Add new settings categories and clean up

Copy to SD Card root directory to update/Language Packs/language_am.ini

@@ -1,5 +1,5 @@
 #### Language Code:AM
-## Language Version:20210130
+## Language Version:20210217
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -8,30 +8,20 @@ label_baudrate:BaudRate
 label_language:Հայերեն
 label_rotate_ui:Rotate UI
 label_terminal_ack:Show ACK in Terminal
-label_invert_x_axis:Invert X Axis
-label_invert_y_axis:Invert Y Axis
-label_invert_z_axis:Invert Z Axis
 label_persistent_info:Persistent Status Info
 label_file_list_mode:Files viewer List Mode
 label_ack_notification:ACK notification style
-label_default_mode:Default Mode
 label_serial_always_on:Serial Always ON
 label_marlin_show_title:Marlin Mode Title Support
 label_marlin_fullscreen:Marlin mode in fullscreen
 label_marlin_type:Marlin Mode Type
 label_move_speed:Move speed(X Y Z)
 label_auto_load_leveling:Auto Save Load Leveling
-label_touchmi_sensor:TouchMI
-label_onboard_sd_support:Onboard SD Card Support
-label_m27_always_active:M27 Always Active
-label_long_filename_support:Long File Names Support
 label_fan_speed_percent:Fan Speed As Percentage
 label_xy_offset_probing:XY Offset Probing Support
 label_z_steppers_alignment:Z Steppers Auto-Alignment
 label_ps_on:Auto Power
-label_ps_on_active_high:Power Supply Active HIGH
 label_fil_runout:Filament sensor
-label_fil_runout_inverting:Inverted Filament Runout Logic
 label_pl_recovery_en:Power loss recovery
 label_pl_recovery_home:Power Loss Recovery Homing
 label_btt_mini_ups:BTT UPS Support
@@ -41,9 +31,9 @@ label_alert_sound:Popups and Alerts
 label_heater_sound:Heater notification
 label_knob_led_color:Rotary Knob LED
 label_knob_led_idle:Rotary Knob LED idle
-label_lcd_brightness:LCD Brightness
-label_lcd_idle_brightness:LCD Brightness dim
-label_lcd_idle_delay:LCD dim idle timer
+label_lcd_brightness:Brightness
+label_lcd_idle_brightness:Idle brightness
+label_lcd_idle_delay:Idle timeout
 label_start_gcode_enabled:Start Gcode before print
 label_end_gcode_enabled:End Gcode after print
 label_cancel_gcode_enabled:Cancel Gcode
@@ -57,7 +47,7 @@ label_home_offset:Home Offset
 label_fwretract:FW Retraction
 label_fwrecover:FW Retraction Recover
 label_retract_auto:Auto Firmware Retract
-label_offset_tool:Offset 2nd Nozzle
+label_hotend_offset:Offset 2nd Nozzle
 label_probe_offset:Probe Offset
 label_lin_advance:Linear Advance
 label_current_setting:Driver Current (mA)
@@ -214,6 +204,7 @@ label_extrude:Հալել
 label_settings:Կարգավորումներ
 label_screen_settings:Screen
 label_machine_settings:Machine
+label_marlin_mode_settings:MarlinMode
 label_feature_settings:Feature
 label_sound:Sound
 label_rgb_settings:LED Color
@@ -254,8 +245,8 @@ label_load_unload_short:(Un)Load
 label_touchscreen_adjust:TSC Adjust
 label_more:More
 label_screen_info:Info
-label_simulator_bg_color:Marlin simulator background color
-label_simulator_font_color:Marlin simulator font color
+label_bg_color:Background color
+label_font_color:Font color
 label_percentage:Percentage
 label_percentage_speed:Արագություն
 label_percentage_flow:Flow

