No "Do not perform lifting sequence for layers with same Z positioning" when generating calibration file for Anycubic M3 Premium #706
-
System
Printer and Slicer
Description of the bugExpecting to be able to select "Do not perform lifting sequence for layers with same Z positioning" in the Multiple Exposures section, but it's not there - not even there but greyed out, just completely missing How to reproduceTry to create a calibration file for an Anycubic M3 Premium FilesNo response |
Beta Was this translation helpful? Give feedback.
Replies: 5 comments
-
It's there for me, try to scroll the section down. |
Beta Was this translation helpful? Give feedback.
-
Nope. Not there |
Beta Was this translation helpful? Give feedback.
-
Ah yes, sorry I was looking for other option. |
Beta Was this translation helpful? Give feedback.
-
That's a great pity, because non-gcode printers had no issues with the "Do not perform lifting sequence for layers with same Z positioning" option - I generated multiple exposure tests for my Phrozen Mighty 4Ks just a few weeks ago on an older version. Looks like I need to downgrade my installation back to what I was using |
Beta Was this translation helpful? Give feedback.
-
Phrozen uses a different firmware that it might work. But I guess it still does some minimal lift?
No... Read my reply again...
In other words, "Do not perform lifting sequence for layers with same Z positioning" = Lift Height of 0mm |
Beta Was this translation helpful? Give feedback.
Ah yes, sorry I was looking for other option.
That option is gone long time ago. To get same result set 0mm on 'Lift Height' option below. But that won't work for most formats, and that's why default is 0.10mm. So far only gcode printers can benefit from that. All other formats doesn't like the zero value