-
Notifications
You must be signed in to change notification settings - Fork 53k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Aspeed master v6.6 #881
base: master
Are you sure you want to change the base?
Aspeed master v6.6 #881
Conversation
[ Upstream commit 6caaf10 ] If we peek from 2 records with a currently empty rx_list, and the first record is decrypted synchronously but the second record is decrypted async, the following happens: 1. decrypt record 1 (sync) 2. copy from record 1 to the userspace's msg 3. queue the decrypted record to rx_list for future read(!PEEK) 4. decrypt record 2 (async) 5. queue record 2 to rx_list 6. call process_rx_list to copy data from the 2nd record We currently pass copied=0 as skip offset to process_rx_list, so we end up copying once again from the first record. We should skip over the data we've already copied. Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs Fixes: 692d7b5 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/1b132d2b2b99296bfde54e8a67672d90d6d16e71.1709132643.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41532b7 ] If we're not doing async, the handling is much simpler. There's no reference counting, we just need to wait for the completion to wake us up and return its result. We should preferably also use a separate crypto_wait. I'm not seeing a UAF as I did in the past, I think aec7961 ("tls: fix race between async notify and socket close") took care of it. This will make the next fix easier. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 13114dc ("tls: fix use-after-free on failed backlog decryption") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13114dc ] When the decrypt request goes to the backlog and crypto_aead_decrypt returns -EBUSY, tls_do_decryption will wait until all async decryptions have completed. If one of them fails, tls_do_decryption will return -EBADMSG and tls_decrypt_sg jumps to the error path, releasing all the pages. But the pages have been passed to the async callback, and have already been released by tls_decrypt_done. The only true async case is when crypto_aead_decrypt returns -EINPROGRESS. With -EBUSY, we already waited so we can tell tls_sw_recvmsg that the data is available for immediate copy, but we need to notify tls_decrypt_sg (via the new ->async_done flag) that the memory has already been released. Fixes: 8590541 ("net: tls: handle backlogging of crypto requests") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/4755dd8d9bebdefaa19ce1439b833d6199d4364c.1709132643.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fccfa64 ] gcc-14 notices that the allocation with sizeof(void) on 32-bit architectures is not enough for a 64-bit phys_addr_t: drivers/firmware/efi/capsule-loader.c: In function 'efi_capsule_open': drivers/firmware/efi/capsule-loader.c:295:24: error: allocation of insufficient size '4' for type 'phys_addr_t' {aka 'long long unsigned int'} with size '8' [-Werror=alloc-size] 295 | cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL); | ^ Use the correct type instead here. Fixes: f24c4d4 ("efi/capsule-loader: Reinstate virtual capsule mapping") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2df7014 ] The bq27xxx i2c-client may not have an IRQ, in which case client->irq will be 0. bq27xxx_battery_i2c_probe() already has an if (client->irq) check wrapping the request_threaded_irq(). But bq27xxx_battery_i2c_remove() unconditionally calls free_irq(client->irq) leading to: [ 190.310742] ------------[ cut here ]------------ [ 190.310843] Trying to free already-free IRQ 0 [ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310 Followed by a backtrace when unbinding the driver. Add an if (client->irq) to bq27xxx_battery_i2c_remove() mirroring probe() to fix this. Fixes: 444ff00 ("power: supply: bq27xxx: Fix I2C IRQ race on remove") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240215155133.70537-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e33625c ] The driver must write 0 to HALO_STATE before sending the SYSTEM_RESET command to the firmware. HALO_STATE is in DSP memory, which is preserved across a soft reset. The SYSTEM_RESET command does not change the value of HALO_STATE. There is period of time while the CS35L56 is resetting, before the firmware has started to boot, where a read of HALO_STATE will return the value it had before the SYSTEM_RESET. If the driver does not clear HALO_STATE, this would return BOOT_DONE status even though the firmware has not booted. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 8a731fd ("ASoC: cs35l56: Move utility functions to shared file") Link: https://msgid.link/r/20240216140535.1434933-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4df4971 ] We forgot to remove the line for snd-rtctimer from Makefile while dropping the functionality. Get rid of the stale line. Fixes: 34ce71a ("ALSA: timer: remove legacy rtctimer") Link: https://lore.kernel.org/r/20240221092156.28695-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d5a2b5 ] ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()), but there is no particular reason about that [1]. To reduce confusing, standarding these to snd_soc_xxx() is sensible. This patch adds asoc_xxx() macro to keep compatible for a while. It will be removed if all drivers were switched to new style. Link: https://lore.kernel.org/r/87h6td3hus.wl-kuninori.morimoto.gx@renesas.com [1] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87fs3ks26i.