Reproducibility of research during COVID-19: examining the case of population density and the basic reproductive rate from the perspective of spatial analysis
Antonio Páez (McMaster University)
Paper desk-rejected by PLoS
ONE
Science of the Total
Environment
Landscape and Urban
Planning
Paez, A (2022) Reproducibility of Research During COVID-19: Examining the Case of Population Density and the Basic Reproductive Rate from the Perspective of Spatial Analysis. Geographical Analysis. 54(4) 860-880 (https://doi.org/10.1111/gean.12307)
The emergence of the novel SARS-CoV-2 coronavirus and the global COVID-19 pandemic in 2019 led to explosive growth in scientific research. Alas, much of the research in the literature lacks conditions to be reproducible, and recent publications on the association between population density and the basic reproductive number of SARS-CoV-2 are no exception. Relatively few papers share code and data sufficiently, which hinders not only verification but additional experimentation. In this paper, an example of reproducible research shows the potential of spatial analysis for epidemiology research during COVID-19. Transparency and openness means that independent researchers can, with only modest efforts, verify findings and use different approaches as appropriate. Given the high stakes of the situation, it is essential that scientific findings, on which good policy depends, are as robust as possible; as the empirical example shows, reproducibility is one of the keys to ensure this.
- COVID-19
- Reproducible research
- Population density
- Basic reproductive number
The emergence of the novel SARS-CoV-2 coronavirus in 2019, and the global pandemic that followed in its wake, led to an explosive growth of research around the globe. According to Fraser et al. (2021), over 125,000 COVID-19-related papers were released in the first ten months from the first confirmed case of the disease. Of these, more than 30,000 were shared in pre-print servers, the use of which also exploded in the past year (Kwon 2020; Vlasschaert, Topf, and Hiremath 2020; Añazco et al. 2021).
Given the ruinous human and economic cost of the pandemic, there has been a natural tension in the scientific community between the need to publish research results quickly and the imperative to maintain consistently high quality standards in scientific reporting; indeed, a call for maintaining the standards in published research termed the deluge of COVID-19 publications a “carnage of substandard research” (Bramstedt 2020). Part of the challenge of maintaining quality standards in published research is that, despite an abundance of recommendations and guidelines (e.g., Broggini et al. 2017; Ince, Hatton, and Graham-Cumming 2012; Ioannidis et al. 2014; Brunsdon and Comber 2020), in practice reproducibility has remained a lofty and somewhat aspirational goal (Konkol and Kray 2019; Konkol, Kray, and Pfeiffer 2019). As reported in the literature, only a woefully small proportion of published research was actually reproducible before the pandemic (Iqbal et al. 2016; Stodden, Seiler, and Ma 2018), and the situation does not appear to have changed substantially since (Sumner et al. 2020; Gustot 2020).
The push for open software and data (e.g., R. S. Bivand 2020; Arribas-Bel et al. 2021), along with more strenuous efforts towards open, reproducible research, is simply a continuation of long-standing scientific practices of independent verification. Despite the (at times disproportionate) attention that high profile scandals in science tend to elicit in the media, science as a collective endeavor is remarkable for being a self-correcting enterprise, one with built-in mechanisms and incentives to weed out erroneous ideas. Over the long term, facts tend to prevail in science. At stake is the shorter-term impacts that research may have in other spheres of economic and social life. The case of economists Reinhart and Rogoff comes to mind: by the time the inaccuracies and errors in their research were uncovered (see Herndon, Ash, and Pollin 2014), their claims about debt and economic growth had already been seized by policy-makers on both sides of the Atlantic to justify austerity policies in the aftermath of the Great Recession of 2007-20091. As later research has demonstrated, those policies cast a long shadow, and their sequels continued to be felt for years (Basu, Carney, and Kenworthy 2017).
In the context of COVID-19, a topic that has grabbed the imagination of numerous thinkers has been the prospect of life in cities after the pandemic (e.g., Florida et al. 2020); as a result, the implications of the pandemic for urban planning, design, and management are the topic of ongoing research (e.g., Sharifi and Khavarian-Garmsir 2020). The fact that the worst of the pandemic was initially felt in dense population centers such as Wuhan, Milan, Madrid, and New York, unleashed a torrent of research into the associations between density and the spread of the pandemic. The answers to some important questions hang on the results of these research efforts. For example, are lower density regions safer from the pandemic? Are de-densification policies warranted, even if just in the short term? In the longer term, will the risks of life in high density regions presage a flight from cities? And, what are the implications of the pandemic for future urban planning and practice? Over the past year, numerous papers have sought to throw light on the underlying issue of density and the pandemic; nonetheless the results, as will be detailed next, remain mixed. Further, to complicate matters, precious few of these studies appear to be sufficiently open to support independent verification.
