Warning: This project contains several hundred parts to print and hundreds hours of print. If you decide to take this path you will suffer a lot, you may lose some compatriot in the battle. You will no longer be the same after that, it could also cause hair loss.
This project is basically a small stargate made to decorate your desk. It features lightning for symbols like in the serie and the ring spins.
https://www.youtube.com/watch?v=xp08K564FYA for more details.
Unfortunately this project went through a lot of trial and error, so there are more parts than it should have especially in the base. Optimize it would require making a second gate to test new optimization. I'm no willing to do that now.
Inspired partly by:
URL |
---|
https://thestargateproject.com/build-a-stargate-and-dhd-3d-printed/ |
https://www.youtube.com/watch?v=m0cj_5DWYjw&ab_channel=StargateFan |
- The start-up and recharge plunger is not perfect, using pogo pin and gold plated female contactor may improve it.
Copyright:
File | Info |
---|---|
stargateuniverse.woff | Created by : Gilles Nuytens (http://www.thescifiworld.net/fonts.htm) |
eurostile_extended2_bold.woff | https://fontsgeek.com/fonts/eurostile-extended-2-bold?ref=readme |
ancient_virtual.ttf.woff | Created by VirtualCLD (http://www.thescifiworld.net/fonts.htm) |
MGM (for the franchise) | |
Explanation and inspiration for the design | https://stargate.fandom.com/wiki/Glyph#Milky_Way_glyphs |
Adafruit | OLED library |
File | Info |
---|---|
DF Robot | https://www.dfrobot.com/ |
Embedded file generator (python) | Created by ducalex https://github.com/ducalex |
- Correct knowledge of ESP32 and programming with ESP-IDF
- At least 22 x 22 cm printer, capable of printing with 0.2 mm nozzle (yes, 0.2mm !)
Warning: Don't even think of printing it using a bigger nozzle, it just won't work. - Have some knowledge in electronic.
- ESP-IDF toolkit installed (tested on IDF 5.0)
Name | Description |
---|---|
base-fw | Base control firmware |
ring-factory | Basic firmware to upload firmware into ring |
ring-fw | Ring firmware |
tools/otauploader.py | Do upload using HTTP for OTA |
tools/embeddedgen.py | Generate embedded resources |
A new electronic board has been created. Not yet tested entierely.
File name | Count |
---|---|
Alignment-block-0.2mm_x9.stl | 9 |
Chevron-insert-tool.stl | 1 |
Home-magnet-holder_0.4mm-x1.stl | 1 |
Inner-ring-0.4mm_x1.stl | 1 |
Inner-ring-sensor-holder_0.4mm-x1.stl | 1 |
Light-chevron-0.2mm_x18.stl | 18 |
Light-chevron-cover-0.2mm-x9.stl | 9 |
Magnet-ring-0.2mm-x1.stl | 1 |
Module-With_wheel-0.2mm_x18.stl | 18 |
Stargate-Back-0.2mm_x1.stl | 1 |
Stargate-Back-Transparent-PwrSw_0.2mm-x1 | 1 |
Stargate-Back-Transparent-ResetBtn_0.2mm-x1 | 1 |
Stargate-Back-TransWindow-0.2mm-x10-12.stl | 12 |
Stargate-Front-0.2mm_x1.stl | 1 |
Symbols/symbol-template10_0.2mm-x1.stl | 1 |
Symbols/symbol-template11_0.2mm-x1.stl | 1 |
Symbols/symbol-template12_0.2mm-x1.stl | 1 |
Symbols/symbol-template13_0.2mm-x1.stl | 1 |
