[bgp]: Implement Universal Traffic Shift for SONiC

dockers/docker-fpm-frr/Dockerfile.j2

@@ -47,5 +47,11 @@ COPY ["bgpcfgd", "start.sh", "/usr/bin/"]
 COPY ["*.j2", "/usr/share/sonic/templates/"]
 COPY ["supervisord.conf", "/etc/supervisor/conf.d/"]
 COPY ["snmp.conf", "/etc/snmp/frr.conf"]
+COPY ["TSA", "/usr/bin/TSA"]
+COPY ["TSB", "/usr/bin/TSB"]
+COPY ["TSC", "/usr/bin/TSC"]
+RUN chmod a+x /usr/bin/TSA && \
+    chmod a+x /usr/bin/TSB && \
+    chmod a+x /usr/bin/TSC
 
 ENTRYPOINT ["/usr/bin/supervisord"]

dockers/docker-fpm-frr/TSA

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+c=0
+config=$(vtysh -c "show run")
+echo "$config" | grep -q "route-map TO_BGP_PEER_V4 permit 2"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V4 deny 3"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V6 permit 2"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V6 deny 3"
+c=$(($c+$?))
+
+if [[ $c -eq 4 ]];
+then
+  vtysh -c "configure terminal" -c "route-map TO_BGP_PEER_V4 permit 2" -c "match ip address prefix-list PL_LoopbackV4"
+  vtysh -c "configure terminal" -c "route-map TO_BGP_PEER_V4 deny 3"
+  vtysh -c "configure terminal" -c "route-map TO_BGP_PEER_V6 permit 2" -c "match ipv6 address prefix-list PL_LoopbackV6"
+  vtysh -c "configure terminal" -c "route-map TO_BGP_PEER_V6 deny 3"
+  echo "System Mode: Normal -> Maintenance"
+else
+  echo "System is already in Maintenance mode"
+fi

dockers/docker-fpm-frr/TSB

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+c=0
+config=$(vtysh -c "show run")
+echo "$config" | grep -q "route-map TO_BGP_PEER_V4 permit 2"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V4 deny 3"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V6 permit 2"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V6 deny 3"
+c=$(($c+$?))
+
+if [[ $c -eq 0 ]];
+then
+  vtysh -c "configure terminal" -c "no route-map TO_BGP_PEER_V4 deny 3"
+  vtysh -c "configure terminal" -c "no route-map TO_BGP_PEER_V4 permit 2"
+  vtysh -c "configure terminal" -c "no route-map TO_BGP_PEER_V6 deny 3"
+  vtysh -c "configure terminal" -c "no route-map TO_BGP_PEER_V6 permit 2"
+
+  echo "System Mode: Maintenance -> Normal"
+else
+  echo "System is already in Normal mode"
+fi

dockers/docker-fpm-frr/TSC

@@ -0,0 +1,25 @@
+#!/bin/bash
+
+echo "Traffic Shift Check:"
+c=0
+config=$(vtysh -c "show run")
+echo "$config" | grep -q "route-map TO_BGP_PEER_V4 permit 2"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V4 deny 3"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V6 permit 2"
+c=$(($c+$?))
+echo "$config" | grep -q "route-map TO_BGP_PEER_V6 deny 3"
+c=$(($c+$?))
+
+if [[ $c -eq 4 ]];
+then
+  echo "System Mode: Normal"
+elif [[ $c -eq 0 ]];
+then
+  echo "System Mode: Maintenance"
+else
+  echo "System Mode: Not consistent"
+fi
+
+echo

dockers/docker-fpm-frr/base_image_files/TSA

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+docker exec -i bgp /usr/bin/TSA

dockers/docker-fpm-frr/base_image_files/TSB

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+docker exec -i bgp /usr/bin/TSB

dockers/docker-fpm-frr/base_image_files/TSC

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+docker exec -i bgp /usr/bin/TSC
+
+/usr/bin/portstat -p 5