The objective of this paper is to illustrate the importance of
reproducibility in research in the context of the flood of COVID-19
papers. For this, I focus on a recent study by Sy et al. (2021) that
examined the correlation between the basic reproductive number of
COVID-19, , and
population density. The basic reproductive number is a summary measure
of contact rates, probability of transmission of a pathogen, and
duration of infectiousness. In rough terms, it measures how many new
infections each infections begets. The paper of Sy et al. (2021) was
selected for being, in the literature examined, almost alone in
supporting reproducible research. Accordingly, I wish to be clear that
my objective in singling their work for discussion is not to malign
their efforts, but rather to demonstrate how open and reproducible
research efforts can greatly help to accelerate discovery. More
concretely, open data and open code mean that an independent researcher
can, with only modest efforts, not only verify the findings reported,
but also examine the same data from a perspective which may not have
been available to the original researchers due to differences in
disciplinary perspectives, methodological traditions, and/or training,
among other possible factors. The example, which shows consequential
changes in the conclusions reached by different analyses, should serve
as a call to researchers to redouble their efforts to increase
transparency and reproducibility in their research. In this spirit, the
present paper also aims to show how data can be packaged in
well-documented, shareable units, and code can be embedded into
self-contained documents suitable for review and independent
verification. The source for this paper is an R
Markdown document which, along with the
data package, are available in a public repository2
The concern with population density and the spread of the virus during the COVID-19 pandemic was fueled, at least in part, by dramatic scenes seen in real-time around the world from large urban centers such as Wuhan, Milan, Madrid, and New York. In theory, there are good reasons to believe that higher density could have a positive association with the transmission of a contagious virus. It has long been known that the potential for inter-personal contact is greater in regions with higher density (see for example the research on urban fields and time-geography, including Farber and Páez 2011; Moore and Brown 1970; Moore 1970). Mathematically, models of exposure and contagion indicate that higher densities can catalyze the transmission of contagious diseases (Rocklöv and Sjödin 2020; Li, Richmond, and Roehner 2018). The idea is intuitive and likely at the root of messages, by some figures in positions of authority, that regions with sparse population densities faced lower risks from the pandemic3.
As Rocklöv and Sjödin (Rocklöv and Sjödin 2020) note, however, mathematical models of contagion are valid at small-to-medium spaces (and presumably, smaller time intervals too, such as time spent in restaurants, concert halls, cruises), and the results do not necessarily transfer to larger spatial units and longer time periods. There are solid reasons for this: while in a restaurant, one can hardly avoid being in proximity to other customers. On the other hand, a person can choose to (or be forced to as a matter of policy) not go to a restaurant in the first place. Nonetheless, the idea that high density correlates with high transmission is so seemingly sensible that it is often taken for granted even at the scale of large spaces (e.g., Cruz et al. 2020; Micallef et al. 2020). In such conditions, however, there exists the possibility of behavioral adaptations, which are difficult to capture in the mechanistic framework of differential equations (or can be missing in agent-based models, e.g., Gomez et al. 2021); these adaptations, in fact, can be a key aspect of disease transmission.
A plausible behavioral adaptation during a pandemic, especially one broadcast as widely and intensely as COVID-19, is risk compensation. Risk compensation is a process whereby people adjust their behavior in response to their perception of risk (R. B. Noland 1995; Richens, Imrie, and Copas 2000; Phillips, Fyhri, and Sagberg 2011). In the case of COVID-19, Chauhan et al. (Chauhan et al. 2021) have found that perception of risks in the US varies between rural, suburban, and urban residents, with rural residents in general expressing less concern about the virus. It is possible that people who listened to the message of leaders saying that they were safe from the virus because of low density may not have taken adequate precautions. Conversely, people in dense places who could more directly observe the impact of the pandemic may have become overly cautious. Both Paez et al. (2020) and Hamidi et al. (2020) posit this mechanism (i.e., greater compliance with social distancing in denser regions) to explain the results of their analyses. The evidence available does indeed show that there were important changes in behavior with respect to mobility during the pandemic (Jamal and Paez 2020; Harris and Branion-Calles 2021; Molloy et al. 2020); furthermore, shelter in place orders may have had greater buy-in from the public in higher density regions (Feyman et al. 2020; Hamidi and Zandiatashbar 2021), and the associated behavior may have persisted beyond the duration of official social-distancing policies (Praharaj et al. 2020). In addition, there is evidence that changes in mobility correlated with the trajectory of the pandemic (A. Paez 2020; Robert B. Noland 2021). Given the potential for behavioral adaptation, the question of density becomes more nuanced: it is not just a matter of proximity, but also of human behavior, which is better studied using population-level data and models.