Copy to SD Card root directory to update/Language Packs/language_ca.ini

@@ -1,5 +1,5 @@
 #### Language Code:CA
-## Language Version:20210130
+## Language Version:20210217
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -8,30 +8,20 @@ label_baudrate:Velocitat de transmissió
 label_language:Català
 label_rotate_ui:Rotar
 label_terminal_ack:Mostra ACK a la terminal
-label_invert_x_axis:Invertir eix X
-label_invert_y_axis:Invertir eix Y
-label_invert_z_axis:Invertir eix Z
 label_persistent_info:Informació d'estat persistent
 label_file_list_mode:Mode de visualització de fitxers
 label_ack_notification:ACK notification style
-label_default_mode:Default Mode
 label_serial_always_on:Serial Always ON
 label_marlin_show_title:Marlin Mode Title Support
 label_marlin_fullscreen:Mode Marlin a pantalla completa
 label_marlin_type:Marlin Mode Type
 label_move_speed:Velocitat de moviment(X Y Z)
 label_auto_load_leveling:Auto Save Load Leveling
-label_touchmi_sensor:TouchMI
-label_onboard_sd_support:Onboard SD Card Support
-label_m27_always_active:M27 Always Active
-label_long_filename_support:Long File Names Support
 label_fan_speed_percent:Fan Speed As Percentage
 label_xy_offset_probing:XY Offset Probing Support
 label_z_steppers_alignment:Z Steppers Auto-Alignment
 label_ps_on:Apag. aut.
-label_ps_on_active_high:Power Supply Active HIGH
 label_fil_runout:Sensor de filament
-label_fil_runout_inverting:Inverted Filament Runout Logic
 label_pl_recovery_en:Recuperació de pèrdua d’energia
 label_pl_recovery_home:Power Loss Recovery Homing
 label_btt_mini_ups:BTT UPS Support
@@ -41,7 +31,7 @@ label_alert_sound:Popups and Alerts
 label_heater_sound:Heater notification
 label_knob_led_color:Perilla rotativa LED
 label_knob_led_idle:Rotary Knob LED idle
-label_lcd_brightness:Lluminositat LCD
+label_lcd_brightness:Lluminositat
 label_lcd_idle_brightness:Dim Lluminositat LCD
 label_lcd_idle_delay:Temporitzador inactiu LCD
 label_start_gcode_enabled:Enviar Gcode inicial
@@ -57,7 +47,7 @@ label_home_offset:Home Offset
 label_fwretract:Retracció de FW
 label_fwrecover:Recuperació de Retracció de FW
 label_retract_auto:Auto Firmware Retract
-label_offset_tool:Offset 2nd Nozzle
+label_hotend_offset:Offset 2nd Nozzle
 label_probe_offset:Sonda Compensar
 label_lin_advance:Avanç Lineal
 label_current_setting:Corrent del Driver (mA)
@@ -214,6 +204,7 @@ label_extrude:Extruir
 label_settings:Configura
 label_screen_settings:Pantalla
 label_machine_settings:Màquina
+label_marlin_mode_settings:MarlinMode
 label_feature_settings:Afegits
 label_sound:Sound
 label_rgb_settings:Color LED
@@ -254,8 +245,8 @@ label_load_unload_short:(Un)Load
 label_touchscreen_adjust:Calibrar
 label_more:Més
 label_screen_info:Informar
-label_simulator_bg_color:Color de fons del simulador Marlin
-label_simulator_font_color:Color de lletra de simulador Marlin
+label_bg_color:Color de fons
+label_font_color:Color de lletra
 label_percentage:Percentatge
 label_percentage_speed:Velocitat
 label_percentage_flow:Flux