dockers/docker-fpm-frr/bgpd.conf.default.j2

@@ -7,6 +7,21 @@ route-map FROM_BGP_SPEAKER_V4 permit 10
 !
 route-map TO_BGP_SPEAKER_V4 deny 10
 !
+{# generate loopback prefix-lists #}
+{% for (name, prefix) in LOOPBACK_INTERFACE|pfx_filter %}
+{% if prefix | ipv4 and name == 'Loopback0' %}
+ip prefix-list PL_LoopbackV4 permit {{ prefix | ip }}/32
+{% elif prefix | ipv6 and name == 'Loopback0' %}
+ipv6 prefix-list PL_LoopbackV6 permit {{ prefix | ip }}/64
+{% endif %}
+{% endfor %}
+!
+{# generate default peer route-maps #}
+!
+route-map TO_BGP_PEER_V4 permit 100
+!
+route-map TO_BGP_PEER_V6 permit 100
+!
 router bgp {{ DEVICE_METADATA['localhost']['bgp_asn'] }}
   bgp log-neighbor-changes
   bgp bestpath as-path multipath-relax
@@ -57,6 +72,10 @@ router bgp {{ DEVICE_METADATA['localhost']['bgp_asn'] }}
 {% if bgp_session.has_key('admin_status') and bgp_session['admin_status'] == 'down' or not bgp_session.has_key('admin_status') and DEVICE_METADATA['localhost'].has_key('default_bgp_status') and DEVICE_METADATA['localhost']['default_bgp_status'] == 'down' %}
   neighbor {{ neighbor_addr }} shutdown
 {% endif %}
+{# Apply default route-map for v4 peers #}
+{% if neighbor_addr | ipv4 %}
+  neighbor {{ neighbor_addr }} route-map TO_BGP_PEER_V4 out
+{% endif %}
 {% if neighbor_addr | ipv4 %}
   address-family ipv4
 {% if DEVICE_METADATA['localhost']['type'] == 'ToRRouter' %}
@@ -89,6 +108,8 @@ router bgp {{ DEVICE_METADATA['localhost']['bgp_asn'] }}
 {% if bgp_session['asn'] != DEVICE_METADATA['localhost']['bgp_asn'] %}
     neighbor {{ neighbor_addr }} route-map set-next-hop-global-v6 in
 {% endif %}
+{# Apply default route-map for v6 peers #}
+    neighbor {{ neighbor_addr }} route-map TO_BGP_PEER_V6 out
     maximum-paths 64
   exit-address-family
 {% endif %}

rules/docker-fpm-frr.mk

@@ -27,4 +27,6 @@ $(DOCKER_FPM_FRR)_RUN_OPT += -v /etc/sonic:/etc/sonic:ro
 $(DOCKER_FPM_FRR)_RUN_OPT += -v /etc/sonic/frr:/etc/frr:rw
 
 $(DOCKER_FPM_FRR)_BASE_IMAGE_FILES += vtysh:/usr/bin/vtysh
-
+$(DOCKER_FPM_FRR)_BASE_IMAGE_FILES += TSA:/usr/bin/TSA
+$(DOCKER_FPM_FRR)_BASE_IMAGE_FILES += TSB:/usr/bin/TSB
+$(DOCKER_FPM_FRR)_BASE_IMAGE_FILES += TSC:/usr/bin/TSC

