Skip to content

Broadwell

Thomas Gruber edited this page Mar 2, 2023 · 9 revisions

Architecture specific notes for Intel® Broadwell

Performance groups

Intel® Broadwell Performance groups

Events

The input file for the events on Intel® Broadwell can be found here.

Counters

Core-local counters

Fixed-purpose counters

Since the Core2 microarchitecture, Intel® provides a set of fixed-purpose counters. Each can measure only one specific event.

Counters
Counter name Event name
FIXC0 INSTR_RETIRED_ANY
FIXC1 CPU_CLK_UNHALTED_CORE
FIXC2 CPU_CLK_UNHALTED_REF
Available Options
Option Argument Description Comment
anythread N Set bit 2+(index*4) in config register
kernel N Set bit (index*4) in config register

General-purpose counters

The Intel® Broadwell microarchitecture provides 4 general-purpose counters consisting of a config and a counter register.

Counters
Counter name Event name
PMC0 *
PMC1 *
PMC2 *
PMC3 *
PMC4 * (only available without HyperThreading)
PMC5 * (only available without HyperThreading)
PMC6 * (only available without HyperThreading)
PMC7 * (only available without HyperThreading)

WARNING: Counters PMC4-7 can only be measured if the 'kernel' option is set. LIKWID does that automatically for these counters. Be aware that the registers are incremented in user- as well as in kernel-space and thus probably have much higher counts. For comparisons with on event in PMC0-3 it is recommended to add the 'kernel' option there as well. (src: Intel® Xeon® E7-8800/4800 v4 Processor Product Family Spec Update)

Available Options
Option Argument Description Comment
edgedetect N Set bit 18 in config register
kernel N Set bit 17 in config register
anythread N Set bit 21 in config register
threshold 8 bit hex value Set bits 24-31 in config register
invert N Set bit 23 in config register
in_transaction N Set bit 32 in config register Only available if Intel® Transactional Synchronization Extensions are available
in_transaction_aborted N Set bit 33 in config register Only counter PMC2 and only if Intel® Transactional Synchronization Extensions are available
Special handling for events

The Intel® Broadwell microarchitecture provides measureing of offcore events in PMC counters. Therefore the stream of offcore events must be filtered using the OFFCORE_RESPONSE registers. The Intel® Broadwell microarchitecture has two of those registers. LIKWID defines some events that perform the filtering according to the event name. Although there are many bitmasks possible, LIKWID natively provides only the ones with response type ANY. Own filtering can be applied with the OFFCORE_RESPONSE_0_OPTIONS and OFFCORE_RESPONSE_1_OPTIONS events. Only for those events two more counter options are available:

Option Argument Description Comment
match0 16 bit hex value Input value masked with 0x8FFF and written to bits 0-15 in the OFFCORE_RESPONSE register Check the Intel® Software Developer System Programming Manual, Vol. 3, Chapter Performance Monitoring and https://download.01.org/perfmon/BDW.
match1 22 bit hex value Input value is written to bits 16-37 in the OFFCORE_RESPONSE register Check the Intel® Software Developer System Programming Manual, Vol. 3, Chapter Performance Monitoring and https://download.01.org/perfmon/BDW.
The event MEM_TRANS_RETIRED_LOAD_LATENCY is not available because it needs programming of PEBS registers. PEBS is a kernel-level measurement facility for performance monitoring. Although we can program it from user-space, the results are always 0.

Thermal counter

The Intel® Broadwell microarchitecture provides one register for the current core temperature.

Counters
Counter name Event name
TMP0 TEMP_CORE

Socket-wide counters

Energy counters

The Intel® Broadwell microarchitecture provides measurements of the current energy consumption through the RAPL interface.

Counters
Counter name Event name
PWR0 PWR_PKG_ENERGY
PWR1 PWR_PP0_ENERGY
PWR2 PWR_PP1_ENERGY
PWR3 PWR_DRAM_ENERGY

Uncore global counters

The Intel® Broadwell microarchitecture provides measurements for the global uncore management unit.

Counters
Counter name Event name
UBOX0 *
UBOX1 *
UBOXFIX UNCORE_CLOCK
Available Options
Option Argument Description Comment
edgedetect N Set bit 18 in config register
threshold 8 bit hex value Set bits 24-28 in config register
invert N Set bit 23 in config register

Last level cache counters

The Intel® Broadwell microarchitecture provides measurements for the last level cache segments.

Counters
Counter name Event name
CBOX<0-3>C0 *
CBOX<0-3>C1 *
Available Options
Option Argument Description Comment
edgedetect N Set bit 18 in config register
threshold 8 bit hex value Set bits 24-28 in config register
invert N Set bit 23 in config register
Clone this wiki locally