Copy to SD Card root directory to update/Language Packs/language_cn.ini

@@ -1,5 +1,5 @@
 #### Language Code:CN
-## Language Version:20210130
+## Language Version:20210217
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -8,30 +8,20 @@ label_baudrate:波特率
 label_language:简体中文
 label_rotate_ui:旋转界面
 label_terminal_ack:在G-code终端中显示温度信息
-label_invert_x_axis:翻转X轴
-label_invert_y_axis:翻转Y轴
-label_invert_z_axis:翻转Z轴
 label_persistent_info:顶部温度信息
 label_file_list_mode:文件浏览列表模式
 label_ack_notification:ACK 弹窗类型
-label_default_mode:默认的模式
 label_serial_always_on:串口常开
 label_marlin_show_title:Marlin模式显示标题
 label_marlin_fullscreen:全屏显示Marlin模式
 label_marlin_type:Marlin模式类型
 label_move_speed:移动速度(X Y Z)
 label_auto_load_leveling:自动保存/加载调平数据
-label_touchmi_sensor:TouchMI
-label_onboard_sd_support:Marlin存储卡支持
-label_m27_always_active:持续发送M27
-label_long_filename_support:Marlin长文件名支持
 label_fan_speed_percent:百分比显示风扇速度
 label_xy_offset_probing:XY Offset Probing Support
 label_z_steppers_alignment:Z轴多电机自动对齐
 label_ps_on:自动关机
-label_ps_on_active_high:低电平关机
 label_fil_runout:耗材检测传感器
-label_fil_runout_inverting:翻转耗材检测逻辑
 label_pl_recovery_en:断电续打
 label_pl_recovery_home:断电续打前归零
 label_btt_mini_ups:启用BTT UPS
@@ -57,7 +47,7 @@ label_home_offset:原点偏移量
 label_fwretract:FW Retraction
 label_fwrecover:FW Retraction Recover
 label_retract_auto:FW自动回抽
-label_offset_tool:第2个喷头的偏移量
+label_hotend_offset:第2个喷头的偏移量
 label_probe_offset:探针偏移量
 label_lin_advance:Linear Advance
 label_current_setting:TMC驱动电流设置
@@ -214,6 +204,7 @@ label_extrude:挤出
 label_settings:设置
 label_screen_settings:屏幕设置
 label_machine_settings:机器设置
+label_marlin_mode_settings:MarlinMode
 label_feature_settings:功能设置
 label_sound:声音
 label_rgb_settings:灯光颜色
@@ -254,8 +245,8 @@ label_load_unload_short:进/退料
 label_touchscreen_adjust:触屏校准
 label_more:更多
 label_screen_info:关于
-label_simulator_bg_color:Marlin模式背景颜色
-label_simulator_font_color:Marlin模式字体颜色
+label_bg_color:背景颜色
+label_font_color:字体颜色
 label_percentage:百分比
 label_percentage_speed:速度百分比
 label_percentage_flow:流量百分比

Copy to SD Card root directory to update/Language Packs/language_cz.ini

@@ -1,5 +1,5 @@
 #### Language Code:CZ
-## Language Version:20210130
+## Language Version:20210217
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -8,30 +8,20 @@ label_baudrate:Serial Port
 label_language:Čeština
 label_rotate_ui:Otočit UI
 label_terminal_ack:zobrazit ACK Terminálu
-label_invert_x_axis:Otočit osu X
-label_invert_y_axis:Otočit osu Y
-label_invert_z_axis:Otočit osu Z
 label_persistent_info:Zobrazení stavových ikon
 label_file_list_mode:Soubory jako seznam
 label_ack_notification:Styl oznámení ACK
-label_default_mode:Defaultní mód
 label_serial_always_on:Seriový port vždy ON
 label_marlin_show_title:Zobrazit tytulek Marlin
 label_marlin_fullscreen:Fullscreen režim Marlin
 label_marlin_type:Typ Marlin Modu
 label_move_speed:Rychlost pohybu X Y Z
 label_auto_load_leveling:Automaticky Leveling
-label_touchmi_sensor:TouchMI
-label_onboard_sd_support:Podpora onboard SD
-label_m27_always_active:M27 Vždy aktivní
-label_long_filename_support:Podpora dlouhých názvů
 label_fan_speed_percent:Rychlost ventilátoru v %
 label_xy_offset_probing:Podpora XY Offset sondy
 label_z_steppers_alignment:Z Motor Auto-Alignment
 label_ps_on:Auto.vypnutí
-label_ps_on_active_high:Napájení aktivní HIGH
 label_fil_runout:Senzor filamentu
-label_fil_runout_inverting:Otoč logiku senzoru filam.
 label_pl_recovery_en:Obnova po ztrátě napájení
 label_pl_recovery_home:Spuštění obnovení napájení
 label_btt_mini_ups:Podpora BTT UPS
@@ -57,7 +47,7 @@ label_home_offset:Home Offset
 label_fwretract:FW Zatažení
 label_fwrecover:FW Obnovení
 label_retract_auto:Auto Firmware Retract
-label_offset_tool:Offset 2.trysky
+label_hotend_offset:Offset 2.trysky
 label_probe_offset:Offset sondy
 label_lin_advance:Linear Advance
 label_current_setting:Proud motorů (mA)
@@ -214,6 +204,7 @@ label_extrude:Filament
 label_settings:Nastavení
 label_screen_settings:Displej
 label_machine_settings:Tiskárna
+label_marlin_mode_settings:MarlinMode
 label_feature_settings:Vlastnosti
 label_sound:Zvuk
 label_rgb_settings:Barva LED
@@ -254,8 +245,8 @@ label_load_unload_short:Vysunout
 label_touchscreen_adjust:Kalibrovat
 label_more:Více
 label_screen_info:Info
-label_simulator_bg_color:Marlin - Barva pozadí
-label_simulator_font_color:Marlin - Barva písma
+label_bg_color:Barva pozadí
+label_font_color:Barva písma
 label_percentage:Procenta
 label_percentage_speed:Rychlost
 label_percentage_flow:Průtok