src/sonic-config-engine/tests/sample_output/bgpd_frr.conf

@@ -0,0 +1,125 @@
+!
+! =========== Managed by sonic-cfggen DO NOT edit manually! ====================
+! generated by templates/quagga/bgpd.conf.j2 with config DB data
+! file: bgpd.conf
+!
+!
+hostname switch-t0
+password zebra
+log syslog informational
+log facility local4
+agentx
+! enable password !
+!
+! bgp multiple-instance
+!
+route-map FROM_BGP_SPEAKER_V4 permit 10
+!
+route-map TO_BGP_SPEAKER_V4 deny 10
+!
+ip prefix-list PL_LoopbackV4 permit 10.1.0.32/32
+ipv6 prefix-list PL_LoopbackV6 permit fc00:1::32/64
+!
+!
+route-map TO_BGP_PEER_V4 permit 100
+!
+route-map TO_BGP_PEER_V6 permit 100
+!
+router bgp 65100
+  bgp log-neighbor-changes
+  bgp bestpath as-path multipath-relax
+  no bgp default ipv4-unicast
+  bgp graceful-restart restart-time 240
+  bgp graceful-restart
+  bgp graceful-restart preserve-fw-state
+  bgp router-id 10.1.0.32
+  network 10.1.0.32/32
+  address-family ipv6
+    network fc00:1::32/64
+  exit-address-family
+  network 192.168.0.1/27
+  neighbor 10.0.0.57 remote-as 64600
+  neighbor 10.0.0.57 description ARISTA01T1
+  neighbor 10.0.0.57 route-map TO_BGP_PEER_V4 out
+  address-family ipv4
+    neighbor 10.0.0.57 allowas-in 1
+    neighbor 10.0.0.57 activate
+    neighbor 10.0.0.57 soft-reconfiguration inbound
+    maximum-paths 64
+  exit-address-family
+  neighbor 10.0.0.59 remote-as 64600
+  neighbor 10.0.0.59 description ARISTA02T1
+  neighbor 10.0.0.59 route-map TO_BGP_PEER_V4 out
+  address-family ipv4
+    neighbor 10.0.0.59 allowas-in 1
+    neighbor 10.0.0.59 activate
+    neighbor 10.0.0.59 soft-reconfiguration inbound
+    maximum-paths 64
+  exit-address-family
+  neighbor 10.0.0.61 remote-as 64600
+  neighbor 10.0.0.61 description ARISTA03T1
+  neighbor 10.0.0.61 route-map TO_BGP_PEER_V4 out
+  address-family ipv4
+    neighbor 10.0.0.61 allowas-in 1
+    neighbor 10.0.0.61 activate
+    neighbor 10.0.0.61 soft-reconfiguration inbound
+    maximum-paths 64
+  exit-address-family
+  neighbor 10.0.0.63 remote-as 64600
+  neighbor 10.0.0.63 description ARISTA04T1
+  neighbor 10.0.0.63 route-map TO_BGP_PEER_V4 out
+  address-family ipv4
+    neighbor 10.0.0.63 allowas-in 1
+    neighbor 10.0.0.63 activate
+    neighbor 10.0.0.63 soft-reconfiguration inbound
+    maximum-paths 64
+  exit-address-family
+  neighbor fc00::7a remote-as 64600
+  neighbor fc00::7a description ARISTA03T1
+  address-family ipv6
+    neighbor fc00::7a allowas-in 1
+    neighbor fc00::7a activate
+    neighbor fc00::7a soft-reconfiguration inbound
+    neighbor fc00::7a route-map set-next-hop-global-v6 in
+    neighbor fc00::7a route-map TO_BGP_PEER_V6 out
+    maximum-paths 64
+  exit-address-family
+  neighbor fc00::7e remote-as 64600
+  neighbor fc00::7e description ARISTA04T1
+  address-family ipv6
+    neighbor fc00::7e allowas-in 1
+    neighbor fc00::7e activate
+    neighbor fc00::7e soft-reconfiguration inbound
+    neighbor fc00::7e route-map set-next-hop-global-v6 in
+    neighbor fc00::7e route-map TO_BGP_PEER_V6 out
+    maximum-paths 64
+  exit-address-family
+  neighbor fc00::72 remote-as 64600
+  neighbor fc00::72 description ARISTA01T1
+  address-family ipv6
+    neighbor fc00::72 allowas-in 1
+    neighbor fc00::72 activate
+    neighbor fc00::72 soft-reconfiguration inbound
+    neighbor fc00::72 route-map set-next-hop-global-v6 in
+    neighbor fc00::72 route-map TO_BGP_PEER_V6 out
+    maximum-paths 64
+  exit-address-family
+  neighbor fc00::76 remote-as 64600
+  neighbor fc00::76 description ARISTA02T1
+  address-family ipv6
+    neighbor fc00::76 allowas-in 1
+    neighbor fc00::76 activate
+    neighbor fc00::76 soft-reconfiguration inbound
+    neighbor fc00::76 route-map set-next-hop-global-v6 in
+    neighbor fc00::76 route-map TO_BGP_PEER_V6 out
+    maximum-paths 64
+  exit-address-family
+!!
+maximum-paths 64
+!
+route-map ISOLATE permit 10
+set as-path prepend 65100
+!
+route-map set-next-hop-global-v6 permit 10
+set ipv6 next-hop prefer-global
+!