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 1382d8b ("ASoC: qcom: Fix uninitialized pointer dmactl") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b1a2df ] ASoC is now unified asoc_xxx() into snd_soc_xxx(). This patch convert asoc_xxx() to snd_soc_xxx(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v8cgqnjc.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 1382d8b ("ASoC: qcom: Fix uninitialized pointer dmactl") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1382d8b ] In the case where __lpass_get_dmactl_handle is called and the driver id dai_id is invalid the pointer dmactl is not being assigned a value, and dmactl contains a garbage value since it has not been initialized and so the null check may not work. Fix this to initialize dmactl to NULL. One could argue that modern compilers will set this to zero, but it is useful to keep this initialized as per the same way in functions __lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params. Cleans up clang scan build warning: sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch] Fixes: b81af58 ("ASoC: qcom: Add lpass CPU driver for codec dma control") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://msgid.link/r/20240221134804.3475989-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc325b1 ] The new riscv specific arch_hugetlb_migration_supported() must be guarded with a #ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION to avoid the following build error: In file included from include/linux/hugetlb.h:851, from kernel/fork.c:52: >> arch/riscv/include/asm/hugetlb.h:15:42: error: static declaration of 'arch_hugetlb_migration_supported' follows non-static declaration 15 | #define arch_hugetlb_migration_supported arch_hugetlb_migration_supported | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/hugetlb.h:916:20: note: in expansion of macro 'arch_hugetlb_migration_supported' 916 | static inline bool arch_hugetlb_migration_supported(struct hstate *h) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/riscv/include/asm/hugetlb.h:14:6: note: previous declaration of 'arch_hugetlb_migration_supported' with type 'bool(struct hstate *)' {aka '_Bool(struct hstate *)'} 14 | bool arch_hugetlb_migration_supported(struct hstate *h); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402110258.CV51JlEI-lkp@intel.com/ Fixes: ce68c03 ("riscv: Fix arch_hugetlb_migration_supported() for NAPOT") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240211083640.756583-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae861c4 ] The cs35l56->component pointer is used by the suspend-resume handling to know whether the driver is fully instantiated. This is to prevent it queuing dsp_work which would result in calling wm_adsp when the driver is not an instantiated ASoC component. So this pointer must be cleared by cs35l56_component_remove(). Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e496112 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd38ccb ] cs35l56_component_remove() must call wm_adsp_power_down() and wm_adsp2_component_remove(). Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e496112 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07687cd ] Move the call to cs35l56_set_patch() earlier in cs35l56_init() so that it only adds the register patch on first-time initialization. The call was after the post_soft_reset label, so every time this function was run to re-initialize the hardware after a reset it would call regmap_register_patch() and add the same reg_sequence again. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 898673b ("ASoC: cs35l56: Move shared data into a common data structure") Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07f7d6e ] Defer initializing the state of the ASP1 mixer registers until the firmware has been downloaded and rebooted. On a SoundWire system the ASP is free for use as a chip-to-chip interconnect. This can be either for the firmware on multiple CS35L56 to share reference audio; or as a bridge to another device. If it is a firmware interconnect it is owned by the firmware and the Linux driver should avoid writing the registers. However, if it is a bridge then Linux may take over and handle it as a normal codec-to-codec link. Even if the ASP is used as a firmware-firmware interconnect it is useful to have ALSA controls for the ASP mixer. They are at least useful for debugging. CS35L56 is designed for SDCA and a generic SDCA driver would know nothing about these chip-specific registers. So if the ASP is being used on a SoundWire system the firmware sets up the ASP mixer registers. This means that we can't assume the default state of these registers. But we don't know the initial state that the firmware set them to until after the firmware has been downloaded and booted, which can take several seconds when downloading multiple amps. DAPM normally reads the initial state of mux registers during probe() but this would mean blocking probe() for several seconds until the firmware has initialized them. To avoid this, the mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read the register state. Custom get/set callbacks are implemented for ALSA control access, and these can safely block waiting for the firmware download. After the firmware download has completed, the state of the mux registers is known so a work job is queued to call snd_soc_dapm_mux_update_power() on each of the mux widgets. Backport note: This won't apply cleanly to kernels older than v6.6. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e496112 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-11-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6c9679 ] Put the silicon revision and secured flag in the wm_adsp fwf_name string instead of including them in the part string. This changes the format of the firmware name string from cs35l56[s]-rev-misc[-system_name] to cs35l56-rev[-s]-misc[-system_name] No firmware files have been published, so this doesn't cause a compatibility break. Silicon revision and secured flag are included in the firmware filename to pick a firmware compatible with the part. These strings were being added to the part string, but that is a misuse of the string. The correct place for these is the fwf_name string, which is specifically intended to select between multiple firmware files for the same part. Backport note: This won't apply to kernels older than v6.6. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 608f1b0 ("ASoC: cs35l56: Move DSP part string generation so that it is done only once") Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c14f09f ] Rewrite the handling of ASP1 TX mixer mux initialization to prevent a deadlock during component_remove(). The firmware can overwrite the ASP1 TX mixer registers with system-specific settings. This is mainly for hardware that uses the ASP as a chip-to-chip link controlled by the firmware. Because of this the driver cannot know the starting state of the ASP1 mixer muxes until the firmware has been downloaded and rebooted. The original workaround for this was to queue a work function from the dsp_work() job. This work then read the register values (populating the regmap cache the first time around) and then called snd_soc_dapm_mux_update_power(). The problem with this is that it was ultimately triggered by cs35l56_component_probe() queueing dsp_work, which meant that it would be running in parallel with the rest of the ASoC component and card initialization. To prevent accessing DAPM before it was fully initialized the work function took the card mutex. But this would deadlock if cs35l56_component_remove() was called before the work job had completed, because ASoC calls component_remove() with the card mutex held. This new version removes the work function. Instead the regmap cache and DAPM mux widgets are initialized the first time any of the associated ALSA controls is read or written. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 07f7d6e ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") Link: https://lore.kernel.org/r/20240208123742.1278104-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eba2eb2 ] snd_soc_card_get_kcontrol() must be holding a read lock on card->controls_rwsem while walking the controls list. Compare with snd_ctl_find_numid(). The existing function is renamed snd_soc_card_get_kcontrol_locked() so that it can be called from contexts that are already holding card->controls_rwsem (for example, control get/put functions). There are few direct or indirect callers of snd_soc_card_get_kcontrol(), and most are safe. Three require changes, which have been included in this patch: codecs/cs35l45.c: cs35l45_activate_ctl() is called from a control put() function so is changed to call snd_soc_card_get_kcontrol_locked(). codecs/cs35l56.c: cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from control get()/put() functions so is changed to call snd_soc_card_get_kcontrol_locked(). fsl/fsl_xcvr.c: fsl_xcvr_activate_ctl() is called from three places, one of which already holds card->controls_rwsem: 1. fsl_xcvr_mode_put(), a control put function, which will already be holding card->controls_rwsem. 2. fsl_xcvr_startup(), a DAI startup function. 3. fsl_xcvr_shutdown(), a DAI shutdown function. To fix this, fsl_xcvr_activate_ctl() has been changed to call snd_soc_card_get_kcontrol_locked() so that it is safe to call directly from fsl_xcvr_mode_put(). The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been changed to take a read lock on card->controls_rsem() around calls to fsl_xcvr_activate_ctl(). While this is not very elegant, it keeps the change small, to avoid this patch creating a large collateral churn in fsl/fsl_xcvr.c. Analysis of other callers of snd_soc_card_get_kcontrol() is that they do not need any changes, they are not holding card->controls_rwsem when they call snd_soc_card_get_kcontrol(). Direct callers of snd_soc_card_get_kcontrol(): fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler Indirect callers via soc_component_notify_control(): codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler codecs/ak4118.c: ak4118_irq_handler() - IRQ handler codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used Indirect callers via snd_soc_limit_volume(): qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function ti/rx51.c: rx51_aic34_init() - DAI init function I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c and ak4118.c changes. Backport note: The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added since the Fixes commit so won't all be present on older kernels. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 209c6cd ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card") Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d82f322 ] Before attempting to support the pre-ratification version of vector found on older T-Head CPUs, disallow "v" in riscv,isa on these platforms. The deprecated property has no clear way to communicate the specific version of vector that is supported and much of the vendor provided software puts "v" in the isa string. riscv,isa-extensions should be used instead. This should not be too much of a burden for these systems, as the vendor shipped devicetrees and firmware do not work with a mainline kernel and will require updating. We can limit this restriction to only ignore v in riscv,isa on CPUs that report T-Head's vendor ID and a zero marchid. Newer T-Head CPUs that support the ratified version of vector should report non-zero marchid, according to Guo Ren [1]. Link: https://lore.kernel.org/linux-riscv/CAJF2gTRy5eK73=d6s7CVy9m9pB8p4rAoMHM3cZFwzg=AuF7TDA@mail.gmail.com/ [1] Fixes: dc6667a ("riscv: Extending cpufeature.c to detect V-extension") Co-developed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20240223-tidings-shabby-607f086cb4d7@spud Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86bf8cf ] Tegra DRM doesn't support display on Tegra234 and later, so make sure not to remove any existing framebuffers in that case. v2: - add comments explaining how this situation can come about - clear DRIVER_MODESET and DRIVER_ATOMIC feature bits Fixes: 6848c29 ("drm/aperture: Convert drivers to aperture interfaces") Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240223150333.1401582-1-thierry.reding@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00d6a28 ] Commit a5a9230 (fbdev: fbcon: Properly revert changes when vc_resize() failed) started restoring old font data upon failure (of vc_resize()). But it performs so only for user fonts. It means that the "system"/internal fonts are not restored at all. So in result, the very first call to fbcon_do_set_font() performs no restore at all upon failing vc_resize(). This can be reproduced by Syzkaller to crash the system on the next invocation of font_get(). It's rather hard to hit the allocation failure in vc_resize() on the first font_set(), but not impossible. Esp. if fault injection is used to aid the execution/failure. It was demonstrated by Sirius: BUG: unable to handle page fault for address: fffffffffffffff8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce torvalds#20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286 Call Trace: <TASK> con_font_get drivers/tty/vt/vt.c:4558 [inline] con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673 vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline] vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752 tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803 vfs_ioctl fs/ioctl.c:51 [inline] ... So restore the font data in any case, not only for user fonts. Note the later 'if' is now protected by 'old_userfont' and not 'old_data' as the latter is always set now. (And it is supposed to be non-NULL. Otherwise we would see the bug above again.) Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Fixes: a5a9230 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") Reported-and-tested-by: Ubisectech Sirius <bugreport@ubisectech.com> Cc: Ubisectech Sirius <bugreport@ubisectech.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240208114411.14604-1-jirislaby@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7a076 ] If a directory has a block with only ".__afsXXXX" files in it (from uncompleted silly-rename), these .__afsXXXX files are skipped but without advancing the file position in the dir_context. This leads to afs_dir_iterate() repeating the block again and again. Fix this by making the code that skips the .__afsXXXX file also manually advance the file position. The symptoms are a soft lookup: watchdog: BUG: soft lockup - CPU#3 stuck for 52s! [check:5737] ... RIP: 0010:afs_dir_iterate_block+0x39/0x1fd ... ? watchdog_timer_fn+0x1a6/0x213 ... ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? afs_dir_iterate_block+0x39/0x1fd afs_dir_iterate+0x10a/0x148 afs_readdir+0x30/0x4a iterate_dir+0x93/0xd3 __do_sys_getdents64+0x6b/0xd4 This is almost certainly the actual fix for: https://bugzilla.kernel.org/show_bug.cgi?id=218496 Fixes: 57e9d49 ("afs: Hide silly-rename files from userspace") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/786185.1708694102@warthog.procyon.org.uk Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65730fe ] Added the PERF_PMU_CAP_NO_INTERRUPT flag because the legacy pmu driver does not provide sampling capabilities Added the PERF_PMU_CAP_NO_EXCLUDE flag because the legacy pmu driver does not provide the ability to disable counter incrementation in different privilege modes Suggested-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Vadim Shakirov <vadim.shakirov@syntacore.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Fixes: 9b3e150 ("RISC-V: Add a simple platform driver for RISC-V legacy perf") Link: https://lore.kernel.org/r/20240227170002.188671-2-vadim.shakirov@syntacore.