When it comes to population density and the spread of COVID-19, the international literature to date remains inconclusive.
On the one hand, there are studies that report positive associations between population density and various COVID-19-related outcomes. Bhadra (2021), for example, reported a moderate positive correlation between the spread of COVID-19 and population density at the district level in India, however their analysis was bivariate and did not control for other variables, such as income. Similarly, Kadi and Khelfaoui (2020) found a positive and significant correlation between number of cases and population density in cities in Algeria in a series of simple regression models (i.e., without other controls). A question in these relatively simple analyses is whether density is not a proxy for other factors. Other studies have included controls, such as Pequeno et al. (2020), a team that reported a positive association between density and cumulative counts of confirmed COVID-19 cases in state capitals in Brazil after controlling for covariates, including income, transport connectivity, and economic status. In a similar vein, Fielding-Miller et al. (2020) reported a positive relationship between the absolute number of COVID-19 deaths and population density (rate) in rural counties in the US. Roy and Ghosh (2020) used a battery of machine learning techniques to find discriminatory factors, and a positive and significant association between COVID-19 infection and death rates in US states. Wong and Li (2020) also found a positive and significant association between population density and number of confirmed COVID-19 cases in US counties, using both univariate and multivariate regressions with spatial effects. More recently, Sy et al. (2021) reported that the basic reproductive number of COVID-19 in US counties tended to increase with population density, but at a decreasing rate at higher densities.
On the flip side, a number of studies report non-significant or negative associations between population density and COVID-19 outcomes. This includes the research of Sun et al. (2020) who did not find evidence of significant correlation between population density and confirmed number of cases per day in conditions of lockdown in China. This finding echoes the results of Paez et al. (2020), who in their study of provinces in Spain reported non-significant associations between population density and infection rates in the early days of the first wave of COVID-19, and negative significant associations in the later part of the first lockdown. Similarly, Skórka et al. (2020) found zero or negative associations between population density and infection numbers/deaths by country. Fielding-Miller et al. (2020) contrast their finding about rural counties with a negative relationship between COVID-19 deaths and population density in urban counties in the US. For their part, in their investigation of doubling time, White and Hébert-Dufresne (2020) identified a negative and significant correlation between population density and doubling time in US states. Likewise, Khavarian-Garmsir, Sharifi, and Moradpour (2021) found a small negative (and significant) association between population density and COVID-19 morbidity in districts in Tehran. Finally, two of the most complete studies in the US, by Hamidi, Ewing, and Sabouri (2020) and Hamidi, Sabouri, and Ewing (2020), used an extensive set of controls to find negative and significant correlations between density and COVID-19 cases and fatalities at the level of counties in the US.
As can be seen, these studies are implemented at different scales in different regions of the world. They also use a range of techniques, from correlation analysis, to multivariate regression, spatial regressions, and machine learning techniques. This is natural and to be expected: individual researchers have only limited time and expertise. This is why reproducibility is important. To pick an example (which will be further elaborated in later sections of this paper), the study of Sy et al. (2021), hereafter referred to as SWN, would immediately grab the attention of a researcher with expertise in spatial analysis.
SWN investigated the basic reproductive number of COVID-19 in US
counties, and its association with population density, median household
income, and prevalence of private mobility. For their multivariate
analysis, SWN used mixed linear models. This is an appropriate modelling
choice: is an
interval-ratio variable that is suitably modeled using linear
regression; further, as SWN note there is a likelihood that the process
in not independent “among counties within each state, potentially due to
variable resource allocation and differing health systems across states”
(p. 3). A mixed linear model accounts for this by introducing random
components; in the case of SWN, these are random intercepts at the state
level. SWN estimated various models with different combinations of
variables, including median household income and prevalence of travel by
private transportation. These controls help to account for potential
variations in behavior: people in more affluent counties may have
greater opportunities to work from home, and use of private
transportation reduces contact with strangers. Moreover, they also
conducted various sensitivity analyses. After these efforts, SWN
concluded that there is a positive association between the basic
reproductive number and population density at the level of counties in
the US.
