Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Add SAMA5D3x register definitions #31

Closed
wants to merge 1 commit into from
Closed

Add SAMA5D3x register definitions #31

wants to merge 1 commit into from

Conversation

Dambe
Copy link

@Dambe Dambe commented Jan 26, 2017

Adding or modifying register definitions so it matches the datasheet of the
SAMA5D3x. Previous definitions which are used in the corresponding macb.c file
are kept and marked with a comment (e.g. 'reserved') if they are not used
or used differently in the SAMA5D3x registers.

Add SAMA5D3x register definitions
25a48dc 
Adding or modifying register definitions so it matches the datasheet of the
SAMA5D3x. Previous definitions which are used in the corresponding macb.c file
are kept and marked with a comment (e.g. 'reserved') if they are not used
or used differently in the SAMA5D3x registers.
@Dambe Dambe closed this Jan 26, 2017
ldesroches pushed a commit that referenced this pull request Jan 16, 2018
@gregkh
kaiser: Set _PAGE_NX only if supported
92fd81f 
This resolves a crash if loaded under qemu + haxm under windows.
See https://www.spinics.net/lists/kernel/msg2689835.html for details.
Here is a boot log (the log is from chromeos-4.4, but Tao Wu says that
the same log is also seen with vanilla v4.4.110-rc1).