src/sonic-config-engine/tests/sample_output/zebra_frr.conf

@@ -0,0 +1,44 @@
+!
+! =========== Managed by sonic-cfggen DO NOT edit manually! ====================
+! generated by templates/quagga/zebra.conf.j2 using config DB data
+! file: zebra.conf
+!
+!
+hostname switch-t0
+password zebra
+enable password zebra
+!
+! Enable link-detect (default disabled)
+interface PortChannel01
+link-detect
+!
+interface PortChannel02
+link-detect
+!
+interface PortChannel03
+link-detect
+!
+interface PortChannel04
+link-detect
+!
+!
+! set static default route to mgmt gateway as a backup to learned default
+ip route 0.0.0.0/0 10.0.0.1 200
+!
+! Set ip source to loopback for bgp learned routes
+route-map RM_SET_SRC permit 10
+    set src 10.1.0.32
+!
+
+route-map RM_SET_SRC6 permit 10
+    set src fc00:1::32
+!
+ip protocol bgp route-map RM_SET_SRC
+!
+ipv6 protocol bgp route-map RM_SET_SRC6
+!
+!
+log syslog informational
+log facility local4
+!
+

src/sonic-config-engine/tests/test_j2files.py

@@ -78,6 +78,23 @@ def test_config_frr(self):
         self.run_script(argument)
         self.assertTrue(filecmp.cmp(os.path.join(self.test_dir, 'sample_output', 'frr.conf'), self.output_file))
 
+
+    def test_bgpd_frr(self):
+        conf_template = os.path.join(self.test_dir, '..', '..', '..', 'dockers', 'docker-fpm-frr', 'bgpd.conf.j2')
+        argument = '-m ' + self.t0_minigraph + ' -p ' + self.t0_port_config + ' -t ' + conf_template + ' > ' + self.output_file
+        self.run_script(argument)
+        original_filename = os.path.join(self.test_dir, 'sample_output', 'bgpd_frr.conf')
+        r = filecmp.cmp(original_filename, self.output_file)
+        diff_output = self.run_diff(original_filename, self.output_file) if not r else ""
+        self.assertTrue(r, "Diff:\n" + diff_output)
+
+    def test_zebra_frr(self):
+        conf_template = os.path.join(self.test_dir, '..', '..', '..', 'dockers', 'docker-fpm-quagga', 'zebra.conf.j2')
+        argument = '-m ' + self.t0_minigraph + ' -p ' + self.t0_port_config + ' -t ' + conf_template + ' > ' + self.output_file
+        self.run_script(argument)
+        self.assertTrue(filecmp.cmp(os.path.join(self.test_dir, 'sample_output', 'zebra_frr.conf'), self.output_file))
+
+
     def test_ipinip(self):
         ipinip_file = os.path.join(self.test_dir, '..', '..', '..', 'dockers', 'docker-orchagent', 'ipinip.json.j2')
         argument = '-m ' + self.t0_minigraph + ' -p ' + self.t0_port_config + ' -t ' + ipinip_file + ' > ' + self.output_file