One salient aspect of the analysis in SWN is that the basic reproductive number can only be calculated reliably with a minimum number of cases, and a large number of counties did not meet such threshold. As researchers do, SWN made modelling decisions, in this case basing their analysis only on counties with valid observations. A modeler with expertise in spatial analysis would likely ask some of the following questions on reading SWN’s paper: how were missing counties treated? What are the implications of the spatial sampling framework used in the analysis? Is it possible to spatially interpolate the missing observations? Was there spatial residual autocorrelation in the models, or was the use of mixed models sufficient to capture spatial dependencies? These questions are relevant and their implications important. Fortunately, SWN are an example of a reasonably open, reproducible research product: their paper is accompanied by (most of) the data and (most of) the code used in the analysis. This means that an independent researcher can, with only a moderate investment of time and effort, reproduce the results in the paper, as well as ask additional questions.
Alas, reproducibility is not necessarily the norm in the relevant literature.
There are various reasons why a project can fail to be reproducible. In some cases, there might be legitimate reasons to withhold the data, perhaps due to confidentiality and privacy reasons (e.g., Lee et al. 2020). But in many other cases the data are publicly available, which in fact has commonly been the case with population-level COVID-19 information. Typically the provenance of the data is documented, but in numerous studies the data themselves are not shared (Amadu et al. 2021; Bhadra, Mukherjee, and Sarkar 2021; Cruz et al. 2020; Feng et al. 2020; Fielding-Miller, Sundaram, and Brouwer 2020; Hamidi, Ewing, and Sabouri 2020; Hamidi, Sabouri, and Ewing 2020; Inbaraj, George, and Chandrasingh 2021; Souris and Gonzalez 2020). As any researcher can attest, collecting, organizing, and preparing data for a project can take a substantial amount of time. Pointing to the sources of data, even when these sources are public, is a small step towards reproducibility-but only a very small one. Faced with the prospect of having to recreate a data set from raw sources is probably sufficient to dissuade all but the most dedicated (or stubborn) researcher from independent verification. This is true even if part of the data are shared (e.g., Wong and Li 2020). In other cases, data are shared, but the processes followed in the preparation of the data are not fully documented (Ahmad et al. 2020; Skórka et al. 2020). These processes matter, as shown by the errors in the spreadsheets of Reinhart and Rogoff (see Herndon, Ash, and Pollin 2014 for the discovery of these errors), as well as by the data of biologist Jonathan Pruitt that led to an “avalanche” of paper retractions (see Viglione 2020). Another situation is when papers share well-documented data, but fail to provide the code used in the analysis (Noury et al. 2021; Pequeno et al. 2020; Wang et al. 2021). Making code available only “on demand” (e.g., Brandtner et al. 2021) is an unnecessary barrier when most journals offer the facility to share supplemental materials online. Then there are those papers that more closely comply with reproducibility standards, and share well-documented processes and data, as well as the code used in any analyses reported (Antonio Paez et al. 2020; Feyman et al. 2020; Stephens, Chernyavskiy, and Bruns 2021; White and Hébert-Dufresne 2020; Sy, White, and Nichols 2021). Even in this case, the pressure to publish “new findings” instead of replication studies can act as a deterrent, perhaps particularly for younger researchers4.
In the following sections, the analysis of SWN is reproduced, some relevant questions from the perspective of an independent researcher with expertise in spatial analysis are asked, and the data are reanalyzed.
SWN examined the association between the basic reproductive number of
COVID-19 and population density. The basic reproductive number
is a summary
measure of contact rates, probability of transmission of a pathogen, and
duration of infectiousness. In rough terms,
measures how many
new infections each infections begets. Infectious disease outbreaks
generally tend to die out when
, and to
grow when
.
Reliable calculation of
requires a
minimum number of cases to be able to assume that there is community
transmission of the pathogen. Accordingly, SWN based their analysis only
on counties that had at least 25 cases or more at the end of the
exponential growth phase (see Fig. ). Their final sample included 1,151
counties in the US, including in Alaska, Hawaii, Puerto Rico, and island
territories. SWN used COVID-19 data collected by the New York Times and
made available (with versioning) in a GitHub repository5. For each
county, SWN assumed that the exponential growth period began one week
prior to the second daily increase in cases, and assumed that the period
of exponential growth lasted approximately 18 days.
Table reproduces the first three models of SWN (the fourth model did not
have any significant variables; see Table 1 in SWN). It is possible to
verify that the results match, with only the minor (and irrelevant)
exception of the magnitude of the coefficient for travel by private
transportation, which is due to a difference in the input (here the
variable is changed to one percent units, instead of the ten percent
units used by SWN). The mixed linear model gives random intercepts
(i.e., the intercept is a random variable), and the standard deviation
is reported in the fifth row of Table . It is useful to map the random
intercepts: as seen in Figure , other things being equal, counties in
Texas tend to have somewhat lower values of
(i.e., a negative
random intercept), whereas counties in South Dakota tend to have higher
values of
. The
key of the analysis, after extensive sensitivity analysis, is a robust
finding that population density has a positive association with the
basic reproductive number. But does it?
