[FS][arm64] support new boars s5800-48t4s and s5800-48t8s-mars8p (son…

…ic-net#12994)

Adding platform support for FS s5800-48t4s and s5800-48t8s-mars8p.

Both s5800-48t4s and s5800-48t8s-mars8p have 48 * 10/100/1000 Base-T ports, 4 * 10GE SFP+ Ports on Centec TsingMa.
s5800-48t4s is different from s5800-48t8s-mars8p in that:

The phy chip used by s5800-48t4s is Marvell 88e1680;
The phy chip used by s5800-48t4s-mars8p is Centec ctc21108;

device/fs/arm64-fs_s5800_48t4s-r0/S5800-48t4s-mars8p/S5800-48t4s-mars8p-chip-profile.txt

@@ -0,0 +1,131 @@
+#-----------------  SDK Feature Support --------------
+[MPLS_SUPPORT]     = 1;
+[APS_SUPPORT]      = 1;
+[OAM_SUPPORT]      = 1;
+[PTP_SUPPORT]      = 0;
+[SYNCE_SUPPORT]    = 0;
+[STACKING_SUPPORT] = 1;
+[BPE_SUPPORT]      = 0;
+[IPFIX_SUPPORT]    = 1;
+[MONITOR_SUPPORT]  = 1;
+[OVERLAY_SUPPORT]  = 1;
+[EFD_SUPPORT]      = 1;
+[FCOE_SUPPORT]     = 0;
+[TRILL_SUPPORT]    = 0;
+[WLAN_SUPPORT]     = 1;
+[NPM_SUPPORT]      = 1;
+[DOT1AE_SUPPORT]   = 1;
+[DTEL_SUPPORT]     = 0;
+[FDBSYNC_SUPPORT]   = 1;
+
+#-----------------  Chip Init Parameter --------------
+#Local chip number and global chip id
+[Local chip_num] = 1
+[Local chip0]    = 0
+[Local chip1]    = 1
+
+#Cut through mode 0: Disable; 1:10/40/100G; 2:1/10/100G; 3:1/10/40G; other:Flex, refer to CUT_THROUGH_BITMAP
+[CUT_THROUGH_SPEED]  = 0
+#Flex cut through mode, speed enable by bitmap, refer to ctc_port_speed_t, Notice: 10M/100M/1G treat as the same speed
+[CUT_THROUGH_BITMAP]  = 0
+
+#Network cpu port
+[CPU_NETWORK_PORT_EN] = 0
+[CPU_NETWORK_PORT_ID] = 47
+
+#Enable parity error and multi-bit ecc recover
+[ECC_RECOVER_EN] = 0
+[TCAM_SCAN_EN] = 0
+
+#-----------------  KNET Init Parameter --------------
+[KNET_EN] = 0
+
+#-----------------  RESILIENT HASH Init Parameter --------------
+[RESILIENT_HASH_EN] = 0
+
+#-----------------  FTM Init Parameter --------------
+#0: default; 1: layer3; 2: ipv6
+[FTM Profile] = 0
+
+#-----------------  Interrupt Init Parameter --------------
+#0: pin, 1: msi
+[Interrupt_mode] = 1
+[IRQ]            = 69
+
+#-----------------  NextHop Init Parameter --------------
+#0: SDK work in pizzbox (single chip system), 1: SDK work in multi-chip system
+[Nexthop Edit Mode]       = 0
+[External Nexthop Number] = 16384
+[MPLS Tunnel Number]      = 1024
+
+#-----------------  L2 Init Parameter --------------
+[FDB Hw Learning] = 0
+[Logic Port Num] = 1024
+#0: 128 instance per port, 1: 64 instance per port, 2: 32 instance per port
+[STP MODE] = 0
+[MAX_FID_NUM] = 5120
+#STEP:Sync fdb count per second
+[FDB_SYNC_STEP] = 100
+
+#-----------------  Port Init Parameter --------------
+[PORT_STATS_ACL_EN]     = 0
+
+#-----------------  Stats Init Parameter --------------
+[STATS_PORT_EN]         = 0
+[STATS_ECMP_EN]         = 0
+
+#-----------------  BPE Init Parameter --------------
+[BPE_BR_PORT_EXTENDER_EN]  = 0
+[BPE_BR_UC_MAX_ECID]       = 1024
+[BPE_BR_MC_MAX_ECID]       = 4096
+[BPE_BR_PORT_BASE]         = 0
+
+#-----------------  Ipuc Init Parameter --------------
+#0: tcam use prefix 16; 1: tcam use prefix 8
+[IPUC_TCAM_PREFIX_8] = 1
+
+#-----------------  QoS Init Parameter --------------
+#QoS policer number support 1K/2K/4K/8K, default 4K
+[QOS_POLICER_NUM] = 4096
+#QoS port queue number support 16/8/8 BPE/4 BPE,
+#When resrc_profile.cfg exist, queue number valid,
+#Default 8 queue mode
+#8 queue = 8
+#16 queue = 16
+#4 queue BPE = 17
+#8 queue BPE = 18
+[QOS_PORT_QUEUE_NUM] = 8
+#QoS port extend queue number support 0/4, default 0
+[QOS_PORT_EXT_QUEUE_NUM] = 0
+#QoS CPU reason queue number support 128/64/32, default 128
+[QOS_CPU_QUEUE_NUM] = 128
+[QOS_INGRESS_VLAN_POLICER_NUM] = 0
+[QOS_EGRESS_VLAN_POLICER_NUM] = 0
+[QOS_POLICER_MERGE_MODE] = 0
+#QOS service queue mode, default 0,0:logic scr port + dstport enq 1:service id + dstport enq
+[QOS_SERVICE_QUEUE_MODE] = 0
+#Global enable logic dst port + dstport enq
+[QOS_SERVICE_QUEUE_EGRESS_EN] = 0
+
+#-----------------  Stacking Init Parameter --------------
+#0: normal mode; 1: spine-leaf mode
+[FABRIC MODE] = 0
+[STACKING VERSION] = 1
+
+#-----------------  SDK&SAI Debug Level Init Parameter --------------
+# SDK_DEBUG_TO_SYSLOG should be enable, 1 : enable ; 0 : disable
+[SDK_DEBUG_TO_SYSLOG] = 0;
+
+# Level same as SAI_LOG_LEVEL :  0 : debug ; 1 : info ;  2 : notice ; 3 : warning ; 4 : error ; 5 : critical
+[DEBUG_LOG_LEVEL_SDK] = 1 ;
+[DEBUG_LOG_LEVEL_SAI] = 0;
+
+# CTC_ERROR_RETURN(g_error_on) in SDK to syslog, 1 : enable ; 0 : disable
+[DEBUG_SDK_G_ERROR_ON] = 0;
+
+# SDK debug module id (scope from 1 ~47,detail to see sdk_debug_module_t.csv),default all modules
+[DEBUG_SDK_MODULE] = 0;
+
+# part of SDK, 1 : enable  in part ; 0 : disable in part
+[DEBUG_SDK_CTC] = 0;
+[DEBUG_SDK_SYS] = 1;