Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
[DPB Seastone] On boarding DPB feature to Seastone HWSKUs (sonic-net#…
…4235) This include the platform.json for Seastone platform and individual hwsku.json for each HWSKU port_config.ini will be removed once the CLI/parser library etc changes are merged **- What I did** On boarding DPB feature to Seastone HWSKUs **- How I did it** Add platform.json for Seastone and hwsku.json files to relevant HWSKUs. **- How to verify it** ``` sudo sonic-cfggen -H -k Seastone-DX010 --preset=t1 > config_db.json sudo config reload config_db.json -y show interface status: admin@lnos-x1-a-csw03:~$ show interfaces status Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC ----------- --------------- ------- ----- ----- ------- ------ ------ ------- ------ ---------- Ethernet0 65,66,67,68 100G 9100 N/A Eth1/1 routed down up N/A N/A Ethernet4 69,70,71,72 100G 9100 N/A Eth2/1 routed down up N/A N/A Ethernet8 73,74,75,76 100G 9100 N/A Eth3/1 routed down up N/A N/A Ethernet12 77,78,79,80 100G 9100 N/A Eth4/1 routed down up N/A N/A Ethernet16 33,34,35,36 100G 9100 N/A Eth5/1 routed down up N/A N/A Ethernet20 37,38,39,40 100G 9100 N/A Eth6/1 routed down up N/A N/A Ethernet24 41,42,43,44 100G 9100 N/A Eth7/1 routed down up N/A N/A Ethernet28 45,46,47,48 100G 9100 N/A Eth8/1 routed down up N/A N/A Ethernet32 49,50,51,52 100G 9100 N/A Eth9/1 routed down up N/A N/A Ethernet36 53,54,55,56 100G 9100 N/A Eth10/1 routed down up N/A N/A Ethernet40 57,58,59,60 100G 9100 N/A Eth11/1 routed down up N/A N/A Ethernet44 61,62,63,64 100G 9100 N/A Eth12/1 routed down up N/A N/A Ethernet48 81,82,83,84 100G 9100 N/A Eth13/1 routed down up N/A N/A Ethernet52 85,86,87,88 100G 9100 N/A Eth14/1 routed down up N/A N/A Ethernet56 89,90,91,92 100G 9100 N/A Eth15/1 routed down up N/A N/A Ethernet60 93,94,95,96 100G 9100 N/A Eth16/1 routed down up N/A N/A Ethernet64 97,98,99,100 100G 9100 N/A Eth17/1 routed down up N/A N/A Ethernet68 101,102,103,104 100G 9100 N/A Eth18/1 routed down up N/A N/A Ethernet72 105,106,107,108 100G 9100 N/A Eth19/1 routed up up N/A N/A Ethernet76 109,110,111,112 100G 9100 N/A Eth20/1 routed down up N/A N/A Ethernet80 1,2,3,4 100G 9100 N/A Eth21/1 routed down up N/A N/A Ethernet84 5,6,7,8 100G 9100 N/A Eth22/1 routed down up N/A N/A Ethernet88 9,10,11,12 100G 9100 N/A Eth23/1 routed down up N/A N/A Ethernet92 13,14,15,16 100G 9100 N/A Eth24/1 routed down up N/A N/A Ethernet96 17,18,19,20 100G 9100 N/A Eth25/1 routed down up N/A N/A Ethernet100 21,22,23,24 100G 9100 N/A Eth26/1 routed down up N/A N/A Ethernet104 25,26,27,28 100G 9100 N/A Eth27/1 routed down up N/A N/A Ethernet108 29,30,31,32 100G 9100 N/A Eth28/1 routed down up N/A N/A Ethernet112 113,114,115,116 100G 9100 N/A Eth29/1 routed down up N/A N/A Ethernet116 117,118,119,120 100G 9100 N/A Eth30/1 routed down up N/A N/A Ethernet120 121,122,123,124 100G 9100 N/A Eth31/1 routed down up N/A N/A Ethernet124 125,126,127,128 100G 9100 N/A Eth32/1 routed down up N/A N/A ``` **Breakout to 2x50G:** ``` admin@lnos-x1-a-csw03:~$ sudo config interface breakout Ethernet0 2x50G -y -f Running Breakout Mode : 1x100G[40G] Target Breakout Mode : 2x50G Ports to be deleted : { "Ethernet0": "100000" } Ports to be added : { "Ethernet2": "50000", "Ethernet0": "50000" } After running Logic to limit the impact Final list of ports to be deleted : { "Ethernet0": "100000" } Final list of ports to be added : { "Ethernet2": "50000", "Ethernet0": "50000" } Loaded below Yang Models ['sonic-acl', 'sonic-extension', 'sonic-interface', 'sonic-loopback-interface', 'sonic-port', 'sonic-portchannel', 'sonic-types', 'sonic-vlan'] Note: Below table(s) have no YANG models: CONTAINER_FEATURE, BGP_NEIGHBOR, VERSIONS, DEVICE_METADATA, FEATURE, LOCK, BREAKOUT_CFG, CRM, Below Config can not be verified, It may cause harm to the system { "BREAKOUT_CFG": { "Ethernet0": { "brkout_mode": "1x100G[40G]" } } } Do you wish to Continue? [y/N]: y Breakout process got successfully completed. Please note loaded setting will be lost after system reboot. To preserve setting, run `config save`. admin@lnos-x1-a-csw03:~$ admin@lnos-x1-a-csw03:~$ admin@lnos-x1-a-csw03:~$ show interfaces status Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC ----------- --------------- ------- ----- ----- ------- ------ ------ ------- ------ ---------- Ethernet0 65,66 50G N/A N/A Eth1/1 routed down up N/A N/A Ethernet2 67,68 50G 9100 N/A Eth1/3 routed down up N/A