Model 1 |
Model 2 |
Model 3 |
||||
---|---|---|---|---|---|---|
Variable | beta | 95% CI | beta | 95% CI | beta | 95% CI |
Intercept | 2.274 | \[2.167, 2.381\] | 3.347 | \[2.676, 4.018\] | 3.386 | \[2.614, 4.157\] |
Log of population density | 0.162 | \[0.133, 0.191\] | 0.145 | \[0.115, 0.176\] | 0.147 | \[0.113, 0.18\] |
Percent of private transportation | -0.013 | \[-0.02, -0.005\] | -0.013 | \[-0.021, -0.005\] | ||
Median household income (\$10,000) | -0.003 | \[-0.033, 0.026\] | ||||
Standard deviation (Intercept) | 0.166 | \[0.108, 0.254\] | 0.136 | \[0.081, 0.229\] | 0.137 | \[0.081, 0.232\] |
Within-group standard error | 0.665 | \[0.638, 0.693\] | 0.665 | \[0.638, 0.693\] | 0.665 | \[0.638, 0.694\] |
The preceding section shows that thanks to the availability of code and
data, it is possible to verify the results reported by SWN. As noted
earlier, though, an independent researcher might have wondered about the
implications of the spatial sampling procedure used by SWN. The decision
to use a sample of counties with reliable basic reproductive numbers,
although apparently sensible, results in a non-random spatial sampling
scheme. Turning our attention back to Figure , we form the impression
that many counties without reliable values of
are in more
rural, less dense parts of the United States. This impression is
reinforced when we overlay the boundaries of urban areas with population
greater than 50,000 on the counties with valid values of
(see Figure ).
The fact that
could not be accurately computed in many counties without large urban
areas does not mean that there was no transmission of the virus: it
simply means that we do not know with sufficient precision to what
extent that was the case. The low number of cases may be related to low
population and/or low population density. This is intriguing, to say the
least: by excluding cases based on the ability to calculate
we are
potentially selecting the sample in a non-random way.
A problematic issue with non-random sample selection is that parameter estimates can become unreliable, and numerous techniques have been developed to address this. A model useful for sample selection problems is Heckman’s selection model (see Maddala 1983). The selection model is in fact a system of two equations, as follows:
where
is a latent variable for the sample selection process, and
is the latent outcome. Vectors
and
are
explanatory variables (with the possibility that
).
Both equations include random terms (i.e.,
and
).
The first equation is designed to model the probability of sampling,
and the second equation the outcome of interest (say
). The random
terms are jointly distributed and correlated with parameter
.
What the analyst observes is the following:
and:
In other words, the outcome of interest is observed only for certain
cases
(,
i.e., for sampled observations). The probability of sampling depends on
. For the
cases observed, the outcome
depends
on
.
A sample selection model is estimated using the same selection of
variables as SWN Model 3. This is Sample Selection Model 1 in Table .
The first thing to notice about this model is that the sample selection
process and the outcome are correlated
(
with 5% of confidence). The selection equation indicates that the
probability of a county to be in the sample increases with population
density (but at a decreasing rate due to the log-transformation), when
travel by private modes is more prevalent, and as median household
income in the county is higher. This is in line with the impression made
by Figure that counties with reliable values of
tended to be
those with larger urban centers. Once that the selection probabilities
are accounted for in the model, several things happen with the outcomes
model. First, the coefficient for population density is still positive,
but the magnitude changes: in effect, it appears that the effect of
density is more pronounced than what SWN Model 3 indicated. The
coefficient for percent of private transportation changes signs. And the
coefficient for median household income is now significant.
The second model in Table (Selection Model 2) changes the way the
variables are entered into the model. The log-transformation of density
in SWN and Selection Model 1 assumes that the association between
density and is
monotonically increasing (if the sign of the coefficient is positive) or
decreasing (if the sign of the coefficient is negative). There are some
indications that the relationship may actually not be monotonical. For
example, Paez et al. (2020) found a positive (if non-significant)
relationship between density and incidence of COVID-19 in the provinces
of Spain at the beginning of the pandemic. This changed to a negative
(and significant) relationship during the lockdown. In the case of the
US, Fielding-Miller et al. (2020) found that the association between
COVID-19 deaths and population density was positive in rural counties,
but negative in urban counties. A variable transformation that allows
for non-monotonic changes in the relationship is the square of the
density.
