, use the highest perid value for mem2mem transfers since it doesn't match the perid of other devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
The code was not in agreement with the comments. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Add runtime PM support and use runtime_force_suspend|resume() for system PM. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
atmel-mci-regs.h is only included in atmel-mci.c so move its content in the driver and do some cleanup in these definitions to remove checkpatch errors. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Remove atmel-mci-regs.h file since it has been merged in atmel-mci.c. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
The atmci_convert_chksize() function is no more valid for controller version 0x600 due to the introduction of '2 data' chunk size. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
This reverts commit 9072c49.
This option can be handy for connecting an USB mouse of keyboard. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This SoC is now handled normally by the generic sama5_defconfig, no need to keep a special defconfig. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
…nux-4.1-at91 Conflicts: arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
This patch prevents the driver from crashing when more than 4 SPI slaves are configured with the cs-gpios DT option.
noglitch
requested changes
Sep 20, 2016
| @@ -264,6 +264,8 @@ | |||
|
|
|||
| #define AUTOSUSPEND_TIMEOUT 2000 | |||
|
|
|||
| #define SPI_NUM_CSR 4 | |||
There was a problem hiding this comment.
There is no limit to the number of cs-gpio we can use. So why use this limit?
|
|
||
| if (!atmel_spi_is_v2(as)) | ||
| spi_writel(as, CSR0 + 4 * spi->chip_select, csr); | ||
| spi_writel(as, CSR0 + 4 * spi_chip_select_capped, csr); | ||
|
|
There was a problem hiding this comment.
I do feel that there is a pending issue here. It may be related to the use of internal CS selection. But it's not related to cs-gpio... So we have to find another way to prevent this crash.
There was a problem hiding this comment.
Currently the driver effectively only uses one CSR at a time, therefore we could always use CSR0 instead of selecting the CSR register depending on spi->chip_select.
There was a problem hiding this comment.
According to the bug documented in the comment above "cs_activate", maybe it is better to always use CSR1?
noglitch
pushed a commit
that referenced
this pull request
Mar 23, 2017
[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
noglitch
pushed a commit
that referenced
this pull request
Mar 27, 2017
[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ldesroches
pushed a commit
that referenced
this pull request
Jan 16, 2018
commit af3ff80 upstream. Because the HMAC template didn't check that its underlying hash algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))" through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC being used without having been keyed, resulting in sha3_update() being called without sha3_init(), causing a stack buffer overflow. This is a very old bug, but it seems to have only started causing real problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3) because the innermost hash's state is ->import()ed from a zeroed buffer, and it just so happens that other hash algorithms are fine with that, but SHA-3 is not. However, there could be arch or hardware-dependent hash algorithms also affected; I couldn't test everything. Fix the bug by introducing a function crypto_shash_alg_has_setkey() which tests whether a shash algorithm is keyed. Then update the HMAC template to require that its underlying hash algorithm is unkeyed. Here is a reproducer: #include <linux/if_alg.h> #include <sys/socket.h> int main() { int algfd; struct sockaddr_alg addr = { .salg_type = "hash", .salg_name = "hmac(hmac(sha3-512-generic))", }; char key[4096] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (const struct sockaddr *)&addr, sizeof(addr)); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key)); } Here was the KASAN report from syzbot: BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline] BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044 CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x137/0x190 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 memcpy include/linux/string.h:341 [inline] sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 crypto_shash_update+0xcb/0x220 crypto/shash.c:109 shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 hmac_finup+0x182/0x330 crypto/hmac.c:152 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172 crypto_shash_digest+0xc4/0x120 crypto/shash.c:186 hmac_setkey+0x36a/0x690 crypto/hmac.c:66 crypto_shash_setkey+0xad/0x190 crypto/shash.c:64 shash_async_setkey+0x47/0x60 crypto/shash.c:207 crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200 hash_setkey+0x40/0x90 crypto/algif_hash.c:446 alg_setkey crypto/af_alg.c:221 [inline] alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cristibirsan