Copy to SD Card root directory to update/Language Packs/language_de.ini

@@ -1,5 +1,5 @@
 #### Language Code:DE
-## Language Version:20210130
+## Language Version:20210217
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -8,30 +8,20 @@ label_baudrate:Baudrate
 label_language:Deutsch
 label_rotate_ui:UI drehen
 label_terminal_ack:Zeige ACK im Terminal
-label_invert_x_axis:Invertiere X-Achse
-label_invert_y_axis:Invertiere Y-Achse
-label_invert_z_axis:Invertiere Z-Achse
 label_persistent_info:Speicherungs-Status
 label_file_list_mode:Dateien als Liste
 label_ack_notification:ACK - Stil
-label_default_mode:Standard Modus
 label_serial_always_on:Seriell Verbind. immer an
 label_marlin_show_title:Marlin Modus Titel anz.
 label_marlin_fullscreen:Marlin Modus im Vollbild
 label_marlin_type:Marlin Modus Typ
 label_move_speed:Geschwindigkeit (XYZ)
 label_auto_load_leveling:Auto Save Load Leveling
-label_touchmi_sensor:TouchMI
-label_onboard_sd_support:Onboard SD aktivieren
-label_m27_always_active:M27 immer aktiv
-label_long_filename_support:lange Dateinamen anzeigen
 label_fan_speed_percent:Lüft. Geschw. in Prozent
 label_xy_offset_probing:XY Offset Probing Support
 label_z_steppers_alignment:Z Stepper Auto-Justierung
 label_ps_on:Auto-aus (PS_ON)
-label_ps_on_active_high:Spannungsvers. Active HIGH
 label_fil_runout:Filament Sensor
-label_fil_runout_inverting:Filament Sensor umkehren
 label_pl_recovery_en:Weitermachen (Stromausfall)
 label_pl_recovery_home:Achsen nullen (Stromausfall)
 label_btt_mini_ups:BTT UPS Support
@@ -41,7 +31,7 @@ label_alert_sound:Popups & Alarme
 label_heater_sound:Ton bei erreichter Temp.
 label_knob_led_color:Drehknopf LED Farbe
 label_knob_led_idle:Drehknopf LED idle Farbe
-label_lcd_brightness:LCD Helligkeit
+label_lcd_brightness:Helligkeit
 label_lcd_idle_brightness:LCD Helligkeit (Standby)
 label_lcd_idle_delay:LCD Timer Standby
 label_start_gcode_enabled:Gcode vor Druck
@@ -57,7 +47,7 @@ label_home_offset:Nullpunkt Versatz
 label_fwretract:FW Rückzug
 label_fwrecover:FW Rückeinschub
 label_retract_auto:Auto-Rückzug (Firmware)
-label_offset_tool:Abstand 2te Düse
+label_hotend_offset:Abstand 2te Düse
 label_probe_offset:Sensor Versatz
 label_lin_advance:Linear Advance
 label_current_setting:Treiber Strom (mA)
@@ -214,6 +204,7 @@ label_extrude:Extruder
 label_settings:Parameter
 label_screen_settings:Bildschirm
 label_machine_settings:Drucker
+label_marlin_mode_settings:MarlinMode
 label_feature_settings:Andere
 label_sound:Töne
 label_rgb_settings:LED Farbe
@@ -254,8 +245,8 @@ label_load_unload_short:(ent)laden
 label_touchscreen_adjust:TSC kalib.
 label_more:Mehr
 label_screen_info:Info
-label_simulator_bg_color:Hintergrundfarbe Marlin
-label_simulator_font_color:Schriftfarbe Marlin
+label_bg_color:Hintergrundfarbe
+label_font_color:Schriftfarbe
 label_percentage:Prozent
 label_percentage_speed:Geschw.
 label_percentage_flow:Fluss