As seen in the table, Selection Model 2 replaces the log-transformation
of population density with a quadratic expansion. The results of this
analysis indicate that with this variable transformation, the selection
and outcome processes are still correlated
(
with 5% of confidence). But a few other interesting things emerge. When
we examine the outcomes model, we see that the quadratic expansion has a
positive coefficient for the first order term, but a negative
coefficient for the second order term. This indicates that
initially tends
to increase as density grows, but only up to a point, after which the
negative second term (which grows more rapidly due to the square),
becomes increasingly dominant. Secondly, the sign of the coefficient for
travel by private transportation becomes negative again. This, of
course, makes more sense than the positive sign of Selection Model 1: if
people tend to travel in private transportation, the potential for
contact should be lower instead of higher. And finally median household
income is no longer significant, similar to SWN Model 3.
Selection Model 1 |
Selection Model 2 |
|||
---|---|---|---|---|
Variable | ![\beta](https://latex.codecogs.com/png.latex?%5Cbeta "\beta") | 95% CI | ![\beta](https://latex.codecogs.com/png.latex?%5Cbeta "\beta") | 95% CI |
Sample Selection Model | ||||
Intercept | -2.237 | \[-3.109, -1.365\] | -7.339 | \[-8.381, -6.297\] |
Log of population density | 0.385 | \[0.352, 0.418\] | ||
Density (1,000 per sq.km) | 2.484 | \[2.13, 2.838\] | ||
Density squared | -0.387 | \[-0.473, -0.3\] | ||
Percent of private transportation | 0.025 | \[0.016, 0.034\] | 0.057 | \[0.046, 0.067\] |
Median household income (10,000) | 0.202 | \[0.168, 0.235\] | 0.32 | \[0.283, 0.357\] |
Outcome Model | ||||
Intercept | 0.605 | \[-0.257, 1.466\] | 2.784 | \[1.652, 3.915\] |
Log of population density | 0.39 | \[0.354, 0.426\] | ||
Density (1,000 per sq.km) | 0.758 | \[0.509, 1.008\] | ||
Density squared | -0.132 | \[-0.187, -0.077\] | ||
Percent of private transportation | 0.01 | \[0.001, 0.018\] | -0.011 | \[-0.021, -0.001\] |
Median household income (\$10,000) | 0.126 | \[0.094, 0.159\] | 0.002 | \[-0.033, 0.037\] |
![\sigma](https://latex.codecogs.com/png.latex?%5Csigma "\sigma") | 0.954 | \[0.904, 1.003\] | 0.684 | \[0.652, 0.716\] |
![\rho](https://latex.codecogs.com/png.latex?%5Crho "\rho") | 0.971 | \[0.961, 0.98\] | -0.199 | \[-0.377, -0.022\] |
It is worth at this point to recall Cressie’s dictum about modelling: “[w]hat is one person’s mean structure could be another person’s correlation structure” (Cressie 1989, 201). There are almost always multiple ways to approach a modelling situation, as lively illustrated by a recent paper that reports the results of a crowdsourced modelling experiment (Schweinsberg et al. 2021). In the present case, we would argue that spatial sampling is an important aspect of the modeling process. Importantly, by adopting high reproducibility standards, SWN made a valuable contribution to the collective enterprise of seeking knowledge. Their effort, and subsequent efforts to validate and expand on their work, can potentially contribute to provide clarity to ongoing conversations about the relevance of density and the spread of COVID-19.
In particular, it is noteworthy that a sample selection model with a different variable transformation does not lend support to the thesis that higher density is always associated with a greater risk of spread of the virus [in Wong and Li’s words, “‘Density is destiny’ is probably an overstatement”; -Wong and Li (2020)]. At the same time, the results presented here also stand in contrast to the findings of Hamidi et al., who found that higher density was either not significantly associated with the rate of the virus in a cross-sectional study (Hamidi, Sabouri, and Ewing 2020), or was negatively associated with it in a longitudinal setting [Hamidi, Ewing, and Sabouri (2020). In this sense, the conclusion that density does not aggravate the pandemic may have been somewhat premature; instead, reanalysis of the data of SWN suggests that Fielding-Miller et al. (2020) might be onto something with respect to the difference between rural and urban counties. More generally, there is no doubt that in population-level studies density is indicative of proximity, but it also potentially is a proxy for adaptive behavior. And it is possible that the determining factor during COVID-19, at least in the US, has been variations in perceptions of the risks associated with contagion (Chauhan et al. 2021), and subsequent compensations in behavior in more and less dense regions.