pushed a commit
that referenced
this pull request
Nov 8, 2018
[ Upstream commit d85536c ] Add missing prepare/unprepare operations for fbi->clk, this fixes following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0 Enabling unprepared disp0_clk Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25 Hardware name: Marvell MMP2 (Device Tree Support) [<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14) [<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0) [<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c) [<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0) [<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c) [<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac) [<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94) [<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470) [<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124) [<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0) [<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230) [<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0) [<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0) [<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0) [<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c) [<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xd008bfb0 to 0xd008bff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace c0af40f9e2ed7cb4 ]--- Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [b.zolnierkie: enhance patch description a bit] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
cristibirsan
pushed a commit
that referenced
this pull request
Oct 3, 2019
…s while handle_mm_fault [ Upstream commit 4d44745 ] do_page_fault() forgot to relinquish mmap_sem if a signal came while handling handle_mm_fault() - due to say a ctl+c or oom etc. This would later cause a deadlock by acquiring it twice. This came to light when running libc testsuite tst-tls3-malloc test but is likely also the cause for prior seen LTP failures. Using lockdep clearly showed what the issue was. | # while true; do ./tst-tls3-malloc ; done | Didn't expect signal from child: got `Segmentation fault' | ^C | ============================================ | WARNING: possible recursive locking detected | 4.17.0+ #25 Not tainted | -------------------------------------------- | tst-tls3-malloc/510 is trying to acquire lock: | 606c7728 (&mm->mmap_sem){++++}, at: __might_fault+0x28/0x5c | |but task is already holding lock: |606c7728 (&mm->mmap_sem){++++}, at: do_page_fault+0x9c/0x2a0 | | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(&mm->mmap_sem); | lock(&mm->mmap_sem); | | *** DEADLOCK *** | ------------------------------------------------------------ What the change does is not obvious (note to myself) prior code was | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_ERROR | up_read | if user_mode | return <-- lock still held, this was the BUG New code | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_RETRY | return <-- not same case as above, but still OK since | core mm already relinq lock for FAULT_RETRY | ... | | < Now falls through for bug case above > | | up_read() <-- lock relinquished Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
cristibirsan
pushed a commit
that referenced
this pull request
Oct 9, 2019
[ Upstream commit 46e4a26 ] syzbot reports an error on flush_request_modules() for the second device. This workqueue was never initialised so simply remove the offending line. usb 1-1: USB disconnect, device number 2 em28xx 1-1:1.153: Disconnecting em28xx #1 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 12 at kernel/workqueue.c:3031 __flush_work.cold+0x2c/0x36 kernel/workqueue.c:3031 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc2+ #25 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 panic+0x2a3/0x6da kernel/panic.c:219 __warn.cold+0x20/0x4a kernel/panic.c:576 report_bug+0x262/0x2a0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x12b/0x1e0 arch/x86/kernel/traps.c:272 do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:291 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1026 RIP: 0010:__flush_work.cold+0x2c/0x36 kernel/workqueue.c:3031 Code: 9a 22 00 48 c7 c7 20 e4 c5 85 e8 d9 3a 0d 00 0f 