- sdr-enthusiasts/docker-dump978
This container provides the FlightAware 978MHz UAT decoder dump978-fa and wiedehopf's implementation of uat2esnt
code within readsb
. (Thanks mutability for dump978-fa and the code used within readsb)
This container can be used alongside sdr-enthusiasts/docker-readsb-protobuf to provide UAT into several feeders.
This container also contains InfluxData's Telegraf, and can send flight data and dump978
metrics to InfluxDB (if wanted - not started by default).
UAT is currently only used in the USA, so don't bother with this if you're not located in the USA.
NOTE: As of November 2, 2023, Telegraf support is only available in the container labeled ghcr.io/sdr-enthusiasts/docker-dump978:telegraf
. It is no longer available in ghcr.io/sdr-enthusiasts/docker-dump978:latest
. If you want to use Telegraf to send data to InfluxDB or Prometheus, please switch to the :telegraf
label.
The container listens on the following TCP ports:
Port | Description |
---|---|
30978 |
Raw UAT output (compatible with wiedehopf readsb's uat_in , but NOT compatible with readsb 's raw_in !) |
30979 |
Decoded JSON output |
37981 |
uat2esnt/readsb converted raw output. This IS compatible with readsb 's raw_in . (DEPRECATED, use uat_in on port 30978 or beast_in on port 37982!) |
37982 |
uat2esnt/readsb converted beast output. This IS compatible with readsb 's beast_in . |
80 |
Webserver for SkyAware978 and HTTP HealthCheck |
Path (inside container) | Details |
---|---|
/var/globe_history |
Map this to persistant storage if you set DUMP978_SDR_GAIN=autogain |
docker run \
-d \
--restart=always \
-it \
--name dump978 \
-p 30978:30978 \
-p 30979:30979 \
-p 30980:80 \
-p 37981:37981 \
-p 37982:37982 \
--device /dev/bus/usb:/dev/bus/usb \
-e DUMP978_RTLSDR_DEVICE=00000978 \
ghcr.io/sdr-enthusiasts/docker-dump978:latest
You can now:
- Add a net-connector to your readsb container, to pull data from port 37982 as
beast_in
, eg:<DOCKERHOST>,37982,beast_in
- Add the following environment variables to your piaware container:
- UAT_RECEIVER_TYPE=relay
- UAT_RECEIVER_HOST=<DOCKERHOST>
You should now be feeding UAT to most aggregators.
Here is an example docker-compose.yml
:
<‐‐ Click the arrow to see the docker-compose.yml
text
dump978:
# dump978 gets UAT data from the SDR
image: ghcr.io/sdr-enthusiasts/docker-dump978:latest
# profiles:
# - donotstart
tty: true
container_name: dump978
hostname: dump978
restart: always
labels:
- "autoheal=true"
device_cgroup_rules:
- 'c 188:* rwm'
- 'c 189:* rwm'
environment:
- TZ=${FEEDER_TZ}
- LAT=${FEEDER_LAT}
- LON=${FEEDER_LONG}
# for stratuxv3 uncomment the following line
#- DUMP978_DEVICE_TYPE=stratuxv3
# for stratuxv3 remove the next 3 lines
- DUMP978_RTLSDR_DEVICE=${UAT_SDR_SERIAL}
- DUMP978_SDR_GAIN=${UAT_SDR_GAIN}
- DUMP978_SDR_PPM=${UAT_SDR_PPM}
volumes:
- /opt/adsb/dump978:/var/globe_history
- /dev:/dev:ro
tmpfs:
- /run:exec,size=64M
- /tmp:size=64M
- /var/log:size=32M
ultrafeeder:
image: ghcr.io/sdr-enthusiasts/docker-adsb-ultrafeeder
tty: true
container_name: ultrafeeder
hostname: ultrafeeder
restart: unless-stopped
device_cgroup_rules:
- "c 189:* rwm"
ports:
- 8080:80 # to expose the web interface
- 9273-9274:9273-9274 # to expose the statistics interface to Prometheus
environment:
# --------------------------------------------------
# general parameters:
- LOGLEVEL=error
- TZ=${FEEDER_TZ}
# --------------------------------------------------
# SDR related parameters:
- READSB_DEVICE_TYPE=rtlsdr
- READSB_RTLSDR_DEVICE=${ADSB_SDR_SERIAL}
- READSB_RTLSDR_PPM=${ADSB_SDR_PPM}
#
# --------------------------------------------------
# readsb/decoder parameters:
- READSB_LAT=${FEEDER_LAT}
- READSB_LON=${FEEDER_LONG}
- READSB_ALT=${FEEDER_ALT_M}m
- READSB_GAIN=${ADSB_SDR_GAIN}
- READSB_MODEAC=true
