Update 20210115

Auto detect Firmware Type bigtreetech#1507
Fix filenames to work on TFT24 to reset settings after firmware was updated bigtreetech#1499
Add Menu TouchMI bigtreetech#1496
Implemet Print from SD-Crd for RepRapFirmware bigtreetech#1495
Enhanced italian language bigtreetech#1490
Onboard SD print - Long filename; TFT aware of other printing host bigtreetech#1488
Standard deviation - BLTouch repeatability test bigtreetech#1484
Add Z Steppers Auto-Alignment (G34) bigtreetech#1483
Updated ReadMe bigtreetech#1475

Copy to SD Card root directory to update/Language Packs/language_am.ini

@@ -1,5 +1,5 @@
 #### Language Code:AM
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_ca.ini

@@ -1,5 +1,5 @@
 #### Language Code:CA
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_cn.ini

@@ -1,5 +1,5 @@
 #### Language Code:CN
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:点击查看详情
 label_ext_templow:喷头温度低于最小挤出问题 (%d℃).
 label_cold_ext:冷挤出保护, 请加热后再操作
 label_heat_hotend:加热喷头到%d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_cz.ini

@@ -1,5 +1,5 @@
 #### Language Code:CZ
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_de.ini

@@ -1,5 +1,5 @@
 #### Language Code:DE
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_du.ini

@@ -1,5 +1,5 @@
 #### Language Code:DU
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_en.ini

@@ -1,5 +1,5 @@
 #### Language Code:EN
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -179,7 +179,7 @@ label_filament_sensor:Filament sensor
 label_filament_runout:Filament runout!
 label_preheat:Preheat
 label_preheat_both:Both
-label_is_pause:Unable to extrude when\nprinting.\nPause printing?
+label_is_pause:Action not allowed while printing.\n \nPause printing?
 label_auto_shut_down:Auto Power
 label_unifiedmove:Movement
 label_unifiedheat:Heat/Fan
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_es.ini

@@ -1,5 +1,5 @@
 #### Language Code:ES
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_fr.ini

@@ -1,5 +1,5 @@
 #### Language Code:FR
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Cliquez pour en savoir plus.
 label_ext_templow:La température de la buse est inférieure\nà la température minimale (%d℃).
 label_cold_ext:Extrusion à froid empêchée
 label_heat_hotend:Chauffer la buse à %d℃ ?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_gr.ini

@@ -1,5 +1,5 @@
 #### Language Code:GR
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_hu.ini

@@ -1,5 +1,5 @@
 #### Language Code:HU
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -179,7 +179,7 @@ label_filament_sensor:Filament érzékelő
 label_filament_runout:Filament kifutás!
 label_preheat:Előfűtés
 label_preheat_both:Mindkettő
-label_is_pause:Nem sikerült az adagolás\na nyomtatás alatt.\nSzünetelteted a nyomtatást?
+label_is_pause:A művelet tiltva van\na nyomtatás alatt.\nSzünetelteted a nyomtatást?
 label_auto_shut_down:Automata kikapcsolás
 label_unifiedmove:Mozgás
 label_unifiedheat:Fűt/Hűt
@@ -297,4 +297,7 @@ label_click_for_more:Kattints a részletekért.
 label_ext_templow:Fejhőfok alacsonyabb, mint a\nminimális hőfok (%d℃).
 label_cold_ext:Hideg adagolás tiltva
 label_heat_hotend:Fűtöd a fejet %d℃-ra?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_it.ini

@@ -1,5 +1,5 @@
 #### Language Code:IT
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -284,7 +284,7 @@ label_case_light:Luce
 label_load_started:Carico filamento in corso...\nNon sono possibili altre\nazioni fino al termine.\nAttendere prego.
 label_unload_started:Scarico filamento in corso...\nNon sono possibili altre\nazioni fino al termine.\nAttendere prego.
 label_heaters_on:Alcuni riscaldatori sono ancora accesi\nVuoi spegnerli?
-label_print_finished:   Stampa\n   finita.
+label_print_finished:   Stampa\n   ultimata.
 label_main_screen:Principale
 label_previous_print_data:Ultima stampa
 label_file_name:File: 
@@ -297,4 +297,7 @@ label_click_for_more:Clicca per piu' info.
 label_ext_templow:La temperatura dell'hotend\nè al di sotto della temperatura\nminima (%d℃).
 label_cold_ext:Prevenzione dell'estrusione a freddo
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_jp.ini

@@ -1,5 +1,5 @@
 #### Language Code:JP
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_pl.ini

@@ -1,5 +1,5 @@
 #### Language Code:PL
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_pt.ini

@@ -1,5 +1,5 @@
 #### Language Code:PT
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_ru.ini

@@ -1,5 +1,5 @@
 #### Language Code:RU
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Температура сопла ниже\nминимальной (%d℃).
 label_cold_ext:Экструзия холодным\nсоплом запрещена
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_sk.ini

@@ -1,5 +1,5 @@
 #### Language Code:SK
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_sl.ini

@@ -1,5 +1,5 @@
 #### Language Code:SL
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_tc.ini

@@ -1,5 +1,5 @@
 #### Language Code:TC
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_tr.ini

@@ -1,5 +1,5 @@
 #### Language Code:TR
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
 label_cold_ext:Cold extrusion prevented
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/Language Packs/language_uk.ini

@@ -1,5 +1,5 @@
 #### Language Code:UK
-## Language Version:20201218
+## Language Version:20210113
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -297,4 +297,7 @@ label_click_for_more:Click for more.
 label_ext_templow:Температура хотенду нижче\nмінімальної температури (%d℃).
 label_cold_ext:Убережено від холодної екструзії.
 label_heat_hotend:Heat hotend to %d℃?
+label_z_align:Z Align
+label_init:Init
+label_touchmi:TouchMi
 

Copy to SD Card root directory to update/config.ini

@@ -270,6 +270,13 @@ ext_speed:S60 N600 F1200
 #   Options: [enable: 1, disable: 0]
 auto_load_leveling:1
 
+#### TouchMI settings (on ABL menu)
+# Enable this option for settings TouchMI sensor on ABL Menu.
+# ( Init, Zoffset, Save, test)
+# Options: [enable:1, disable:0]
+#
+touchmi_sensor:0
+
 #### Onboard / Printer SD Card Support
 # On Marlin firmware, the TFT will auto-detect Onboard SD Card.
 # Auto-detect is not available for other firmwares like Smoothieware.
@@ -362,6 +369,15 @@ level_feedrate:XY6000 Z6000
 #   Options: [enable: 1, disable: 0]
 xy_offset_probing:1
 
+## Z Steppers Auto-Alignment
+# It allows to align multiple Z stepper motors using a bed probe by probing one position per stepper.
+# Enable this setting to show icon on ABL menu which allows to run G34 command.
+# Requires Z_STEPPER_AUTO_ALIGN (in Configuration_adv.h)
+# Note: Only for Marlin printers with one stepper driver per Z stepper motor and no Z timing belt. Also requires a BLTouch.
+#
+#   Options: [enable: 1, disable: 0]
+z_steppers_alignment:0
+
 #### Preheat Temperatures
 #   Preheat name format: [preheat_nameX:<name (max 7 characters)>]
 #   Preheat temperature format: [preheat_tempX:T<hotend temp> B<bed temp>]