[    0.712750] Freeing unused kernel memory: 552K
[    0.721821] init: Corrupted page table at address 57b029b332e0
[    0.722761] PGD 80000000bb238067 PUD bc36a067 PMD bc369067 PTE 45d2067
[    0.722761] Bad pagetable: 000b [#1] PREEMPT SMP 
[    0.722761] Modules linked in:
[    0.722761] CPU: 1 PID: 1 Comm: init Not tainted 4.4.96 #31
[    0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014
[    0.722761] task: ffff8800bc290000 ti: ffff8800bc28c000 task.ti: ffff8800bc28c000
[    0.722761] RIP: 0010:[<ffffffff83f4129e>]  [<ffffffff83f4129e>] __clear_user+0x42/0x67
[    0.722761] RSP: 0000:ffff8800bc28fcf8  EFLAGS: 00010202
[    0.722761] RAX: 0000000000000000 RBX: 00000000000001a4 RCX: 00000000000001a4
[    0.722761] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000057b029b332e0
[    0.722761] RBP: ffff8800bc28fd08 R08: ffff8800bc290000 R09: ffff8800bb2f4000
[    0.722761] R10: ffff8800bc290000 R11: ffff8800bb2f4000 R12: 000057b029b332e0
[    0.722761] R13: 0000000000000000 R14: 000057b029b33340 R15: ffff8800bb1e2a00
[    0.722761] FS:  0000000000000000(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000
[    0.722761] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    0.722761] CR2: 000057b029b332e0 CR3: 00000000bb2f8000 CR4: 00000000000006e0
[    0.722761] Stack:
[    0.722761]  000057b029b332e0 ffff8800bb95fa80 ffff8800bc28fd18 ffffffff83f4120c
[    0.722761]  ffff8800bc28fe18 ffffffff83e9e7a1 ffff8800bc28fd68 0000000000000000
[    0.722761]  ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 ffff8800bc290000
[    0.722761] Call Trace:
[    0.722761]  [<ffffffff83f4120c>] clear_user+0x2e/0x30
[    0.722761]  [<ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7
[    0.722761]  [<ffffffff83de2088>] search_binary_handler+0x86/0x19c
[    0.722761]  [<ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98
[    0.722761]  [<ffffffff844febe0>] ? rest_init+0x87/0x87
[    0.722761]  [<ffffffff83de40be>] do_execve+0x23/0x25
[    0.722761]  [<ffffffff83c002e3>] run_init_process+0x2b/0x2d
[    0.722761]  [<ffffffff844fec4d>] kernel_init+0x6d/0xda
[    0.722761]  [<ffffffff84505b2f>] ret_from_fork+0x3f/0x70
[    0.722761]  [<ffffffff844febe0>] ? rest_init+0x87/0x87
[    0.722761] Code: 86 84 be 12 00 00 00 e8 87 0d e8 ff 66 66 90 48 89 d8 48 c1
eb 03 4c 89 e7 83 e0 07 48 89 d9 be 08 00 00 00 31 d2 48 85 c9 74 0a <48> 89 17
48 01 f7 ff c9 75 f6 48 89 c1 85 c9 74 09 88 17 48 ff 
[    0.722761] RIP  [<ffffffff83f4129e>] __clear_user+0x42/0x67
[    0.722761]  RSP <ffff8800bc28fcf8>
[    0.722761] ---[ end trace def703879b4ff090 ]---
[    0.722761] BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/v4.4/kernel/locking/rwsem.c:21
[    0.722761] in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: init
[    0.722761] CPU: 1 PID: 1 Comm: init Tainted: G      D         4.4.96 #31
[    0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014
[    0.722761]  0000000000000086 dcb5d76098c89836 ffff8800bc28fa30 ffffffff83f34004
[    0.722761]  ffffffff84839dc2 0000000000000015 ffff8800bc28fa40 ffffffff83d57dc9
[    0.722761]  ffff8800bc28fa68 ffffffff83d57e6a ffffffff84a53640 0000000000000000
[    0.722761] Call Trace:
[    0.722761]  [<ffffffff83f34004>] dump_stack+0x4d/0x63
[    0.722761]  [<ffffffff83d57dc9>] ___might_sleep+0x13a/0x13c
[    0.722761]  [<ffffffff83d57e6a>] __might_sleep+0x9f/0xa6
[    0.722761]  [<ffffffff84502788>] down_read+0x20/0x31
[    0.722761]  [<ffffffff83cc5d9b>] __blocking_notifier_call_chain+0x35/0x63
[    0.722761]  [<ffffffff83cc5ddd>] blocking_notifier_call_chain+0x14/0x16
[    0.800374] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    0.722761]  [<ffffffff83cefe97>] profile_task_exit+0x1a/0x1c
[    0.802309]  [<ffffffff83cac84e>] do_exit+0x39/0xe7f
[    0.802309]  [<ffffffff83ce5938>] ? vprintk_default+0x1d/0x1f
[    0.802309]  [<ffffffff83d7bb95>] ? printk+0x57/0x73
[    0.802309]  [<ffffffff83c46e25>] oops_end+0x80/0x85
[    0.802309]  [<ffffffff83c7b747>] pgtable_bad+0x8a/0x95
[    0.802309]  [<ffffffff83ca7f4a>] __do_page_fault+0x8c/0x352
[    0.802309]  [<ffffffff83eefba5>] ? file_has_perm+0xc4/0xe5
[    0.802309]  [<ffffffff83ca821c>] do_page_fault+0xc/0xe
[    0.802309]  [<ffffffff84507682>] page_fault+0x22/0x30
[    0.802309]  [<ffffffff83f4129e>] ? __clear_user+0x42/0x67
[    0.802309]  [<ffffffff83f4127f>] ? __clear_user+0x23/0x67
[    0.802309]  [<ffffffff83f4120c>] clear_user+0x2e/0x30
[    0.802309]  [<ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7
[    0.802309]  [<ffffffff83de2088>] search_binary_handler+0x86/0x19c
[    0.802309]  [<ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98
[    0.802309]  [<ffffffff844febe0>] ? rest_init+0x87/0x87
[    0.802309]  [<ffffffff83de40be>] do_execve+0x23/0x25
[    0.802309]  [<ffffffff83c002e3>] run_init_process+0x2b/0x2d
[    0.802309]  [<ffffffff844fec4d>] kernel_init+0x6d/0xda
[    0.802309]  [<ffffffff84505b2f>] ret_from_fork+0x3f/0x70
[    0.802309]  [<ffffffff844febe0>] ? rest_init+0x87/0x87
[    0.830559] Kernel panic - not syncing: Attempted to kill init!  exitcode=0x00000009
[    0.830559] 
[    0.831305] Kernel Offset: 0x2c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[    0.831305] ---[ end Kernel panic - not syncing: Attempted to kill init!  exitcode=0x00000009

The crash part of this problem may be solved with the following patch
(thanks to Hugh for the hint). There is still another problem, though -
with this patch applied, the qemu session aborts with "VCPU Shutdown
request", whatever that means.

Cc: lepton <ytht.net@gmail.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cristibirsan pushed a commit that referenced this pull request May 14, 2020
@jmberg-intel @gregkh
iwlwifi: mvm: limit maximum queue appropriately
c93fb50 
commit e5b72e3 upstream.

Due to some hardware issues, queue 31 isn't usable on devices that have
32 queues (7000, 8000, 9000 families), which is correctly reflected in
the configuration and TX queue initialization.

However, the firmware API and queue allocation code assumes that there
are 32 queues, and if something actually attempts to use #31 this leads
to a NULL-pointer dereference since it's not allocated.

Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also
add some code to catch this earlier in the future, if the configuration
changes perhaps.

Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
noglitch pushed a commit that referenced this pull request Oct 2, 2020
@howardchungg @gregkh
Bluetooth: L2CAP: handle l2cap config request during open state
b432ea8 
[ Upstream commit 96298f6 ]

According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.

The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.

=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12                #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16                #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12                #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5      #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5      #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16                #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18                #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5      #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14                #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20                #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14                #32
      L2CAP: Command Reject (0x01) ident 3 len 6
        Reason: Invalid CID in request (0x0002)
        Destination CID: 64
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5      #33
        Num handles: 1
        Handle: 256
        Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12               #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16               #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16               #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5     #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14               #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20               #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #32
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #33
      L2CAP: Configure Request (0x04) ident 3 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #34
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #35
        Num handles: 1
        Handle: 256
        Count: 1
...

Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
NicholasWalton pushed a commit to Cryocon/linux-at91 that referenced this pull request Jan 31, 2021
@gregkh
workqueue: fix rebind bound workers warning
911cf4b 
commit f7c17d2 upstream.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 16 at kernel/workqueue.c:4559 rebind_workers+0x1c0/0x1d0
Modules linked in:
CPU: 0 PID: 16 Comm: cpuhp/0 Not tainted 4.6.0-rc4+ linux4sam#31
Hardware name: IBM IBM System x3550 M4 Server -[7914IUW]-/00Y8603, BIOS -[D7E128FUS-1.40]- 07/23/2013
 0000000000000000 ffff881037babb58 ffffffff8139d885 0000000000000010
 0000000000000000 0000000000000000 0000000000000000 ffff881037babba8
 ffffffff8108505d ffff881037ba0000 000011cf3e7d6e60 0000000000000046
Call Trace:
 dump_stack+0x89/0xd4
 __warn+0xfd/0x120
 warn_slowpath_null+0x1d/0x20
 rebind_workers+0x1c0/0x1d0
 workqueue_cpu_up_callback+0xf5/0x1d0
 notifier_call_chain+0x64/0x90
 ? trace_hardirqs_on_caller+0xf2/0x220
 ? notify_prepare+0x80/0x80
 __raw_notifier_call_chain+0xe/0x10
 __cpu_notify+0x35/0x50
 notify_down_prepare+0x5e/0x80
 ? notify_prepare+0x80/0x80
 cpuhp_invoke_callback+0x73/0x330
 ? __schedule+0x33e/0x8a0
 cpuhp_down_callbacks+0x51/0xc0
 cpuhp_thread_fun+0xc1/0xf0
 smpboot_thread_fn+0x159/0x2a0
 ? smpboot_create_threads+0x80/0x80
 kthread+0xef/0x110
 ? wait_for_completion+0xf0/0x120
 ? schedule_tail+0x35/0xf0
 ret_from_fork+0x22/0x50
 ? __init_kthread_worker+0x70/0x70
---[ end trace eb12ae47d2382d8f ]---
notify_down_prepare: attempt to take down CPU 0 failed

This bug can be reproduced by below config w/ nohz_full= all cpus:

CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_NO_HZ_FULL=y

As Thomas pointed out:

| If a down prepare callback fails, then DOWN_FAILED is invoked for all
| callbacks which have successfully executed DOWN_PREPARE.
|
| But, workqueue has actually two notifiers. One which handles
| UP/DOWN_FAILED/ONLINE and one which handles DOWN_PREPARE.
|
| Now look at the priorities of those callbacks:
|
| CPU_PRI_WORKQUEUE_UP        = 5
| CPU_PRI_WORKQUEUE_DOWN      = -5
|
| So the call order on DOWN_PREPARE is:
|
| CB 1
| CB ...
| CB workqueue_up() -> Ignores DOWN_PREPARE
| CB ...
| CB X ---> Fails
|
| So we call up to CB X with DOWN_FAILED
|
| CB 1
| CB ...
| CB workqueue_up() -> Handles DOWN_FAILED
| CB ...
| CB X-1
|
| So the problem is that the workqueue stuff handles DOWN_FAILED in the up
| callback, while it should do it in the down callback. Which is not a good idea
| either because it wants to be called early on rollback...
|
| Brilliant stuff, isn't it? The hotplug rework will solve this problem because
| the callbacks become symetric, but for the existing mess, we need some
| workaround in the workqueue code.

The boot CPU handles housekeeping duty(unbound timers, workqueues,
timekeeping, ...) on behalf of full dynticks CPUs. It must remain
online when nohz full is enabled. There is a priority set to every
notifier_blocks:

workqueue_cpu_up > tick_nohz_cpu_down > workqueue_cpu_down

So tick_nohz_cpu_down callback failed when down prepare cpu 0, and
notifier_blocks behind tick_nohz_cpu_down will not be called any
more, which leads to workers are actually not unbound. Then hotplug
state machine will fallback to undo and online cpu 0 again. Workers
will be rebound unconditionally even if they are not unbound and
trigger the warning in this progress.

