Skip to content

This bundle makes it easy to handle eZ Platform content upgrades/migrations

License

Notifications You must be signed in to change notification settings

xrow/ezmigrationbundle

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Kaliop eZ-Migration Bundle

This bundle makes it easy to programmatically deploy changes to eZPlatform / eZPublish 5 database structure and contents.

It is inspired by the DoctrineMigrationsBundle

You can think of it as the grandson of the legacy ezxmlinstaller extension.

Requirements

  • PHP 5.6 or later.

  • eZPublish Enterprise 5.4 or Community 2014.11 or later.

Installation

In either require or require-dev at the end of the bundle list in the composer.json file add:

"kaliop/ezmigrationbundle": "^3.0"

Save it and run

composer update --dev kaliop/ezmigrationbundle

This will install the bundle and all its dependencies.

Please make sure that you have the bundle registered in the kernel as well. Check ezpublish/EzPublishKernel.php

The registerBundles method should look similar to:

public function registerBundles()
{
    $bundles = array(
        ... more stuff here ...
        new \Kaliop\eZMigrationBundle\EzMigrationBundle()
    );
}

Checking that the bundle is installed correctly

If you run php ezpublish/console you should see the following new commands in the list:

kaliop
  kaliop:migration:generate
  kaliop:migration:status
  kaliop:migration:migrate
  kaliop:migration:migration

This indicates that the bundle has been installed and registered correctly.

Note: the command kaliop:migration:update is kept around for compatibility, and will be removed in future versions.

Updating the bundle

To get the latest version, you can update the bundle to the latest available version by using composer

composer update kaliop/ezmigrationbundle

Upgrading from version 2.x to version 3

  • Make sure you read carefully all the BC notes in the release notes

  • Nothing else is required, unless you have one of the following:

    • migrations definitions generated using extension versions 1.x or 2.x, yet to be applied
    • code which extends the migration bundle code/apis

    For both cases, the fix is to apply manual changes to your code/migrations.

Upgrading from version 1.x to version 2

Please read the dedicated documentation page

Getting started

All commands accept the standard Symfony/eZPublish 5 options, although some of them might not have any effect on the command's execution.

Generating a new, empty migration definition file

The bundle provides a command to easily generate a new blank migration definition file, stored in a specific bundle.

For example:

php ezpublish/console kaliop:migration:generate --format=yml MyProjectBundle

The above command will place a new yml skeleton file in the MigrationVersions directory of the MyProjectBundle bundle.

If the directory does not exists then the command will create it for you, as long as the bundle does exist and is registered. If the command is successful it will create a new yml file named with the following pattern: YYYYMMDDHHMMSS_placeholder.yml. You are encouraged to rename the file and change the placeholder part to something more meaningful, but please keep the timestamp part and underscore, as well as the extension.

(the contents of the skeleton Yaml file are stored as twig template)

Listing all migrations and their status

To see all the migrations definitions available in the system and whether they have been applied or not simply run the status command in your eZPublish 5 root directory:

php ezpublish/console kaliop:migration:status

The list of migrations which have been already applied is stored in the database, in a table named kaliop_migrations. The bundle will automatically create the table if needed. In case you need to use a different name for that table, you can change the Symfony parameter ez_migration_bundle.table_name.

Applying migrations

To apply all available migrations run the migrate command in your eZPublish 5 root directory:

 php ezpublish/console kaliop:migration:migrate

NB: if you just executed the above command and got an error message because the migration definition file that you had just generated is invalid, do not worry - that is by design. Head on to the next paragraph...

Applying a single migration file

To apply a single migration run the migrate command passing it the path to its definition, as follows:

php ezpublish/console kaliop:migration:migrate --path=src/MyNamespace/MyBundle/MigrationsVersions/20160803193400_a_migration.yml

Editing migration files

So far so good, but what kind of actions can be actually done using a migration?

Each migration definition consists of a series of steps, where each step defines an action.