0b 45 31 e4 e9 98 86 ff ff e8 51 9a 22 00 48 c7 c7 20 e4 c5 85 e8 be 3a 0d 00 <0f> 0b 45 31 e4 e9 7d 86 ff ff e8 36 9a 22 00 48 c7 c7 20 e4 c5 85 RSP: 0018:ffff8881da20f720 EFLAGS: 00010286 RAX: 0000000000000024 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8128a0fd RDI: ffffed103b441ed6 RBP: ffff8881da20f888 R08: 0000000000000024 R09: fffffbfff11acd9a R10: fffffbfff11acd99 R11: ffffffff88d66ccf R12: 0000000000000000 R13: 0000000000000001 R14: ffff8881c6685df8 R15: ffff8881d2a85b78 flush_request_modules drivers/media/usb/em28xx/em28xx-cards.c:3325 [inline] em28xx_usb_disconnect.cold+0x280/0x2a6 drivers/media/usb/em28xx/em28xx-cards.c:4023 usb_unbind_interface+0x1bd/0x8a0 drivers/usb/core/driver.c:423 __device_release_driver drivers/base/dd.c:1120 [inline] device_release_driver_internal+0x404/0x4c0 drivers/base/dd.c:1151 bus_remove_device+0x2dc/0x4a0 drivers/base/bus.c:556 device_del+0x420/0xb10 drivers/base/core.c:2288 usb_disable_device+0x211/0x690 drivers/usb/core/message.c:1237 usb_disconnect+0x284/0x8d0 drivers/usb/core/hub.c:2199 hub_port_connect drivers/usb/core/hub.c:4949 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1454/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 process_scheduled_works kernel/workqueue.c:2331 [inline] worker_thread+0x7ab/0xe20 kernel/workqueue.c:2417 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: be7fd3c ("media: em28xx: Hauppauge DualHD second tuner functionality) Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Brad Love <brad@nextdimension.cc> Reported-by: syzbot+b7f57261c521087d89bb@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
|
It is now fixed in mainline with the following series: |
noglitch
pushed a commit
that referenced
this pull request
Sep 11, 2020
[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
noglitch
pushed a commit
that referenced
this pull request
Oct 2, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
noglitch
pushed a commit
that referenced
this pull request
Oct 7, 2020
commit c1d0da8 upstream. Patch series "mm: fix memory to node bad links in sysfs", v3. Sometimes, firmware may expose interleaved memory layout like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] In that case, we can see memory blocks assigned to multiple nodes in sysfs: $ ls -l /sys/devices/system/memory/memory21 total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 -rw-r--r-- 1 root root 65536 Aug 24 05:27 online -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index drwxr-xr-x 2 root root 0 Aug 24 05:27 power -r--r--r-- 1 root root 65536 Aug 24 05:27 removable -rw-r--r-- 1 root root 65536 Aug 24 05:27 state lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones The same applies in the node's directory with a memory21 link in both the node1 and node2's directory. This is wrong but doesn't prevent the system to run. However when later, one of these memory blocks is hot-unplugged and then hot-plugged, the system is detecting an inconsistency in the sysfs layout and a BUG_ON() is raised: kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This has been seen on PowerPC LPAR. The root cause of this issue is that when node's memory is registered, the range used can overlap another node's range, thus the memory block is registered to multiple nodes in sysfs. There are two issues here: (a) The sysfs memory and node's layouts are broken due to these multiple links (b) The link errors in link_mem_sections() should not lead to a system panic. To address (a) register_mem_sect_under_node should not rely on the system state to detect whether the link operation is triggered by a hot plug operation or not. This is addressed by the patches 1 and 2 of this series. Issue (b) will be addressed separately. This patch (of 2): The memmap_context enum is used to detect whether a memory operation is due to a hot-add operation or happening at boot time. Make it general to the hotplug operation and rename it as meminit_context. There is no functional change introduced by this patch Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
noglitch
pushed a commit
that referenced
this pull request
Oct 7, 2020