This patch fix it by catching !DISASSOCIATED to avoid rebind bound
workers.

Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NicholasWalton pushed a commit to Cryocon/linux-at91 that referenced this pull request Jan 31, 2021
@gregkh
drm/gma500: Fix possible out of bounds read
bacc6d7 
commit 7ccca1d upstream.

Fix possible out of bounds read, by adding missing comma.
The code may read pass the end of the dsi_errors array
when the most significant bit (bit linux4sam#31) in the intr_stat register
is set.
This bug has been detected using CppCheck (static analysis tool).

Signed-off-by: Itai Handler <itai_handler@hotmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cristibirsan pushed a commit that referenced this pull request Aug 6, 2021
@asj @gregkh
btrfs: check for missing device in btrfs_trim_fs
755971d 
commit 16a200f upstream.

A fstrim on a degraded raid1 can trigger the following null pointer
dereference:

  BTRFS info (device loop0): allowing degraded mounts
  BTRFS info (device loop0): disk space caching is enabled
  BTRFS info (device loop0): has skinny extents
  BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing
  BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing
  BTRFS info (device loop0): enabling ssd optimizations
  BUG: kernel NULL pointer dereference, address: 0000000000000620
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 4574 Comm: fstrim Not tainted 5.13.0-rc7+ #31
  Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
  RIP: 0010:btrfs_trim_fs+0x199/0x4a0 [btrfs]
  RSP: 0018:ffff959541797d28 EFLAGS: 00010293
  RAX: 0000000000000000 RBX: ffff946f84eca508 RCX: a7a67937adff8608
  RDX: ffff946e8122d000 RSI: 0000000000000000 RDI: ffffffffc02fdbf0
  RBP: ffff946ea4615000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff946e8122d960 R12: 0000000000000000
  R13: ffff959541797db8 R14: ffff946e8122d000 R15: ffff959541797db8
  FS:  00007f55917a5080(0000) GS:ffff946f9bc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000620 CR3: 000000002d2c8001 CR4: 00000000000706f0
  Call Trace:
  btrfs_ioctl_fitrim+0x167/0x260 [btrfs]
  btrfs_ioctl+0x1c00/0x2fe0 [btrfs]
  ? selinux_file_ioctl+0x140/0x240
  ? syscall_trace_enter.constprop.0+0x188/0x240
  ? __x64_sys_ioctl+0x83/0xb0
  __x64_sys_ioctl+0x83/0xb0

Reproducer:

  $ mkfs.btrfs -fq -d raid1 -m raid1 /dev/loop0 /dev/loop1
  $ mount /dev/loop0 /btrfs
  $ umount /btrfs
  $ btrfs dev scan --forget
  $ mount -o degraded /dev/loop0 /btrfs

  $ fstrim /btrfs

The reason is we call btrfs_trim_free_extents() for the missing device,
which uses device->bdev (NULL for missing device) to find if the device
supports discard.

Fix is to check if the device is missing before calling
btrfs_trim_free_extents().

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
noglitch pushed a commit that referenced this pull request Nov 18, 2021
@gregkh
selftests/bpf: Fix perf_buffer test on system with offline cpus
e658d59 
[ Upstream commit d412137 ]

The perf_buffer fails on system with offline cpus:

  # test_progs -t perf_buffer
  test_perf_buffer:PASS:nr_cpus 0 nsec
  test_perf_buffer:PASS:nr_on_cpus 0 nsec
  test_perf_buffer:PASS:skel_load 0 nsec
  test_perf_buffer:PASS:attach_kprobe 0 nsec
  test_perf_buffer:PASS:perf_buf__new 0 nsec
  test_perf_buffer:PASS:epoll_fd 0 nsec
  skipping offline CPU #24
  skipping offline CPU #25
  skipping offline CPU #26
  skipping offline CPU #27
  skipping offline CPU #28
  skipping offline CPU #29
  skipping offline CPU #30
  skipping offline CPU #31
  test_perf_buffer:PASS:perf_buffer__poll 0 nsec
  test_perf_buffer:PASS:seen_cpu_cnt 0 nsec
  test_perf_buffer:FAIL:buf_cnt got 24, expected 32
  Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED

Changing the test to check online cpus instead of possible.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021114132.8196-2-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
1 participant
@Dambe