Add Icons, Converti and Horizontal swing support

.gitignore

@@ -1 +1,2 @@
-.vscode/*
+.vscode/*
+.DS_Store

README.md

@@ -48,3 +48,26 @@
 1. Enter your `username` and `password` in the appropriate fields.
     - use the country code for the phone number e.g. `+91XXXXXX`
 2. Submit the form.
+
+## Caveats
+HomeAssistant does not provide separate functionality to horizontal and vertical swings so they have been clubbed together to function correctly but with reduced observation as follows:
+
+The Vertical states are preferred over horizontal states unless the vertical state is set to V0(auto).
+You can take a look at the following table to understand the outcome.
+| Mode set in UI | Mode set in AC | Mode displayed on UI when vertical swing is on auto mode | Mode displayed on UI when vertical swing is NOT on auto mode |
+|---|---|---|---|
+| V0 | V0 | V0 | V0 |
+| V1 | V1 | V1 | V1 |
+| V2 | V2 | V2 | V2 |
+| V3 | V3 | V3 | V3 |
+| V4 | V4 | V4 | V4 |
+| V5 | V5 | V5 | V5 |
+| H0 | H0 | H0 | Vx |
+| H1 | H1 | H1 | Vx |
+| H2 | H2 | H2 | Vx |
+| H3 | H3 | H3 | Vx |
+| H4 | H4 | H4 | Vx |
+| H5 | H5 | H5 | Vx |
+
+Here `Vx` is the vertical swing mode set before and x can be either of 1, 2, 3, 4, 5.
+Note: Even with `Vx` being displayed on the UI the AC would still be set to proper Horizontal swing mode so you can use your automation to control the horizontal swing mode but might not be able to watch for mode changes in horizontal mode.

custom_components/miraie/climate.py

@@ -9,6 +9,7 @@
     FanMode,
     SwingMode,
     PresetMode,
+    ConvertiMode,
 )
 
 from homeassistant.components.climate import (
@@ -35,12 +36,26 @@
 
 from .const import (
     DOMAIN,
-    SWING_ON,
-    SWING_ONE,
-    SWING_TWO,
-    SWING_THREE,
-    SWING_FOUR,
-    SWING_FIVE,
+    V0,
+    V1,
+    V2,
+    V3,
+    V4,
+    V5,
+    H0,
+    H1,
+    H2,
+    H3,
+    H4,
+    H5,
+    PRESET_CONVERTI_C110,
+    PRESET_CONVERTI_C100,
+    PRESET_CONVERTI_C90,
+    PRESET_CONVERTI_C80,
+    PRESET_CONVERTI_C70,
+    PRESET_CONVERTI_C55,
+    PRESET_CONVERTI_C40,
+    PRESET_CONVERTI_C0,
 )
 
 async def async_setup_entry(
@@ -67,7 +82,7 @@ def __init__(self, device: MirAIeDevice) -> None:
             HVACMode.DRY,
             HVACMode.FAN_ONLY,
         ]
-        self._attr_preset_modes = [PRESET_NONE, PRESET_ECO, PRESET_BOOST]
+        self._attr_preset_modes = [PRESET_NONE, PRESET_ECO, PRESET_BOOST, PRESET_CONVERTI_C110, PRESET_CONVERTI_C100, PRESET_CONVERTI_C90, PRESET_CONVERTI_C80, PRESET_CONVERTI_C70, PRESET_CONVERTI_C55, PRESET_CONVERTI_C40, PRESET_CONVERTI_C0]
         self._attr_fan_mode = FAN_OFF
         self._attr_fan_modes = [
             FAN_AUTO,
@@ -76,7 +91,7 @@ def __init__(self, device: MirAIeDevice) -> None:
             FAN_HIGH,
             FAN_OFF,
         ]
-        self._attr_swing_modes = [SWING_ON, SWING_ONE, SWING_TWO, SWING_THREE, SWING_FOUR, SWING_FIVE]
+        self._attr_swing_modes = [V0, V1, V2, V3, V4, V5, H0, H1, H2, H3, H4, H5]
         self._attr_max_temp = 30.0
         self._attr_min_temp = 16.0
         self._attr_target_temperature_step = 1
@@ -98,6 +113,11 @@ def __init__(self, device: MirAIeDevice) -> None:
     def name(self) -> str:
         """Return the display name of this light."""
         return self.device.friendly_name
+
+    @property
+    def translation_key(self) -> str:
+        """Return the translation key."""
+        return DOMAIN
 