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 682dc13 ] With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n linux kernel crashes when you try perf record: $ perf record ls [ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 46.750199] Oops [#1] [ 46.750342] Modules linked in: [ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2 [ 46.750906] Hardware name: riscv-virtio,qemu (DT) [ 46.751184] epc : 0x0 [ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e [ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0 [ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0 [ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930 [ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000 [ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004 [ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2 [ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000 [ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078 [ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001 [ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff [ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30 [ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c [ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec. [ 46.754939] ---[ end trace 0000000000000000 ]--- [ 46.755131] note: perf-exec[107] exited with irqs disabled [ 46.755546] note: perf-exec[107] exited with preempt_count 4 This happens because in the legacy case the ctr_get_width function was not defined, but it is used in arch_perf_update_userpage. Also remove extra check in riscv_pmu_ctr_get_width_mask Signed-off-by: Vadim Shakirov <vadim.shakirov@syntacore.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Fixes: cc4c07c ("drivers: perf: Implement perf event mmap support in the SBI backend") Link: https://lore.kernel.org/r/20240227170002.188671-3-vadim.shakirov@syntacore.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16ab464 ] This reverts commit ce17347. We cannot correctly deal with NAPOT mappings in vmalloc/vmap because if some part of a NAPOT mapping is unmapped, the remaining mapping is not updated accordingly. For example: ptr = vmalloc_huge(64 * 1024, GFP_KERNEL); vunmap_range((unsigned long)(ptr + PAGE_SIZE), (unsigned long)(ptr + 64 * 1024)); leads to the following kernel page table dump: 0xffff8f8000ef0000-0xffff8f8000ef1000 0x00000001033c0000 4K PTE N .. .. D A G . . W R V Meaning the first entry which was not unmapped still has the N bit set, which, if accessed first and cached in the TLB, could allow access to the unmapped range. That's because the logic to break the NAPOT mapping does not exist and likely won't. Indeed, to break a NAPOT mapping, we first have to clear the whole mapping, flush the TLB and then set the new mapping ("break- before-make" equivalent). That works fine in userspace since we can handle any pagefault occurring on the remaining mapping but we can't handle a kernel pagefault on such mapping. So fix this by reverting the commit that introduced the vmap/vmalloc support. Fixes: ce17347 ("riscv: mm: support Svnapot in huge vmap") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240227205016.121901-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0fe5ab ] pte_leaf_size() must be reimplemented to add support for NAPOT mappings. Fixes: 82a1a1f ("riscv: mm: support Svnapot in hugetlb page") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240227205016.121901-3-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a11dd49 ] Offset vmemmap so that the first page of vmemmap will be mapped to the first page of physical memory in order to ensure that vmemmap’s bounds will be respected during pfn_to_page()/page_to_pfn() operations. The conversion macros will produce correct SV39/48/57 addresses for every possible/valid DRAM_BASE inside the physical memory limits. v2:Address Alex's comments Suggested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Dimitris Vlachos <dvlachos@ics.forth.gr> Reported-by: Dimitris Vlachos <dvlachos@ics.forth.gr> Closes: https://lore.kernel.org/linux-riscv/20240202135030.42265-1-csd4492@csd.uoc.gr Fixes: d95f1a5 ("RISC-V: Implement sparsemem") Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240229191723.32779-1-dvlachos@ics.forth.gr Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1a4a9c ] For fiemap we recently stopped locking the target extent range for the whole duration of the fiemap call, in order to avoid a deadlock in a scenario where the fiemap buffer happens to be a memory mapped range of the same file. This use case is very unlikely to be useful in practice but it may be triggered by fuzz testing (syzbot, etc). However by not locking the target extent range for the whole duration of the fiemap call we can race with an ordered extent. This happens like this: 1) The fiemap task finishes processing a file extent item that covers the file range [512K, 1M[, and that file extent item is the last item in the leaf currently being processed; 2) And ordered extent for the file range [768K, 2M[, in COW mode, completes (btrfs_finish_one_ordered()) and the file extent item covering the range [512K, 1M[ is trimmed to cover the range [512K, 768K[ and then a new file extent item for the range [768K, 2M[ is inserted in the inode's subvolume tree; 3) The fiemap task calls fiemap_next_leaf_item(), which then calls btrfs_next_leaf() to find the next leaf / item. This finds that the the next key following the one we previously processed (its type is BTRFS_EXTENT_DATA_KEY and its offset is 512K), is the key corresponding to the new file extent item inserted by the ordered extent, which has a type of BTRFS_EXTENT_DATA_KEY and an offset of 768K; 4) Later the fiemap code ends up at emit_fiemap_extent() and triggers the warning: if (cache->offset + cache->len > offset) { WARN_ON(1); return -EINVAL; } Since we get 1M > 768K, because the previously emitted entry for the old extent covering the file range [512K, 1M[ ends at an offset that is greater than the new extent's start offset (768K). This makes fiemap fail with -EINVAL besides triggering the warning that produces a stack trace like the following: [1621.677651] ------------[ cut here ]------------ [1621.677656] WARNING: CPU: 1 PID: 204366 at fs/btrfs/extent_io.c:2492 emit_fiemap_extent+0x84/0x90 [btrfs] [1621.677899] Modules linked in: btrfs blake2b_generic (...) [1621.677951] CPU: 1 PID: 204366 Comm: pool Not tainted 6.8.0-rc5-btrfs-next-151+ #1 [1621.677954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [1621.677956] RIP: 0010:emit_fiemap_extent+0x84/0x90 [btrfs] [1621.678033] Code: 2b 4c 89 63 (...) [1621.678035] RSP: 0018:ffffab16089ffd20 EFLAGS: 00010206 [1621.678037] RAX: 00000000004fa000 RBX: ffffab16089ffe08 RCX: 0000000000009000 [1621.678039] RDX: 00000000004f9000 RSI: 00000000004f1000 RDI: ffffab16089ffe90 [1621.678040] RBP: 00000000004f9000 R08: 0000000000001000 R09: 0000000000000000 [1621.678041] R10: 0000000000000000 R11: 0000000000001000 R12: 0000000041d78000 [1621.678043] R13: 0000000000001000 R14: 0000000000000000 R15: ffff9434f0b17850 [1621.678044] FS: 00007fa6e20006c0(0000) GS:ffff943bdfa40000(0000) knlGS:0000000000000000 [1621.678046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1621.678048] CR2: 00007fa6b0801000 CR3: 000000012d404002 CR4: 0000000000370ef0 [1621.678053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1621.678055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1621.678056] Call Trace: [1621.678074] <TASK> [1621.678076] ? __warn+0x80/0x130 [1621.678082] ? emit_fiemap_extent+0x84/0x90 [btrfs] [1621.678159] ? report_bug+0x1f4/0x200 [1621.678164] ? handle_bug+0x42/0x70 [1621.678167] ? exc_invalid_op+0x14/0x70 [1621.678170] ? asm_exc_invalid_op+0x16/0x20 [1621.678178] ? emit_fiemap_extent+0x84/0x90 [btrfs] [1621.678253] extent_fiemap+0x766/0xa30 [btrfs] [1621.678339] btrfs_fiemap+0x45/0x80 [btrfs] [1621.678420] do_vfs_ioctl+0x1e4/0x870 [1621.678431] __x64_sys_ioctl+0x6a/0xc0 [1621.678434] do_syscall_64+0x52/0x120 [1621.678445] entry_SYSCALL_64_after_hwframe+0x6e/0x76 There's also another case where before calling btrfs_next_leaf() we are processing a hole or a prealloc extent and we had several delalloc ranges within that hole or prealloc extent. In that case if the ordered extents complete before we find the next key, we may end up finding an extent item with an offset smaller than (or equals to) the offset in cache->offset. So fix this by changing emit_fiemap_extent() to address these three scenarios like this: 1) For the first case, steps listed above, adjust the length of the previously cached extent so that it does not overlap with the current extent, emit the previous one and cache the current file extent item; 2) For the second case where he had a hole or prealloc extent with multiple delalloc ranges inside the hole or prealloc extent's range, and the current file extent item has an offset that matches the offset in the fiemap cache, just discard what we have in the fiemap cache and assign the current file extent item to the cache, since it's more up to date; 3) For the third case where he had a hole or prealloc extent with multiple delalloc ranges inside the hole or prealloc extent's range and the offset of the file extent item we just found is smaller than what we have in the cache, just skip the current file extent item if its range end at or behind the cached extent's end, because we may have emitted (to the fiemap user space buffer) delalloc ranges that overlap with the current file extent item's range. If the file extent item's range goes beyond the end offset of the cached extent, just emit the cached extent and cache a subrange of the file extent item, that goes from the end offset of the cached extent to the end offset of the file extent item. Dealing with those cases in those ways makes everything consistent by reflecting the current state of file extent items in the btree and without emitting extents that have overlapping ranges (which would be confusing and violating expectations). This issue could be triggered often with test case generic/561, and was also hit and reported by Wang Yugui. Reported-by: Wang Yugui <wangyugui@e16-tech.com> Link: https://lore.kernel.org/linux-btrfs/20240223104619.701F.409509F4@e16-tech.com/ Fixes: b0ad381 ("btrfs: fix deadlock with fiemap and extent locking") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cb50f6 ] Introduced a stupid bug in commit 782bfd0 ("of: property: Improve finding the supplier of a remote-endpoint property") due to a last minute incorrect edit of "index !=0" into "!index". This patch fixes it to be "index > 0" to match the comment right next to it. Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/lkml/20240223171849.10f9901d@booty/ Fixes: 782bfd0 ("of: property: Improve finding the supplier of a remote-endpoint property") Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20240224052436.3552333-1-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2f03fc3 upstream. Since tomoyo_write_control() updates head->write_buf when write() of long lines is requested, we need to fetch head->write_buf after head->io_sem is held. Otherwise, concurrent write() requests can cause use-after-free-write and double-free problems. Reported-by: Sam Sun <samsun1006219@gmail.com> Closes: https://lkml.kernel.org/r/CAEkJfYNDspuGxYx5kym8Lvp--D36CMDUErg4rxfWFJuPbbji8g@mail.gmail.com Fixes: bd03a3e ("TOMOYO: Add policy namespace support.") Cc: <stable@vger.kernel.org> # Linux 3.1+ Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge IBI error handling codes from aspeed-dev-v5.15. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Change-Id: Ia44b9ea0dd2fe8bf834ed17be0afcdc2afedc1fc
