Peaq-network-node

Getting Started

Rust Setup

First, complete the basic Rust setup instructions.

Run

Currently, because we are moving to the parachain, we need to use parachain-launch to start the parachain. Please refer to this project, parachain-launch , to more information.

Build

The cargo run command will perform an initial build. Use the following command to build the node without launching it:

cargo build --release

Embedded Docs

Once the project has been built, the following command can be used to explore all parameters and subcommands:

./target/release/peaq-node -h

Run

The provided cargo run command will launch a temporary node and its state will be discarded after you terminate the process. After the project has been built, there are other ways to launch the node.

Single-Node Development Chain

Because we are the parachain now, we don't support the Single-Node Development Chain. However, you can start the parachain by parachain-launch.

Connect with Polkadot-JS Apps Front-end

Once the node template is running locally, you can connect it with Polkadot-JS Apps front-end to interact with your chain. Click here connecting the Apps to your local node template.

Multi-Node Local Testnet

The same as the Single-Node Development Chain.

Node

A blockchain node is an application that allows users to participate in a blockchain network. Substrate-based blockchain nodes expose a number of capabilities:

• Networking: Substrate nodes use the libp2p networking stack to allow the nodes in the network to communicate with one another.
• Consensus: Blockchains must have a way to come to consensus on the state of the network. Substrate makes it possible to supply custom consensus engines and also ships with several consensus mechanisms that have been built on top of Web3 Foundation research.
• RPC Server: A remote procedure call (RPC) server is used to interact with Substrate nodes.

There are several files in the node directory - take special note of the following:

• chain_spec.rs: A chain specification is a source code file that defines a Substrate chain's initial (genesis) state. Chain specifications are useful for development and testing, and critical when architecting the launch of a production chain. Take note of the development_config and testnet_genesis functions, which are used to define the genesis state for the local development chain configuration. These functions identify some well-known accounts and use them to configure the blockchain's initial state.
• service.rs: This file defines the node implementation. Take note of the libraries that this file imports and the names of the functions it invokes. In particular, there are references to consensus-related topics, such as the longest chain rule, the Aura block authoring mechanism and the GRANDPA finality gadget.

After the node has been built, refer to the embedded documentation to learn more about the capabilities and configuration parameters that it exposes:

./target/release/peaq-node --help

Runtime

In Substrate, the terms "runtime" and "state transition function" are analogous - they refer to the core logic of the blockchain that is responsible for validating blocks and executing the state changes they define. The Substrate project in this repository uses the FRAME framework to construct a blockchain runtime. FRAME allows runtime developers to declare domain-specific logic in modules called "pallets". At the heart of FRAME is a helpful macro language that makes it easy to create pallets and flexibly compose them to create blockchains that can address a variety of needs.

Review the FRAME runtime implementation included in this template and note the following:

• This file configures several pallets to include in the runtime. Each pallet configuration is defined by a code block that begins with impl $PALLET_NAME::Config for Runtime.
• The pallets are composed into a single runtime by way of the construct_runtime! macro, which is part of the core FRAME Support library.

Pallets

The runtime in this project is constructed using many FRAME pallets that ship with the core Substrate repository and a template pallet that is defined in the pallets directory.

A FRAME pallet is compromised of a number of blockchain primitives:

• Storage: FRAME defines a rich set of powerful storage abstractions that makes it easy to use Substrate's efficient key-value database to manage the evolving state of a blockchain.
• Dispatchables: FRAME pallets define special types of functions that can be invoked (dispatched) from outside of the runtime in order to update its state.
• Events: Substrate uses events and errors to notify users of important changes in the runtime.
• Errors: When a dispatchable fails, it returns an error.
• Config: The Config configuration interface is used to define the types and parameters upon which a FRAME pallet depends.

Run in Docker

First, install Docker and Docker Compose.

Please use following command to run peaq-network-node parachian in the docker container connected with polkadot relaychain running in the PEAQ development environment.