     @property
     def icon(self) -> str | None:
@@ -148,7 +168,9 @@ def target_temperature(self) -> float | None:
 
     @property
     def preset_mode(self) -> str | None:
-        return self.device.status.preset_mode.value
+        if self.device.status.converti_mode == ConvertiMode.OFF:
+            return self.device.status.preset_mode.value
+        return f"cv {self.device.status.converti_mode.value}"
 
     @property
     def fan_mode(self) -> str | None:
@@ -163,20 +185,36 @@ def fan_mode(self) -> str | None:
     @property
     def swing_mode(self) -> str | None:
 
-        mode = self.device.status.swing_mode.value
+        mode = self.device.status.v_swing_mode.value
 
         if mode == 1:
-            return SWING_ONE
+            return V1
+        elif mode == 2:
+            return V2
+        elif mode == 3:
+            return V3
+        elif mode == 4:
+            return V4
+        elif mode == 5:
+            return V5
+
+        # In case the Vertial swing is set to auto, we can show horizontal swing
+        mode = self.device.status.h_swing_mode.value
+        if mode == 0:
+            # Signifies that both horizontal and vertical swing are enabled.
+            return H0
+        elif mode == 1:
+            return H1
         elif mode == 2:
-            return SWING_TWO
+            return H2
         elif mode == 3:
-            return SWING_THREE
+            return H3
         elif mode == 4:
-            return SWING_FOUR
+            return H4
         elif mode == 5:
-            return SWING_FIVE
+            return H5
 
-        return SWING_ON
+        return V0
 
     async def async_turn_off(self) -> None:
         await self.async_set_hvac_mode(HVACMode.OFF)
@@ -209,21 +247,40 @@ async def async_set_fan_mode(self, fan_mode: str) -> None:
 
     async def async_set_swing_mode(self, swing_mode: str) -> None:
 
-        if swing_mode == SWING_ONE:
-            await self.device.set_swing_mode(SwingMode(1))
-        elif swing_mode == SWING_TWO:
-            await self.device.set_swing_mode(SwingMode(2))
-        elif swing_mode == SWING_THREE:
-            await self.device.set_swing_mode(SwingMode(3))
-        elif swing_mode == SWING_FOUR:
-            await self.device.set_swing_mode(SwingMode(4))
-        elif swing_mode == SWING_FIVE:
-            await self.device.set_swing_mode(SwingMode(5))
-        else:
-            await self.device.set_swing_mode(SwingMode(0))
+        if swing_mode.startswith('V'):
+            if swing_mode == V1:
+                await self.device.set_v_swing_mode(SwingMode(1))
+            elif swing_mode == V2:
+                await self.device.set_v_swing_mode(SwingMode(2))
+            elif swing_mode == V3:
+                await self.device.set_v_swing_mode(SwingMode(3))
+            elif swing_mode == V4:
+                await self.device.set_v_swing_mode(SwingMode(4))
+            elif swing_mode == V5:
+                await self.device.set_v_swing_mode(SwingMode(5))
+            else:
+                await self.device.set_v_swing_mode(SwingMode(0))
+
+        elif swing_mode.startswith('H'):
+            if swing_mode == H1:
+                await self.device.set_h_swing_mode(SwingMode(1))
+            elif swing_mode == H2:
+                await self.device.set_h_swing_mode(SwingMode(2))
+            elif swing_mode == H3:
+                await self.device.set_h_swing_mode(SwingMode(3))
+            elif swing_mode == H4:
+                await self.device.set_h_swing_mode(SwingMode(4))
+            elif swing_mode == H5:
+                await self.device.set_h_swing_mode(SwingMode(5))
+            else:
+                await self.device.set_h_swing_mode(SwingMode(0))
 