Support s35hl256t flash part. Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Change-Id: I5ced4be50a8b8dfc41e899096e493bf232bcb414
Change-Id: Iba0543cf116039b899eba28681e2d28d235821fb Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
I3C controllers on LTPI0: ltpi0_i3cX -> i3c10X I3C controllers on LTPI1: ltpi1_i3cX -> i3c20x Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Change-Id: Ia814f1d2afdebe5b1ed4b3ca4434d9c9df1b9331
Due to the following boot warnning, enable BPF/cgroup firewalling. [8.320707] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [8.335463] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [8.349877] systemd[1]: systemd-journald.service: (This warning is only shown for the first unit using IP firewalling.) [8.393876] systemd[1]: Starting Journal Service... Starting Journal Service... Enable CONFIG_CGROUP_BPF in make menuconfig. And make savedefconfig to replace aspeed_g7_defconfig. Change-Id: Id13521cb5ddfab9d07946d3c1efee25fb2f6e12b Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
Add board level dts for ast2700-dcscm plus ast1700-demo board. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Change-Id: Ic9490d83fa08d6330767140d39210571aaaf5e3b
Enable I3CDEV for debugging on target devices without driver binding. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Change-Id: Icaab9d1357a61f98ac8df0b8fe8ef9bf717cfe26
Unify all debug message controls under the same macro DBG in hci.h. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: I607335e5c450b5029f76b57b465f004d75f9df6d
Use AST1700 I2C devices instead of AST2700 I2C devices tunneling through LTPI, as AST1700 I2C devices support both controller mode and target mode for flexibility. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Change-Id: Ic796c6a01c0b769e6e9083efe719bb49ef303019
This driver will export 2 files, dac_src/dp_src, in /sys/class to control the source of these 2 display interfaces. 2600/2700 only Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Change-Id: Ifb2a4590f3b4224fb22f6ca57b6310fc7b8cfe92
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Change-Id: I6d8f31c19b62e6b9879203a7ce59fb48adf1d2aa
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Change-Id: I7353fdb1567257f8d2e06aae46174ec7ab0b7f92
Disable SPI0 CS0 and SPI1 CS1 device nodes which doesn't exist on AST2700 dc-scm board. Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Change-Id: If421cabf595d710a3f59c321065b46c393b1abdb
The interrupt controller node needs the #interrupt-cells property to inform the consumer about how to specify its parameters. This patch adds it to complete the interrupt property for sgpiom as an interrupt controller Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: I702948771de1d41aa96861a09c59871e1921f634
The interrupt controller node needs the #interrupt-cells property to inform the consumer about how to specify its parameters. This patch adds it to complete the interrupt property for sgpio as an interrupt controller Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: I084b2c33791d591862ef6b2548f765ea3cf850c3
Aspeed's u-boot sdk has been updated with the SoC IDs for the AST2750/AST2700/AST2720 variant, as well as A0 variants of the 2700 family. >From u-boot's arch/arm/mach-aspeed/ast2700/cpu-info.c: SOC_ID("AST2750-A0", 0x0600000306000003), SOC_ID("AST2700-A0", 0x0600010306000103), SOC_ID("AST2720-A0", 0x0600020306000203), Change-Id: I40a33742aff40307b963595f61636317e5ae513e Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
Set protocol1_ext signals as default PHY3 settings based on SNPS documents. This includes previous PCFGI[54]: protocol1_ext_rx_los_lfps_en as 1 for better SS/SSP devices compatibility Signed-off-by: Joe Wang <joe_wang@aspeedtech.com> Change-Id: I3a67d04816d6b30f5d7840da66b592480f9603e8
1. Add SGPIOS line 18 FP_PWR_BTN_PFR_N_BMC_IN for x86-power-control power button input. 2. Update L75 slave address. 3. Fix typo. Signed-off-by: VinceChang6637 <vince_chang@aspeedtech.com> Change-Id: Ieff8661628ce55f180880525881a16319023911c
This reverts commit d14c77e. After enable CONFIG_CGROUP_BPF, need to check the following log. [ 45.132333] audit: type=1334 audit(1711018135.936:15): prog-id=13 op=UNLOAD [ 45.140128] audit: type=1334 audit(1711018135.936:16): prog-id=12 op=UNLOAD [ 46.488530] audit: type=1334 audit(1711018137.300:17): prog-id=17 op=UNLOAD [ 46.496356] audit: type=1334 audit(1711018137.300:18): prog-id=16 op=UNLOAD [ 46.504143] audit: type=1334 audit(1711018137.300:19): prog-id=15 op=UNLOAD [ 47.069839] audit: type=1334 audit(1711103402.725:20): prog-id=18 op=LOAD [ 47.276496] audit: type=1334 audit(1711103402.933:21): prog-id=18 op=UNLOAD Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com> Change-Id: Ic6c703702bea0768b46f62731220d5cf31f05019