commit f85086f upstream. In register_mem_sect_under_node() the system_state's value is checked to detect whether the call is made during boot time or during an hot-plug operation. Unfortunately, that check against SYSTEM_BOOTING is wrong because regular memory is registered at SYSTEM_SCHEDULING state. In addition, memory hot-plug operation can be triggered at this system state by the ACPI [1]. So checking against the system state is not enough. The consequence is that on system with interleaved node's ranges like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] This can be seen on PowerPC LPAR after multiple memory hot-plug and hot-unplug operations are done. At the next reboot the node's memory ranges can be interleaved and since the call to link_mem_sections() is made in topology_init() while the system is in the SYSTEM_SCHEDULING state, the node's id is not checked, and the sections registered to multiple nodes: $ ls -l /sys/devices/system/memory/memory21/node* total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 In that case, the system is able to boot but if later one of theses memory blocks is hot-unplugged and then hot-plugged, the sysfs inconsistency is detected and this is triggering a BUG_ON(): kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This patch addresses the root cause by not relying on the system_state value to detect whether the call is due to a hot-plug operation. An extra parameter is added to link_mem_sections() detailing whether the operation is due to a hot-plug operation. [1] According to Oscar Salvador, using this qemu command line, ACPI memory hotplug operations are raised at SYSTEM_SCHEDULING state: $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \ -m size=$MEM,slots=255,maxmem=4294967296k \ -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \ -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \ -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \ -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \ -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \ -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \ -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \ -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \ Fixes: 4fbce63 ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
noglitch
pushed a commit
that referenced
this pull request
Feb 19, 2021
commit 27af8e2 upstream. We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9 ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
noglitch
pushed a commit
that referenced
this pull request
Feb 25, 2021
commit 27af8e2 upstream. We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9 ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
I will close this as the patch was accepted in upstream long time ago. |
noglitch
pushed a commit
that referenced
this pull request
Nov 18, 2021
[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211021114132.8196-2-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
noglitch
pushed a commit
that referenced
this pull request
Mar 14, 2022
[ Upstream commit b132030 ] A out-of-bounds bug can be triggered by an interrupt, the reason for this bug is the lack of checking of register values. In flexcop_pci_isr, the driver reads value from a register and uses it as a dma address. Finally, this address will be passed to the count parameter of find_next_packet. If this value is larger than the size of dma, the index of buffer will be out-of-bounds. Fix this by adding a check after reading the value of the register. The following KASAN report reveals it: BUG: KASAN: slab-out-of-bounds in find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline] BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline] BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603 Read of size 1 at addr ffff8880608c00a0 by task swapper/2/0 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 print_address_description+0x78/0x290 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x25b/0x380 mm/kasan/report.c:412 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:430 find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline] _dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline] dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603 flexcop_pass_dmx_data+0x2e/0x40 drivers/media/common/b2c2/flexcop.c:167 flexcop_pci_isr+0x3d1/0x5d0 drivers/media/pci/b2c2/flexcop-pci.c:212 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 62 2f 8c 48 89 e5 e8 fb 31 e8 f8 8b 05 75 4f 8e 03 85 c0 7e 07 0f 00 2d 8a 61 66 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde44c8 RCX: ffffffff88a11285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2f6200 RBP: ffff88806b71fcc8 R08: fffffbfff185ec40 R09: fffffbfff185ec40 R10: 0000000000000001 R11: fffffbfff185ec40 R12: 0000000000000002 R13: ffffffff8be9d6e0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Allocated by task 1: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x11/0x20 mm/kasan/kasan.c:490 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2741 [inline] slab_alloc mm/slub.c:2749 [inline] kmem_cache_alloc+0xeb/0x280 