The tension between the need to publish research potentially useful in dealing with a global pandemic, and a potential “carnage of substandard research” (Bramstedt 2020), highlights the importance of efforts to maintain the quality of scientific outputs during COVID-19. An important part of quality control is the ability of independent researchers to verify and examine the results of materials published in the literature. As previous research illustrates, reproducibility in scientific research remains an important but elusive goal (e.g., Iqbal et al. 2016; Stodden, Seiler, and Ma 2018; Sumner et al. 2020; Gustot 2020). This idea is reinforced by the review conducted for this paper in the context of research about population density and the spread of COVID-19.
Taking one recent example from the literature [Sy et al., Sy, White, and Nichols (2021); SWN], the present paper illustrates the importance of good reproducibility practices. Sharing data and code can catalyze research, by allowing independent verification of findings, as well as additional research. After verifying the results of SWN, experiments with sample selection models and variations in the definition of model inputs, lead to an important reappraisal of the conclusion that high density is associated with greater spread of the virus. Instead, the possibility of a non-monotonical relationship between population density and contagion is raised. I do not claim that the analysis presented here is the last word on the topic of density and the spread of COVID-19, and there is always the possibility that someone else will be better equipped to analyze these data with greater competence. By opening up the analysis, documenting the way data were pre-processed, and by sharing analysis ready data, my hope would be that others will be able to discover the limitations of my own analysis and improve on it, as appropriate.
More generally, my hope is that the research of Sy et al. (2021), the present paper, and similar reproducible publications, will continue to encourage others to adopt higher reproducibility standards in their research.
The analysis reported in this paper was conducted in the R
computing
statistical language (R Core Team 2021). The source document is an
Rmarkdown document (Xie, Allaire, and Grolemund 2018; Xie, Dervieux, and
Riederer 2020) processed using knitr
(Xie 2015, 2014). The following
packages were used in the analysis, and I wish to acknowledge their
creators for their generous efforts: adespatial
(Dray et al. 2021),
censReg
(Henningsen 2020), dplyr
(Wickham et al. 2021), forcats
(Wickham 2021a), ggplot2
(Wickham 2016), gmm
(Chaussé 2010),
kableExtra
(Zhu 2021), Matrix
(Bates and Maechler 2021), maxLik
(Henningsen and Toomet 2011), miscTools
(Henningsen and Toomet 2019),
mvtnorm
(Genz and Bretz 2009), nlme
(Pinheiro, Bates, and R-core
2021), patchwork
(Pedersen 2020), purrr
(Henry and Wickham 2020),
readr
(Wickham and Hester 2021), sampleSelection
(Toomet and
Henningsen 2008), sandwich
(Zeileis, Köll, and Graham 2020; Zeileis
2004, 2006), scico
(Pedersen and Crameri 2020), sf
(E. Pebesma
2018), sp
(E. J. Pebesma and Bivand 2005; R. S. Bivand, Pebesma, and
Gomez-Rubio 2013a), spatialprobit
(Wilhelm and de Matos 2015),
spData
(R. Bivand, Nowosad, and Lovelace 2021), spdep
(R. Bivand and
Wong 2018; R. S. Bivand, Pebesma, and Gomez-Rubio 2013b), stringr
[R-stringr], tibble
(Müller and Wickham 2021), tidycensus
(Walker
and Herman 2021), tidyr
(Wickham 2021b), tidyverse
(Wickham et al.
2019), tmvtnorm
(Manjunath B G <bgmanjunath@gmail.com> 2015),
units
(E. Pebesma, Mailund, and Hiebert 2016). This research was not
supported by Canada’s Research Councils.
Ahmad, Khansa, Sebhat Erqou, Nishant Shah, Umair Nazir, Alan R. Morrison, Gaurav Choudhary, and Wen-Chih Wu. 2020. “Association of Poor Housing Conditions with COVID-19 Incidence and Mortality Across US Counties.” Journal Article. PLOS ONE 15 (11): e0241327. https://doi.org/10.1371/journal.pone.0241327.
Amadu, Iddrisu, Bright Opoku Ahinkorah, Abdul-Rahaman Afitiri, Abdul-Aziz Seidu, Edward Kwabena Ameyaw, John Elvis Hagan, Eric Duku, and Simon Appah Aram. 2021. “Assessing Sub-Regional-Specific Strengths of Healthcare Systems Associated with COVID-19 Prevalence, Deaths and Recoveries in Africa.” Journal Article. PLOS ONE 16 (3): e0247274. https://doi.org/10.1371/journal.pone.0247274.
Añazco, Diego, Bryan Nicolalde, Isabel Espinosa, Jose Camacho, Mariam Mushtaq, Jimena Gimenez, and Enrique Teran. 2021. “Publication Rate and Citation Counts for Preprints Released During the COVID-19 Pandemic: The Good, the Bad and the Ugly.” Journal Article. PeerJ 9: e10927. https://doi.org/10.7717/peerj.10927.