- READSB_RX_LOCATION_ACCURACY=2
- READSB_STATS_RANGE=true
#
# --------------------------------------------------
# Sources and Aggregator connections:
# (Note - remove the ones you are not using / feeding)
- ULTRAFEEDER_CONFIG=
adsb,dump978,30978,uat_in;
adsb,feed.adsb.fi,30004,beast_reduce_plus_out;
adsb,in.adsb.lol,30004,beast_reduce_plus_out;
adsb,feed.adsb.one,64004,beast_reduce_plus_out;
adsb,feed.planespotters.net,30004,beast_reduce_plus_out;
adsb,feed.theairtraffic.com,30004,beast_reduce_plus_out;
mlat,feed.adsb.fi,31090,39000;
mlat,in.adsb.lol,31090,39001;
mlat,feed.adsb.one,64006,39002;
mlat,mlat.planespotters.net,31090,39003;
mlat,feed.theairtraffic.com,31090,39004;
mlathub,piaware,30105,beast_in;
mlathub,rbfeeder,30105,beast_in;
mlathub,radarvirtuel,30105,beast_in
# If you really want to feed ADSBExchange, you can do so by adding this above:
# adsb,feed1.adsbexchange.com,30004,beast_reduce_plus_out,uuid=${ADSBX_UUID};
# mlat,feed.adsbexchange.com,31090,39005,uuid=${ADSBX_UUID}
#
# --------------------------------------------------
- UUID=${MULTIFEEDER_UUID}
- MLAT_USER=${FEEDER_NAME}
#
# --------------------------------------------------
# TAR1090 (Map Web Page) parameters:
- UPDATE_TAR1090=true
- TAR1090_DEFAULTCENTERLAT=${FEEDER_LAT}
- TAR1090_DEFAULTCENTERLON=${FEEDER_LONG}
- TAR1090_MESSAGERATEINTITLE=true
- TAR1090_PAGETITLE=${FEEDER_NAME}
- TAR1090_PLANECOUNTINTITLE=true
- TAR1090_ENABLE_AC_DB=true
- TAR1090_FLIGHTAWARELINKS=true
- HEYWHATSTHAT_PANORAMA_ID=${FEEDER_HEYWHATSTHAT_ID}
- HEYWHATSTHAT_ALTS=${FEEDER_HEYWHATSTHAT_ALTS}
- TAR1090_SITESHOW=true
- TAR1090_RANGE_OUTLINE_COLORED_BY_ALTITUDE=true
- TAR1090_RANGE_OUTLINE_WIDTH=2.0
- TAR1090_RANGERINGSDISTANCES=50,100,150,200
- TAR1090_RANGERINGSCOLORS='#1A237E','#0D47A1','#42A5F5','#64B5F6'
- TAR1090_USEROUTEAPI=true
#
# --------------------------------------------------
# GRAPHS1090 (Decoder and System Status Web Page) parameters:
# The two 978 related parameters should only be included if you are running dump978 for UAT reception (USA only)
- GRAPHS1090_DARKMODE=true
- URL_978=http://dump978/skyaware978
volumes:
- /opt/adsb/ultrafeeder/globe_history:/var/globe_history
- /opt/adsb/ultrafeeder/graphs1090:/var/lib/collectd
- /proc/diskstats:/proc/diskstats:ro
- /dev:/dev:ro
tmpfs:
- /run:exec,size=256M
- /tmp:size=128M
- /var/log:size=32M
piaware:
# piaware feeds ADS-B and UAT data (from ultrafeeder) to FlightAware. It also includes a GUI Radar website and a status website
# If you're not capturing UAT data with the dump978 container, remove or comment out the UAT_RECEIVER_TYPE and UAT_RECEIVER_HOST lines in the environment section below.
image: ghcr.io/sdr-enthusiasts/docker-piaware
# profiles:
# - donotstart
tty: true
container_name: piaware
hostname: piaware
restart: always
labels:
- "autoheal=true"
ports:
- 8081:8080
- 8088:80
environment:
- BEASTHOST=ultrafeeder
- LAT=${FEEDER_LAT}
- LONG=${FEEDER_LONG}
- TZ=${FEEDER_TZ}
- FEEDER_ID=${PIAWARE_FEEDER_ID}
- UAT_RECEIVER_TYPE=relay
- UAT_RECEIVER_HOST=dump978
tmpfs:
- /run:exec,size=64M
- /var/log
rbfeeder:
# rbfeeder feeds ADS-B and UAT data (from ultrafeeder) to RadarBox.
# If you're not capturing UAT data with the dump978 container, remove or comment out the UAT_RECEIVER_HOST line in the environment section below.
image: ghcr.io/sdr-enthusiasts/docker-radarbox
# profiles:
# - donotstart
tty: true
container_name: rbfeeder
hostname: rbfeeder
restart: always
labels:
- "autoheal=true"
environment:
- BEASTHOST=ultrafeeder
- UAT_RECEIVER_HOST=dump978
- LAT=${FEEDER_LAT}
- LONG=${FEEDER_LONG}
- ALT=${FEEDER_ALT_M}
- TZ=${FEEDER_TZ}
- SHARING_KEY=${RADARBOX_SHARING_KEY}
tmpfs:
- /run:exec,size=64M
- /var/log
You should now be feeding ADSB-ES & UAT to the "new" aggregators, FlightAware, and Radarbox.