A simple example of a migration to create a 'folder' content is:

-
    mode: create
    type: content
    content_type: folder
    parent_location: 2
    attributes:
        name: hello world

In a Yaml migration, you can define the following types of actions:

  • creation, update and deletion of Contents
  • creation, update and deletion of Locations
  • creation, update and deletion of Users
  • creation, update and deletion of UserGroups
  • creation, update and deletion of Roles
  • creation, update and deletion of ContentTypes
  • creation and deletion of ContentTypeGroups
  • creation, update and deletion of ObjectStates
  • creation, update and deletion of ObjectStateGroups
  • creation, update and deletion of Sections
  • creation and deletion of Languages
  • creation and deletion of of Tags (from the Netgen Tags Bundle)

The docs describing all supported parameters are in the DSL Language description

Custom migrations

For more specific needs, you can also use 2 other types of migrations:

  • SQL migrations
  • PHP migrations

SQL migrations

Example command to generate an SQL migration definition:

 php ezpublish/console kaliop:migration:generate MyBundle create-new-table --format=sql

This will create the following file, which you are free to edit:

.../MyBundle/Migrations/2016XXYYHHMMSS_mysql_create-new-table.sql

NB if you rename the sql file, keep in mind that the type of database to which it is supposed to apply is the part of the filename between the first and second underscore characters. If you later try to execute that migration on an eZPublish installation running on, say, PostgreSQL, the migration will fail. You are of course free to create a specific SQL migration for a different database type.

The Migration bundle itself imposes no limitations on the type of databases supported, but as it is based on the Doctrine DBAL, it will only work on the databases that Doctrine supports.

PHP migrations

If the type of manipulation that you need to do is too complex for either YML or SQL, you can use a php class as migration definition. To generate a PHP migration definition, execute:

 php ezpublish/console kaliop:migration:generate MyBundle AMigrationClass --format=php

This will create the following file, which you are free to edit:

.../MyBundle/Migrations/2016XXYYHHMMSS_AMigrationClass.php

As you can see in the generated definition, the php class to be used for a migration needs to implement a specific interface. The Symfony DIC container is passed to the migration class so that it can access from it all the services, parameters and other thing that it needs.

For a more detailed example of a migration definition done in PHP, look in the MigrationVersions folder of this very bundle.

NB if you rename the php file, keep in mind that the filename and the name of the class it contains are tied - the standard autoloading mechanism of the application does not apply when loading the migration definition. This is also the reason why the php classes used as migrations should not use namespaces.

Re-executing failed migrations

The easiest way to re-execute a migration in 'failed' status, is to remove it from the migrations table:

php ezpublish/console kaliop:migration:migration migration_name --delete

After removing the information about the migration form the migrations table, running the migrate command will execute it again.

Usage of transactions / rolling back changes

By default the bundle runs each migration in a database transaction. This means that if a step fails, all of the previous steps get rolled back, and the database is left in its original state. This is a safety feature built in by design;

  • if you prefer the migration steps to be executed in separate transactions the easiest way is to create a separate migration file for each step
  • you can use the command-line flag -u to disable usage of transactions by the migrate command

Note also that by default the migrate command stops on the 1st failed migration, but it can be executed with a flag to allow it to continue and execute all available migrations even in case of failures.

As for rolling back changes: given the nature of the eZPublish API, rolling back changes to Content is not an easy feat. As such, the bundle does not provide built-in support for rolling back the database to the version it had before applying a given migration. We recommend always taking a database snapshot before applying migrations, and use it in case you need to roll back your changes. Another approach consists in writing a separate migration to undo the changes.

Customizing the migration logic via Event Listeners

An easy way to hook up custom logic to the execution of migrations - without having to implement your own customized action executors - is to use Event Listeners.

Two events are fired for each step during execution of migrations:

* ez_migration.before_execution => listeners receive a BeforeStepExecutionEvent event instance
* ez_migration.step_executed => listeners receive a StepExecutedEvent event instance

An event is fired only in case a migration fails because a step throws a specific migration abort exception:

* ez_migration.migration_aborted => listeners receive a MigrationAbortedEvent event instance

In order to act on those events, you will need to declare tagged services, such as for ex:

my.step_executed_listener:
    class: my\helper\StepExecutedListener
    tags:
        - { name: kernel.event_listener, event: ez_migration.step_executed, method: onStepExecuted }

and the corresponding php class:

use Kaliop\eZMigrationBundle\API\Event\StepExecutedEvent;

class StepExecutedListener
{
    public function onStepExecuted(StepExecutedEvent $event)
    {
        // do something...
    }
}

Known Issues and limitations

  • unlike the Doctrine Migrations Bundle, this bundle does not support rollback of changes. Read above for the reason.