     async def async_set_preset_mode(self, preset_mode: str) -> None:
-        await self.device.set_preset_mode(PresetMode(preset_mode))
+        if preset_mode.startswith("cv"):
+            preset_mode = int(preset_mode.split(" ")[1])
+            await self.device.set_converti_mode(ConvertiMode(preset_mode))
+        else:
+            await self.device.set_preset_mode(PresetMode(preset_mode))
 
     async def async_added_to_hass(self) -> None:
         """Run when this Entity has been added to HA."""

custom_components/miraie/const.py

@@ -3,9 +3,26 @@
 DOMAIN = "miraie"
 
 # Possible swing state
-SWING_ON = "0"
-SWING_ONE = "1"
-SWING_TWO = "2"
-SWING_THREE = "3"
-SWING_FOUR = "4"
-SWING_FIVE = "5"
+H0 = "H0"
+H1 = "H1"
+H2 = "H2"
+H3 = "H3"
+H4 = "H4"
+H5 = "H5"
+
+V0 = "V0"
+V1 = "V1"
+V2 = "V2"
+V3 = "V3"
+V4 = "V4"
+V5 = "V5"
+
+# Preset for Converti
+PRESET_CONVERTI_C110 = "cv 110"
+PRESET_CONVERTI_C100 = "cv 100"
+PRESET_CONVERTI_C90 = "cv 90"
+PRESET_CONVERTI_C80 = "cv 80"
+PRESET_CONVERTI_C70 = "cv 70"
+PRESET_CONVERTI_C55 = "cv 55"
+PRESET_CONVERTI_C40 = "cv 40"
+PRESET_CONVERTI_C0 = "cv 0"

custom_components/miraie/icons.json

@@ -0,0 +1,39 @@
+{
+  "entity": {
+    "climate": {
+      "miraie": {
+        "state_attributes": {
+          "swing_mode": {
+            "state": {
+              "V0": "mdi:swap-vertical",
+              "V1": "mdi:arrow-up-thin",
+              "V2": "mdi:format-vertical-align-top",
+              "V3": "mdi:format-vertical-align-center",
+              "V4": "mdi:format-vertical-align-bottom",
+              "V5": "mdi:arrow-down-thin",
+              "H0": "mdi:swap-horizontal",
+              "H1": "mdi:format-horizontal-align-center",
+              "H2": "mdi:arrow-left-thin",
+              "H3": "mdi:arrow-expand-left",
+              "H4": "mdi:arrow-expand-right",
+              "H5": "mdi:arrow-right-thin"
+            }
+          },
+          "preset_mode": {
+            "state": {
+              "none": "mdi:air-conditioner",
+              "cv 110": "mdi:alpha-h-circle",
+              "cv 100": "mdi:alpha-f-circle",
+              "cv 90": "mdi:circle-slice-7",
+              "cv 80": "mdi:circle-slice-6",
+              "cv 70": "mdi:circle-slice-5",
+              "cv 55": "mdi:circle-slice-4",
+              "cv 40": "mdi:circle-slice-3",
+              "cv 0": "mdi:circle-outline"
+            }
+          }
+        }
+      }
+    }
+  }
+}

custom_components/miraie/manifest.json

@@ -4,7 +4,7 @@
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/miraie",
   "requirements": [
-    "miraie-ac==1.0.3",
+    "miraie-ac==1.0.4",
     "asyncio>=3.4.3",
     "aiomqtt>=2.0.1"
   ],
@@ -16,5 +16,5 @@
     "@Kir4Kun"
   ],
   "iot_class": "cloud_push",
-  "version": "1.0.3"
+  "version": "1.0.4"
 }