Variable | Description | Default |
---|---|---|
TZ |
Local timezone in "TZ database name" format. | UTC |
LAT |
Latitude of your receiver. Only required if you want range statistics for InfluxDB, Prometheus, or tar1090/ultrafeeder graphs. | Unset |
LON |
Longitude of your receiver. Only required if you want range statistics for InfluxDB, Prometheus, or tar1090/ultrafeeder graphs. | Unset |
DUMP978_MSG_MONITOR_INTERVAL |
Interval between runs of the Message Monitor that checks if new messages are received. Format of value is anything that is accepted by the Linux sleep command |
Unset (30 minutes) |
DUMP978_MSG_MONITOR_RESTART_WHEN_STALE |
If set to true /on /yes /1 , the receiver process is restarted when no messages are received during the monitoring interval |
true |
Where the default value is "Unset", dump978-fa
's default will be used.
Variable | Description | Controls which dump978-fa option |
Default |
---|---|---|---|
DUMP978_DEVICE_TYPE |
Currently only rtlsdr and stratuxv3 is supported. If you have another type of radio, please open an issue and I'll try to get it added. |
--sdr driver= |
rtlsdr |
DUMP978_SDR_AGC |
Set to any value to enable SDR AGC. | --sdr-auto-gain |
Unset |
DUMP978_SDR_GAIN |
Set gain (in dB). Use autogain to have the container determine an appropriate gain, more on this below. | --sdr-gain |
Unset |
DUMP978_SDR_PPM |
Set SDR frequency correction in PPM. | --sdr-ppm |
Unset |
DUMP978_JSON_STDOUT |
Write decoded json to the container log. Useful for troubleshooting, but don't leave enabled! | --json-stdout |
Unset |
Use with DUMP978_DEVICE_TYPE=rtlsdr
.
Where the default value is "Unset", dump978-fa
's default will be used.
Variable | Description | Controls which dump978-fa option |
Default |
---|---|---|---|
DUMP978_RTLSDR_DEVICE |
If using Select device by serial number. | --sdr driver=rtlsdr,serial= |
Unset |
Variable | Description | Default |
---|---|---|
DUMP978_ENABLE_BIASTEE |
Set to any value to enable bias-tee on your RTL-SDR. | Unset |
NOTE: As of November 2, 2023, Telegraf support is only available in the container labeled ghcr.io/sdr-enthusiasts/docker-dump978:telegraf
. It is no longer available in ghcr.io/sdr-enthusiasts/docker-dump978:latest
. If you want to use Telegraf to send data to InfluxDB or Prometheus, please switch to the :telegraf
label.
These variables control the sending of flight data and dump978 metrics to InfluxDB (via a built-in instance of Telegraf).
Variable | Description | Default |
---|---|---|
INFLUXDBURL |
The full HTTP URL for your InfluxDB instance. Required for both InfluxDB v1 and v2. | Unset |
INFLUXDBUSERNAME |
If using authentication, a username for your InfluxDB instance. If not using authentication, leave unset. Not required for InfluxDB v2. | Unset |
INFLUXDBPASSWORD |
If using authentication, a password for your InfluxDB instance. If not using authentication, leave unset. Not required for InfluxDB v2. | Unset |
INFLUXDB_V2 |
Set to a non empty value to enable InfluxDB V2 output. | Unset |
INFLUXDB_V2_BUCKET |
Required if INFLUXDB_V2 is set, bucket must already exist in your InfluxDB v2 instance. |
Unset |
INFLUXDB_V2_ORG |
Required if INFLUXDB_V2 is set. |
Unset |
INFLUXDB_V2_TOKEN |
Required if INFLUXDB_V2 is set. |
Unset |
INFLUXDB_SKIP_AIRCRAFT |
Set to any value to skip publishing aircraft data to InfluxDB to minimize bandwidth and database size. | Unset |
NOTE: As of November 2, 2023, Telegraf support is only available in the container labeled ghcr.io/sdr-enthusiasts/docker-dump978:telegraf
. It is no longer available in ghcr.io/sdr-enthusiasts/docker-dump978:latest
. If you want to use Telegraf to send data to InfluxDB or Prometheus, please switch to the :telegraf
label.