N/A admin@lnos-x1-a-csw03:~$ bcmcmd ps ps ena/ speed/ link auto STP lrn inter max cut loop port link Lns duplex scan neg? state pause discrd ops face frame thru? back xe0( 68) down 2 50G FD SW No Forward None FA KR2 9412 No xe1( 69) !ena 1 - SW No Forward None FA None 9122 No ``` **Breakout to 4x25G[10G]:** ``` admin@lnos-x1-a-csw03:~$ sudo config interface breakout Ethernet0 4x25G[10G] -y -f Running Breakout Mode : 2x50G Target Breakout Mode : 4x25G[10G] Ports to be deleted : { "Ethernet2": "50000", "Ethernet0": "50000" } Ports to be added : { "Ethernet2": "25000", "Ethernet3": "25000", "Ethernet0": "25000", "Ethernet1": "25000" } After running Logic to limit the impact Final list of ports to be deleted : { "Ethernet2": "50000", "Ethernet0": "50000" } Final list of ports to be added : { "Ethernet2": "25000", "Ethernet3": "25000", "Ethernet0": "25000", "Ethernet1": "25000" } Loaded below Yang Models ['sonic-acl', 'sonic-extension', 'sonic-interface', 'sonic-loopback-interface', 'sonic-port', 'sonic-portchannel', 'sonic-types', 'sonic-vlan'] Note: Below table(s) have no YANG models: CONTAINER_FEATURE, BGP_NEIGHBOR, VERSIONS, DEVICE_METADATA, FEATURE, LOCK, BREAKOUT_CFG, CRM, Below Config can not be verified, It may cause harm to the system { "BREAKOUT_CFG": { "Ethernet0": { "brkout_mode": "2x50G" } } } Do you wish to Continue? [y/N]: y Breakout process got successfully completed. Please note loaded setting will be lost after system reboot. To preserve setting, run `config save`. admin@lnos-x1-a-csw03:~$ show interfaces status Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC ----------- --------------- ------- ----- ----- ------- ------ ------ ------- ------ ---------- Ethernet0 65 25G N/A N/A Eth1/1 routed down up N/A N/A Ethernet1 66 25G 9100 N/A Eth1/2 routed down up N/A N/A Ethernet2 67 25G N/A N/A Eth1/3 routed down up N/A N/A Ethernet3 68 25G 9100 N/A Eth1/4 routed down up N/A N/A admin@lnos-x1-a-csw03:~$ bcmcmd ps ps ena/ speed/ link auto STP lrn inter max cut loop port link Lns duplex scan neg? state pause discrd ops face frame thru? back xe0( 68) down 1 25G FD SW No Forward None FA KR 9412 No xe1( 69) down 1 25G FD SW No Forward None FA KR 9122 No xe2( 70) down 1 25G FD SW No Forward None FA KR 9412 No xe3( 71) down 1 25G FD SW No Forward None FA KR 9122 No ``` **Breakin back to 1x100G[40G]:** ``` admin@lnos-x1-a-csw03:~$ sudo config interface breakout Ethernet0 1x10G[40G] -y -f [ERROR] Target mode 1x10G[40G] is not available for the port Ethernet0 Aborted! admin@lnos-x1-a-csw03:~$ sudo config interface breakout Ethernet0 1x100G[40G] -y -f Running Breakout Mode : 4x25G[10G] Target Breakout Mode : 1x100G[40G] Ports to be deleted : { "Ethernet2": "25000", "Ethernet3": "25000", "Ethernet0": "25000", "Ethernet1": "25000" } Ports to be added : { "Ethernet0": "100000" } After running Logic to limit the impact Final list of ports to be deleted : { "Ethernet2": "25000", "Ethernet3": "25000", "Ethernet0": "25000", "Ethernet1": "25000" } Final list of ports to be added : { "Ethernet0": "100000" } Loaded below Yang Models ['sonic-acl', 'sonic-extension', 'sonic-interface', 'sonic-loopback-interface', 'sonic-port', 'sonic-portchannel', 'sonic-types', 'sonic-vlan'] Note: Below table(s) have no YANG models: CONTAINER_FEATURE, BGP_NEIGHBOR, VERSIONS, DEVICE_METADATA, FEATURE, LOCK, FLEX_COUNTER_TABLE, BREAKOUT_CFG, CRM, Below Config can not be verified, It may cause harm to the system { "BREAKOUT_CFG": { "Ethernet0": { "brkout_mode": "4x25G[10G]" } } } Do you wish to Continue? [y/N]: y Breakout process got successfully completed. Please note loaded setting will be lost after system reboot. To preserve setting, run `config save`. admin@lnos-x1-a-csw03:~$ show interfaces status Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC ----------- --------------- ------- ----- ----- ------- ------ ------ ------- ------ ---------- Ethernet0 65,66,67,68 100G N/A N/A Eth1/1 routed down up N/A N/A admin@lnos-x1-a-csw03:~$ bcmcmd ps ps ena/ speed/ link auto STP lrn inter max cut loop port link Lns duplex scan neg? state pause discrd ops face frame thru? back ce0( 68) down 4 100G FD SW No Forward None FA KR4 9412 No xe0( 69) !ena 1 - SW No Forward None FA None 9122 No xe1( 70) !ena 2 - SW No Forward None FA None 9412 No xe2( 71) !ena 1 - SW No Forward None FA None 9122 No ``` Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
- Loading branch information
1 parent
7869666
commit ac674da