PEAQ-Dev env

docker run -v peaq-dev-storage/chain-data -p 9944:9944 peaq/parachain:peaq-dev-v0.0.101 \
--parachain-id 2000 \
--chain ./node/src/chain-specs/peaq-dev-raw.json \
--base-path chain-data \
--port 30333 \
--rpc-port 9944 \
--rpc-external --rpc-cors=all \
--execution wasm \
-- \
--execution wasm \
--chain ./node/src/chain-specs/rococo-local-raw.json \
--port 30343 \
--rpc-port 9977

Krest env

docker run -v krest-storage:/chain-data -p 9944:9944 -p 9933:9933 peaq/parachain:krest-v0.0.7 \
--parachain-id 2241 \
--chain ./node/src/chain-specs/krest-raw.json \
--base-path chain-data \
--port 30333 \
--rpc-port 9944 \
--rpc-cors=all \
--execution wasm \
-- \
--execution wasm \
--chain ./node/src/chain-specs/kusama.json \
--port 30343 \
--sync warp \
--rpc-port 9977

Peaq env

docker run -v peaq-storage:/chain-data -p 9944:9944 peaq/parachain:peaq-v0.0.101 \
--parachain-id 3338 \
--chain ./node/src/chain-specs/peaq-raw.json \
--base-path chain-data \
--port 30333 \
--rpc-port 9944 \
--rpc-cors=all \
--execution wasm \
-- \
--execution wasm \
--port 30343 \
--sync warp \
--rpc-port 9977

Once you run this command, wait for a few second. Now the peaq parachian should be running in the docker container that is connected to relaychain running in PEAQ dev environament.

Run on your local machine with Docker commands

Please follow the steps given below to run peaq-network-node parachian on your local machine connected with polkadot relaychain running in the PEAQ development environment. It is assumed that you have already downloaded the source code for peaq-network-node from the git repository

1. Download the source code from the git repository:

PEAQ-Dev env

git clone --branch peaq-dev-v0.0.101 https://github.com/peaqnetwork/peaq-network-node.git

Krest env

git clone --branch krest-v0.0.7 https://github.com/peaqnetwork/peaq-network-node.git

Peaq env

git clone --branch peaq-v0.0.101 https://github.com/peaqnetwork/peaq-network-node.git

2. CD into the peaq-network-node directory:

cd peaq-network-node

3. Create the following folder:

mkdir ./.local

The folder .local is needed because that is where data such as session keys are stored for validators. Also we bind mount from the container folder /root/.local to the host machine project root folder ./.local.

4. Compile the source code:

./scripts/docker_run.sh cargo build --release

5. Now run the following script to start a peaq-network-node parachain that will connect to the polkadot relay chain running in peaq development environment:

# PEAQ-Dev env
./scripts/docker_run.sh \
./target/release/peaq-node \
--parachain-id 2000 \
--chain ./node/src/chain-specs/peaq-dev-raw.json \
--base-path chain-data \
--port 30333 \
--rpc-port 9944 \
--execution wasm \
-- \
--execution wasm \
--chain ./node/src/chain-specs/rococo-local-raw.json \
--port 30343 \
--rpc-port 9977

# Krest env
./scripts/docker_run.sh \
./target/release/peaq-node \
--parachain-id 2241 \
--chain ./node/src/chain-specs/krest-raw.json \
--base-path chain-data \
--port 30333 \
--rpc-port 9944 \
--execution wasm \
-- \
--execution wasm \
--chain ./node/src/chain-specs/kusama.json \
--port 30343 \
--pruning=16 \
--sync warp \
--rpc-port 9977

# Peaq env
./scripts/docker_run.sh \
./target/release/peaq-node \
--parachain-id 3338 \
--chain ./node/src/chain-specs/peaq-raw.json \
--base-path chain-data \
--port 30333 \
--rpc-port 9944 \
--execution wasm \
-- \
--execution wasm \
--port 30343 \
--pruning=16 \
--sync warp \
--rpc-port 9977

This command will first compile your code (if it is not already compiled), and then start a peaq-network-node parachain. The node running on your local machine will take sometime to sync up. Make sure that the parachain blocks are generated.

You can also replace the default command by appending your own. A few useful ones are as follows:

```bash
# Check whether the code is compilable
./scripts/docker_run.sh cargo check

Parachain Launch

1. Please use the peaq-node-builder to build the project

2. Create the docker images

docker build -f scripts/Dockerfile.parachain-launch -t peaqtest .

3. Please use the parachain-launch to run the local parachain