These variables control exposing flight data to Prometheus (via a built-in instance of Telegraf).
Variable | Description | Default |
---|---|---|
ENABLE_PROMETHEUS |
Set to any string to enable Prometheus support | Unset |
PROMETHEUSPORT |
The port that the prometheus client will listen on | 9273 |
PROMETHEUSPATH |
The path that the prometheus client will publish metrics on | /metrics |
These variables control the autogain system (explained further below). These should rarely need changing from the defaults.
Variable | Description | Default |
---|---|---|
DUMP978_AUTOGAIN_INITIAL_TIMEPERIOD |
How long the autogain initialization phase should take (ie: "roughing in"), in seconds. | 21600 (6 hours) |
DUMP978_AUTOGAIN_INITIAL_INTERVAL |
How often autogain should measure and adjust the gain during the initialization phase, in seconds. | 600 (10 minutes) |
DUMP978_AUTOGAIN_SUBSEQUENT_INTERVAL |
How often autogain should measure and adjust the gain after the initialization phase is done, in seconds. | 84600 (24 hours) |
DUMP978_AUTOGAIN_ADJUSTMENT_LIMITS |
If set to true /on /yes /1 , while in the initialization phase, autogain will only adjust the gain during the timeframe set by the DUMP978_AUTOGAIN_ADJUSTMENT_TIMEFRAME parameter. |
true |
DUMP978_AUTOGAIN_ADJUSTMENT_TIMEFRAME |
Timeframe limits for autogain during the initializaion phase, in HHMM-HHMM (start hours/minutes to end hours/minutes). If an adjustment "run" falls outside these limits, the autogain adjustment is delayed until the start of the next timeframe. Times are based on the container's Timezone (TZ ) setting. |
0900-1800 (9 AM - 6 PM, local container time) |
DUMP978_AUTOGAIN_LOW_PCT |
If the percentage of "strong signals" (>3dB) over a measuring period is less than this parameter, the gain will be increased by 1 position | 2.5 (2.5%) |
DUMP978_AUTOGAIN_HIGH_PCT |
If the percentage of "strong signals" (>3dB) over a measuring period is more than this parameter, the gain will be decreased by 1 position | 6.0 (6.0%) |
READSB_AUTOGAIN_MIN_SAMPLES |
Minimum number of received samples for autogain to be able to consider adjusting the gain | 1000 |
READSB_AUTOGAIN_USE_RAW |
If set to true /on /yes /1 , the autogain function will use the "raw" message count rather than the "accepted" message count. |
true |
SUBSEQUENT_INTERVAL_MINIMUM_COMPLETION_PCT |
Minimum percentage of DUMP978_AUTOGAIN_SUBSEQUENT_INTERVAL time that needs to be completed before autogain will use the collected data during the subsequent/long-term process |
50 |
An automatic gain adjustment system is included in this container, and can be activated by setting the environment variable DUMP978_SDR_GAIN
to autogain
. You should also map /var/globe_history/
to persistent storage, otherwise the autogain system will start over each time the container is restarted.
Autogain will take several hours to initially work out a reasonable gain. This is the so-called "initialization period", which is by default 6 hours. It will then perform a daily measurement to see if your gain needs further adjusting.
The autogain system will work as follows; values are based on the default parameter settings from above:
dump978
is set to maximum gain.- Initial results are collected every 10 minutes, for up to 6 hours (initialization phase). If
DUMP978_AUTOGAIN_ADJUSTMENT_LIMITS
is set to true, measurements are suspended if the time is outside the set time limits (0900 - 1800 local container time). Every 10 minutes, the gain is adjusted by 1 position if the average percentage of "strong" signals (>-3dB) is less than 2.5% or more than 6.0%. - After the initialization phase is over, the average percentage of "strong signal" is calculated on a daily basis, and an adjustment is made accordingly.
Run docker exec dump978 autogain978 reset
to remove reset all autogain data and start the initialization phase fron scratch
When a gain adjustment is made, dump978-fa
and related processes are forcibly restarted. This will cause a number of messages to the container logs showing that these processes are terminated, and subsequently restarted. These messages are normal during an autogain gain adjustment, and are not errors in the container.
The container's webserver makes SkyAware978 (and the related data
directories with json
statistics files) available at /skyaware978
. This means, using the port mapping example shown above, that you can access these URLs (among other things):
- http://my_ip:30980/skyaware978 -- SkyAware978 map
- http://my_ip:30980/skyaware978/data/aircraft.json -- aircraft.json statistics file
- http://my_ip:30980/health -- HealthCheck results (returns
OK
if container is healthy)
- All processes are logged to the container's stdout, and can be viewed with
docker logs [-f] container
.
Please feel free to open an issue on the project's GitHub.
I also have a Discord channel, feel free to join and converse.