A Tonewheel organ emulation for Teensy 3.2 + Audio board based on ideas and code of 'roto2' of Peter Teichmann, https://github.com/pteichman/roto2
- 2 parts as upper- and lower manual, with independent drawbar settings
- 8 note polyphony per part
- A (flimsy) rotary and distortion emulator
- Vibrato and Chorus
- Comprehensive MIDI-control
- dynamic generation of wavetables with regard to fold over of tonewheels on high- and sub-registers
- introducing a 9:1 audio-mixer (see AudioSum.h)
Used MIDI channels: 1, 2
Function | CC-No. | Values |
---|---|---|
Drawbar 16"...1" | 41..48, 28 | CC values 0..127 are mapped to drawbar position 0..8 |
Vibrato/Chorus* | 21 | 0..127 mapped to V3...V1, Off, C1..C3 |
Perc. volume* | 22 | 0..127 mapped to Vol 2nd, Off, Vol 3rd |
Perc. decay | 23 | 0..127: fast..slow |
Rotary speed | 01 (Modulation) | 0..127: slow..whirl (no rampup/rampdown) |
Rotary balance | 24 | 0..127: dry(direct)...wet(effect only) |
Distortion | 25 | 0..127: off...insane |
Keyclick volume | 26 | 0..127: off...clicky |
Release | 72 | Tone envelope release |
Attack | 73 | Tone envelope attack |
DSP Volume | 07 (Volume) | Volume of upper/lower tonegenerator (DSP) |
Audio volume | 11 (Expression) | Volume of audio board 0..127 mapped to 40..90% |
EQ low | 75 | Audio board EQ low |
EQ high | 76 | Audio board EQ high |
Settings are not stored im EEPROM-memory. CC-numbers can by taylored to your own liking in MidiSetup.h
Lot of space for improvements
RAM: [===== ] 46.4% (used 30388 bytes from 65536 bytes)
Flash: [== ] 22.8% (used 59848 bytes from 262144 bytes)
This repository is a copy of my PlatformIO workspace.
- copy the 'src' folder to an appropriate place, e.g. your Arduino projects folder
- rename directory to 'TORGL'
- open TORGL.ino in Arduino IDE
Board: "Teensy 3.1/3.2"
USB-Type: "Serial + MIDI"