mm/slub.c:2754 kmem_cache_zalloc include/linux/slab.h:699 [inline] __kernfs_new_node+0xe2/0x6f0 fs/kernfs/dir.c:633 kernfs_new_node+0x9a/0x120 fs/kernfs/dir.c:693 __kernfs_create_file+0x5f/0x340 fs/kernfs/file.c:992 sysfs_add_file_mode_ns+0x22a/0x4e0 fs/sysfs/file.c:306 create_files fs/sysfs/group.c:63 [inline] internal_create_group+0x34e/0xc30 fs/sysfs/group.c:147 sysfs_create_group fs/sysfs/group.c:173 [inline] sysfs_create_groups+0x9c/0x140 fs/sysfs/group.c:200 driver_add_groups+0x3e/0x50 drivers/base/driver.c:129 bus_add_driver+0x3a5/0x790 drivers/base/bus.c:684 driver_register+0x1cd/0x410 drivers/base/driver.c:170 __pci_register_driver+0x197/0x200 drivers/pci/pci-driver.c:1411 cx88_audio_pci_driver_init+0x23/0x25 drivers/media/pci/cx88/cx88-alsa.c: 1017 do_one_initcall+0xe0/0x610 init/main.c:884 do_initcall_level init/main.c:952 [inline] do_initcalls init/main.c:960 [inline] do_basic_setup init/main.c:978 [inline] kernel_init_freeable+0x4d0/0x592 init/main.c:1145 kernel_init+0x18/0x190 init/main.c:1062 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff8880608c0000 which belongs to the cache kernfs_node_cache of size 160 The buggy address is located 0 bytes to the right of 160-byte region [ffff8880608c0000, ffff8880608c00a0) The buggy address belongs to the page: page:ffffea0001823000 count:1 mapcount:0 mapping:ffff88806bed1e00 index:0x0 compound_mapcount: 0 flags: 0x100000000008100(slab|head) raw: 0100000000008100 dead000000000100 dead000000000200 ffff88806bed1e00 raw: 0000000000000000 0000000000240024 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00 ^ ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Link: https://lore.kernel.org/linux-media/1620723603-30912-1-git-send-email-zheyuma97@gmail.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
noglitch
pushed a commit
that referenced
this pull request
Mar 18, 2022
[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
cristibirsan
pushed a commit
that referenced
this pull request
Dec 19, 2022
commit 1e41e69 upstream. UBSAN complains about array-index-out-of-bounds: [ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41 [ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]' [ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu [ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010 [ 1.980718] kernel: Call Trace: [ 1.980721] kernel: <TASK> [ 1.980723] kernel: show_stack+0x52/0x58 [ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f [ 1.980734] kernel: dump_stack+0x10/0x12 [ 1.980736] kernel: ubsan_epilogue+0x9/0x45 [ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci] [ 1.980748] kernel: ata_qc_issue+0x135/0x240 [ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580 [ 1.980754] kernel: ? vprintk_default+0x1d/0x20 [ 1.980759] kernel: ata_exec_internal+0x67/0xa0 [ 1.980762] kernel: sata_pmp_read+0x8d/0xc0 [ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90 [ 1.980768] kernel: sata_pmp_attach+0x8b/0x310 [ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0 [ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30 [ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci] [ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci] [ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci] [ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0 [ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560 [ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40 [ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci] [ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600 [ 1.980810] kernel: ata_scsi_error+0x9c/0xd0 [ 1.980813] kernel: scsi_error_handler+0xa1/0x180 [ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0 [ 1.980820] kernel: kthread+0x12a/0x150 [ 1.980823] kernel: ? set_kthread_struct+0x50/0x50 [ 1.980826] kernel: ret_from_fork+0x22/0x30 [ 1.980831] kernel: </TASK> This happens because sata_pmp_init_links() initialize link->pmp up to SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array. I can't find the maximum Enclosure Management ports specified in AHCI spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier Information" can utilize 4 bits, which implies it can support up to 16 ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the issue. BugLink: https://bugs.launchpad.net/bugs/1970074 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cristibirsan
pushed a commit
that referenced
this pull request
Dec 23, 2022