Add the condition to separate the ibi and response ready interrupt. Before this patch the master will signal the completion of the thread, either ibi or response ready interrupt. However, the completion should only wait for response ready interrupts instead of the ibi. The unexpected wake-up by ibi will result in the process stuck or kernel panic Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: I4861b01419831feb95f1d1a24908b330191326d7
Transfer error interrupt will generate one response data, so append this condition to handle the response data for the xfer error. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: I046c1c5457fded8c1c795d3b7d53d7421b040f7e
Add the PECI dts node to dtsi. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: I059cfa2c1581ed25062fb7c593fd628cc7a74fcd
Enable the PECI device on the EVB by default. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: Iedff2746c11043683ce1c0350ab5007deaab7424
Apply the new naming rule for all the ast2700-based boards: ``` <soc>-<type>-<feature0>-<feature1>_<soc>-<type>-<feature0>-.. ``` This helps to distinguish the combo boards (e.g., AST2700-EVB connected to AST1700-EVB through LTPI) from each other. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Change-Id: I12bc5897a50acce9ae0b169696aae8b5a22d3b77
Enable the PECI device on AST2700-DCSCM. Signed-off-by: VinceChang6637 <vince_chang@aspeedtech.com> Change-Id: I3a916c55d9c7f633fbc8f1c503bd5abed066f152
Add a new combo board: ast2700-dcscm connected with ast1700-evb Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Change-Id: I27b087c3d8092cb29173edc1b038c347cc041e8f
Include ast2700-dcscm.dts and add/modify the device nodes on AST1700-DEMO board. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Change-Id: I67c2401b54687dc91df54524b18dd798d3d04267
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Change-Id: Icadf8c6d64388d2becb90e4f8c88433ccf6bcdbc
The reset ID for MAC1 and MAC2 is 11 and 12 respectively, which are relative to SCU040 bits 11 and 12 Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Change-Id: If9cc82e0109fce1b1bcad493497b02d8f9eccf43
Hi @PennixRv! Thanks for your contribution to the Linux kernel! Linux kernel development happens on mailing lists, rather than on GitHub - this GitHub repository is a read-only mirror that isn't used for accepting contributions. So that your change can become part of Linux, please email it to us as a patch. Sending patches isn't quite as simple as sending a pull request, but fortunately it is a well documented process. Here's what to do:
How do I format my contribution?The Linux kernel community is notoriously picky about how contributions are formatted and sent. Fortunately, they have documented their expectations. Firstly, all contributions need to be formatted as patches. A patch is a plain text document showing the change you want to make to the code, and documenting why it is a good idea. You can create patches with Secondly, patches need 'commit messages', which is the human-friendly documentation explaining what the change is and why it's necessary. Thirdly, changes have some technical requirements. There is a Linux kernel coding style, and there are licensing requirements you need to comply with. Both of these are documented in the Submitting Patches documentation that is part of the kernel. Note that you will almost certainly have to modify your existing git commits to satisfy these requirements. Don't worry: there are many guides on the internet for doing this. Where do I send my contribution?The Linux kernel is composed of a number of subsystems. These subsystems are maintained by different people, and have different mailing lists where they discuss proposed changes. If you don't already know what subsystem your change belongs to, the
Make sure that your list of recipients includes a mailing list. If you can't find a more specific mailing list, then LKML - the Linux Kernel Mailing List - is the place to send your patches. It's not usually necessary to subscribe to the mailing list before you send the patches, but if you're interested in kernel development, subscribing to a subsystem mailing list is a good idea. (At this point, you probably don't need to subscribe to LKML - it is a very high traffic list with about a thousand messages per day, which is often not useful for beginners.) How do I send my contribution?Use For more information about using How do I get help if I'm stuck?Firstly, don't get discouraged! There are an enormous number of resources on the internet, and many kernel developers who would like to see you succeed. Many issues - especially about how to use certain tools - can be resolved by using your favourite internet search engine. If you can't find an answer, there are a few places you can turn:
If you get really, really stuck, you could try the owners of this bot, @daxtens and @ajdlinux. Please be aware that we do have full-time jobs, so we are almost certainly the slowest way to get answers! I sent my patch - now what?You wait. You can check that your email has been received by checking the mailing list archives for the mailing list you sent your patch to. Messages may not be received instantly, so be patient. Kernel developers are generally very busy people, so it may take a few weeks before your patch is looked at. Then, you keep waiting. Three things may happen:
Further information
Happy hacking! This message was posted by a bot - if you have any questions or suggestions, please talk to my owners, @ajdlinux and @daxtens, or raise an issue at https://github.com/ajdlinux/KernelPRBot. |
No description provided.