Symbols/symbol-template14_0.2mm-x1.stl | 1 |
Symbols/symbol-template15_0.2mm-x1.stl | 1 |
Symbols/symbol-template16_0.2mm-x1.stl | 1 |
Symbols/symbol-template17_0.2mm-x1.stl | 1 |
Symbols/symbol-template18_0.2mm-x1.stl | 1 |
Symbols/symbol-template19_0.2mm-x1.stl | 1 |
Symbols/symbol-template1_0.2mm-x1.stl | 1 |
Symbols/symbol-template20_0.2mm-x1.stl | 1 |
Symbols/symbol-template21_0.2mm-x1.stl | 1 |
Symbols/symbol-template22_0.2mm-x1.stl | 1 |
Symbols/symbol-template23_0.2mm-x1.stl | 1 |
Symbols/symbol-template24_0.2mm-x1.stl | 1 |
Symbols/symbol-template25_0.2mm-x1.stl | 1 |
Symbols/symbol-template26_0.2mm-x1.stl | 1 |
Symbols/symbol-template27_0.2mm-x1.stl | 1 |
Symbols/symbol-template28_0.2mm-x1.stl | 1 |
Symbols/symbol-template29_0.2mm-x1.stl | 1 |
Symbols/symbol-template2_0.2mm-x1.stl | 1 |
Symbols/symbol-template30_0.2mm-x1.stl | 1 |
Symbols/symbol-template31_0.2mm-x1.stl | 1 |
Symbols/symbol-template32_0.2mm-x1.stl | 1 |
Symbols/symbol-template33_0.2mm-x1.stl | 1 |
Symbols/symbol-template34_0.2mm-x1.stl | 1 |
Symbols/symbol-template35_0.2mm-x1.stl | 1 |
Symbols/symbol-template36_0.2mm-x1.stl | 1 |
Symbols/symbol-template3_0.2mm-x1.stl | 1 |
Symbols/symbol-template4_0.2mm-x1.stl | 1 |
Symbols/symbol-template5_0.2mm-x1.stl | 1 |
Symbols/symbol-template6_0.2mm-x1.stl | 1 |
Symbols/symbol-template7_0.2mm-x1.stl | 1 |
Symbols/symbol-template8_0.2mm-x1.stl | 1 |
Symbols/symbol-template9_0.2mm-x1.stl | 1 |
symbol-light-guide_0.2mm-x36.stl | 36 |
Lower-bridge-0.4mm-x1.stl | 1 |
TOTAL | 148 |
File name | Count |
---|---|
Back-plunger-anchor_4mm-x2.stl | 2 |
Back-plunger-arm_4mm-x1.stl | 1 |
Back-plunger-bar_4mm-x1.stl | 1 |
Back-plunger-Higher-spring_4mm-x1.stl | 1 |
Back-plunger-Lower-spring_4mm-x1.stl | 1 |
black-plunger-hammer-cover_4mm-x1.stl | 1 |
black-plunger-hammer_4mm-x1.stl | 1 |
Board-holder_4mm-x1.stl | 1 |
Bottom-plate-v2_4mm-x1.stl | 1 |
magnet-gear_4mm-x1.stl | 1 |
Mechanic-Anchor-L_4mm-x1.stl | 1 |
Mechanic-Anchor-R_4mm-x1.stl | 1 |
Mechanic-Archor-p2-L_4mm-x1.stl | 1 |
Mechanic-Archor-p2-R_4mm-x1.stl | 1 |
Outer-back-cover-plug-blocking_4mm-x1.stl | 1 |
Outer-back-cover-plug_4mm-x1.stl | 1 |
Outer-back-cover_4mm-x1.stl | 1 |
Outer-back-plate-reinforcement_4mm-x1.stl | 1 |
Outer-back-plate_4mm-x1.stl | 1 |
Outer-bottom-plate2_4mm-x1.stl | 1 |
Outer-bottom-plate_4mm-x1.stl | 1 |
Outer-front-plate_4mm-x1.stl | 1 |
Outer-side-plate#1_4mm-x1.stl | 1 |
Outer-side-plate#2_4mm-x1.stl | 1 |
ramp-light-guide_4mm-x2.stl | 2 |
Ramp_4mm-x1.stl | 1 |
Side-back-cover-L_4mm-x1.stl | 1 |
Side-back-cover-R_4mm-x1.stl | 1 |
Side-ramp-cover-L_4mm-x1.stl | 1 |
Side-ramp-cover-R_4mm-x1.stl | 1 |
spacer_4mm-x4.stl | 4 |
Stepper-bracket_4mm-x1.stl | 1 |
Stepper-mount-1_4mm-x1.stl | 1 |
Stepper-mount-2_4mm-x1.stl | 1 |
top-cover_4mm-x1.stl | 1 |
Truss#1_4mm-x1.stl | 1 |
Truss#2_4mm-x1.stl | 1 |
Side-overcover-L_4mm-x1.stl | 1 |
Side-overcover-R_4mm-x1.stl | 1 |
TOTAL | 44 |
File name | Count |
---|---|
Wormhole.stl | 1 |
Wormhole-outer-rim.stl | 1 |
Wormhole-filter.stl | 1 |
TOTAL | 3 |