[ Upstream commit 153695d ] `hostname` needs to be set as null-pointer after free in `cifs_put_tcp_session` function, or when `cifsd` thread attempts to resolve hostname and reconnect the host, the thread would deref the invalid pointer. Here is one of practical backtrace examples as reference: Task 477 --------------------------- do_mount path_mount do_new_mount vfs_get_tree smb3_get_tree smb3_get_tree_common cifs_smb3_do_mount cifs_mount mount_put_conns cifs_put_tcp_session --> kfree(server->hostname) cifsd --------------------------- kthread cifs_demultiplex_thread cifs_reconnect reconn_set_ipaddr_from_hostname --> if (!server->hostname) --> if (server->hostname[0] == '\0') // !! UAF fault here CIFS: VFS: cifs_mount failed w/return code = -112 mount error(112): Host is down BUG: KASAN: use-after-free in reconn_set_ipaddr_from_hostname+0x2ba/0x310 Read of size 1 at addr ffff888108f35380 by task cifsd/480 CPU: 2 PID: 480 Comm: cifsd Not tainted 6.1.0-rc2-00106-gf705792f89dd-dirty #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0x85 print_report+0x16c/0x4a3 kasan_report+0x95/0x190 reconn_set_ipaddr_from_hostname+0x2ba/0x310 __cifs_reconnect.part.0+0x241/0x800 cifs_reconnect+0x65f/0xb60 cifs_demultiplex_thread+0x1570/0x2570 kthread+0x2c5/0x380 ret_from_fork+0x22/0x30 </TASK> Allocated by task 477: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7e/0x90 __kmalloc_node_track_caller+0x52/0x1b0 kstrdup+0x3b/0x70 cifs_get_tcp_session+0xbc/0x19b0 mount_get_conns+0xa9/0x10c0 cifs_mount+0xdf/0x1970 cifs_smb3_do_mount+0x295/0x1660 smb3_get_tree+0x352/0x5e0 vfs_get_tree+0x8e/0x2e0 path_mount+0xf8c/0x1990 do_mount+0xee/0x110 __x64_sys_mount+0x14b/0x1f0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 477: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x10a/0x190 __kmem_cache_free+0xca/0x3f0 cifs_put_tcp_session+0x30c/0x450 cifs_mount+0xf95/0x1970 cifs_smb3_do_mount+0x295/0x1660 smb3_get_tree+0x352/0x5e0 vfs_get_tree+0x8e/0x2e0 path_mount+0xf8c/0x1990 do_mount+0xee/0x110 __x64_sys_mount+0x14b/0x1f0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff888108f35380 which belongs to the cache kmalloc-16 of size 16 The buggy address is located 0 bytes inside of 16-byte region [ffff888108f35380, ffff888108f35390) The buggy address belongs to the physical page: page:00000000333f8e58 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888108f350e0 pfn:0x108f35 flags: 0x200000000000200(slab|node=0|zone=2) raw: 0200000000000200 0000000000000000 dead000000000122 ffff8881000423c0 raw: ffff888108f350e0 000000008080007a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888108f35280: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc ffff888108f35300: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc >ffff888108f35380: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc ^ ffff888108f35400: fa fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888108f35480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 7be3248 ("cifs: To match file servers, make sure the server hostname matches") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
cristibirsan
pushed a commit
that referenced
this pull request
Jan 19, 2023
[ Upstream commit 7d984da ] rxe_mr_cleanup() which tries to free mr->map again will be called when rxe_mr_init_user() fails: CPU: 0 PID: 4917 Comm: rdma_flush_serv Kdump: loaded Not tainted 6.1.0-rc1-roce-flush+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x5d panic+0x19e/0x349 end_report.part.0+0x54/0x7c kasan_report.cold+0xa/0xf rxe_mr_cleanup+0x9d/0xf0 [rdma_rxe] __rxe_cleanup+0x10a/0x1e0 [rdma_rxe] rxe_reg_user_mr+0xb7/0xd0 [rdma_rxe] ib_uverbs_reg_mr+0x26a/0x480 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x1a2/0x250 [ib_uverbs] ib_uverbs_cmd_verbs+0x1397/0x15a0 [ib_uverbs] This issue was firstly exposed since commit b18c7da ("RDMA/rxe: Fix memory leak in error path code") and then we fixed it in commit 8ff5f5d ("RDMA/rxe: Prevent double freeing rxe_map_set()") but this fix was reverted together at last by commit 1e75550 (Revert "RDMA/rxe: Create duplicate mapping tables for FMRs") Simply let rxe_mr_cleanup() always handle freeing the mr->map once it is successfully allocated. Fixes: 1e75550 ("Revert "RDMA/rxe: Create duplicate mapping tables for FMRs"") Link: https://lore.kernel.org/r/1667099073-2-1-git-send-email-lizhijian@fujitsu.com Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
cristibirsan
pushed a commit
that referenced
this pull request
Sep 25, 2023
commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This patch prevents the driver from crashing when more than 4
SPI slaves are configured with the cs-gpios DT option.
Without this patch, if a 5th SPI slave is configured, "spi_writel(as, CSR0 + 4 * spi_chip_select_capped, asd->csr);" will unintendedly overwrite a register that is not a CSR register and the driver crashes.