  • if you get fatal errors when running a migration stating that a node or object has not been found, it is most likely related to how the dual-kernel works in eZPublish, and the fact that the legacy and Symfony kernels use a separate connection to the database. Since the migration bundle by default wraps all database changes for a migration in a database transaction, when the Slots are fired which allow the legacy kernel to clear its caches, the legacy kernel can not see the database changes applied by the Symfony kernel, and, depending on the specific Slot in use, might fail with a fatal error. The simplest workaround is to disable usage of transactions by passing the -u flag to the migrate command.

  • if you get fatal errors without any error message when running a migration which involves a lot of content changes, such as f.e. altering a contentType with many contents, it might be that you are running out of memory for your php process. Known workarounds involve:

    • increase the maximum amount of memory allowed for the php script by running it with option '-d memory_limit=-1'
    • execute the migration command using a Symfony environment which has reduced logging and kernel debug disabled: the default configuration for the dev environment is known to leak memory
  • if you get fatal errors with he message 'You cannot create a service ("request") of an inactive scope ("request")', take a look at the following issue for a possible explanation and ideas for workarounds: https://jira.ez.no/browse/EZP-24691

  • if you are using eZPublish versions prior to 2015.9, you will not be able to create/update Role definitions that contain policies with limitations for custom modules/functions. The known workaround is to take over the RoleService and alter its constructor to inject into it the desired limitations

  • when updating a Role, you have to specify in the migration all the policies for it. Any existing policies that are not in the yml file will be removed. To make it easy to create a migration for updating a role, please use the migration:generate command using the --type=role flag

  • take care when creating content types: the eZPublish API, used internally by the migration bundle, will let you use dash characters in the content type identifiers, even if the resulting content types will then be unusable, eg.

    Example of an invalid definition:

          type: ezstring
          name: Topbar-hover-color
          identifier: topbar-hover-color
    

Frequently asked questions

How can I update a specific content which has a different Id on dev, test and prod environments?

A: use the 'reference/set' migration step to define a reference for the desired content Id, and use a Symfony parameter to store a different value for each Symfony environment. For example:

-
    type: reference
    mode: set
    identifier: content_id_ref
    value: '%a.parameter.name%'

-
    type: content
    mode: update
    match:
        content_id: "reference:content_id_ref"
    etc: ...

Extending the bundle

Supporting custom migrations

The bundle has been designed to be easily extended in many ways, such as:

  • adding support for custom/complex field-types
  • adding support for completely new actions in the Yml definitions
  • adding support for a new file format for storing migration definitions
  • adding support for a new resolver for the custom references in the migration definitions
  • taking over the way that the migrations definitions are loaded from the filesystem or stored in the database
  • etc...

Following Symfony best practices, for the first 4 options in the list above all you need to do is to create a service and give it an appropriate tag (the class implementing service should of course implement an appropriate interface).

To find out the names of the tags that you need to implement, as well as for all the other services which you can override, take a look at the services.yml file.

Running tests

The bundle uses PHPUnit to run functional tests.

Running tests in a working eZPublish installation

To run the tests:

export KERNEL_DIR=ezpublish (or 'app' for ezplatform setups)
export SYMFONY_ENV=behat (or whatever your environment is)

bin/phpunit -c vendor/kaliop/ezmigrationbundle/phpunit.xml

NB the tests do not mock interaction with the database, but create/modify/delete many types of data in it. As such, there are good chances that running tests will leave stale/broken data. It is recommended to run the tests suite using a dedicated eZPublish installation or at least dedicated database.

Setting up a dedicated test environment for the bundle

A safer choice to run the tests of the bundle is to set up a dedicated environment, as done when the test suite is run on Travis. The advantages are multiple: one one hand you can start with any version of eZPublish you want; on the other you will be more confident that the tests wll still pass on Travis. The disadvantages are that you will need to spend some time setting up the test environment, and that the environment you will use will look quite unlike a standard eZPublish setup!

Steps to set up a dedicated test environment:

(to be documented...)

License Latest Stable Version Total Downloads

Build Status Scrutinizer Code Quality Code Coverage SensioLabsInsight

About

This bundle makes it easy to handle eZ Platform content upgrades/migrations

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • PHP 99.0%
  • Other 1.0%