Arribas-Bel, Daniel, Mark Green, Francisco Rowe, and Alex Singleton. 2021. “Open Data Products: A Framework for Creating Valuable Analysis-Ready Data.” Journal Article. Journal of Geographical Systems.
Basu, Sanjay, Megan A. Carney, and Nora J. Kenworthy. 2017. “Ten Years After the Financial Crisis: The Long Reach of Austerity and Its Global Impacts on Health.” Journal Article. Social Science & Medicine 187: 203–7. https://doi.org/10.1016/j.socscimed.2017.06.026.
Bates, Douglas, and Martin Maechler. 2021. Matrix: Sparse and Dense Matrix Classes and Methods. http://Matrix.R-forge.R-project.org/.
Bhadra, Arunava, Arindam Mukherjee, and Kabita Sarkar. 2021. “Impact of Population Density on Covid-19 Infected and Mortality Rate in India.” Journal Article. Modeling Earth Systems and Environment 7 (1): 623–29. https://doi.org/10.1007/s40808-020-00984-7.
Bivand, Roger S. 2020. “Progress in the r Ecosystem for Representing and Handling Spatial Data.” Journal Article. Journal of Geographical Systems. https://doi.org/10.1007/s10109-020-00336-0.
Bivand, Roger S., Edzer Pebesma, and Virgilio Gomez-Rubio. 2013a. Applied Spatial Data Analysis with R, Second Edition. Springer, NY. https://asdar-book.org/.
———. 2013b. Applied Spatial Data Analysis with R, Second Edition. Springer, NY. https://asdar-book.org/.
Bivand, Roger, Jakub Nowosad, and Robin Lovelace. 2021. spData: Datasets for Spatial Analysis. https://nowosad.github.io/spData/.
Bivand, Roger, and David W. S. Wong. 2018. “Comparing Implementations of Global and Local Indicators of Spatial Association.” TEST 27 (3): 716–48. https://doi.org/10.1007/s11749-018-0599-x.
Bramstedt, Katrina A. 2020. “The Carnage of Substandard Research During the COVID-19 Pandemic: A Call for Quality.” Journal Article. Journal of Medical Ethics 46 (12): 803–7. https://doi.org/10.1136/medethics-2020-106494.
Brandtner, Christof, Luís M. A. Bettencourt, Marc G. Berman, and Andrew J. Stier. 2021. “Creatures of the State? Metropolitan Counties Compensated for State Inaction in Initial u.s. Response to COVID-19 Pandemic.” Journal Article. PLOS ONE 16 (2): e0246249. https://doi.org/10.1371/journal.pone.0246249.
Broggini, F., J. Dellinger, S. Fomel, and Y. Liu. 2017. “Reproducible Research: Geophysics Papers of the Future - Introduction.” Journal Article. Geophysics 82 (6). https://doi.org/10.1190/geo2017-0918-spseintro.1.
Brunsdon, Chris, and Alexis Comber. 2020. “Opening Practice: Supporting Reproducibility and Critical Spatial Data Science.” Journal Article. Journal of Geographical Systems. https://doi.org/10.1007/s10109-020-00334-2.
Chauhan, Rishabh Singh, Denise Capasso da Silva, Deborah Salon, Ali Shamshiripour, Ehsan Rahimi, Uttara Sutradhar, Sara Khoeini, Abolfazl (Kouros) Mohammadian, Sybil Derrible, and Ram Pendyala. 2021. “COVID-19 Related Attitudes and Risk Perceptions Across Urban, Rural, and Suburban Areas in the United States.” Findings, June. https://doi.org/10.32866/001c.23714.
Chaussé, Pierre. 2010. “Computing Generalized Method of Moments and Generalized Empirical Likelihood with R.” Journal of Statistical Software 34 (11): 1–35. https://www.jstatsoft.org/v34/i11/.
Cressie, Noel. 1989. “Geostatistics.” Journal Article. The American Statistician 43 (4): 197. https://doi.org/10.2307/2685361.
Cruz, Christian Joy Pattawi, Rachel Ganly, Zilin Li, and Stuart Gietel-Basten. 2020. “Exploring the Young Demographic Profile of COVID-19 Cases in Hong Kong: Evidence from Migration and Travel History Data.” Journal Article. PLOS ONE 15 (6): e0235306. https://doi.org/10.1371/journal.pone.0235306.
Dray, Stéphane, David Bauman, Guillaume Blanchet, Daniel Borcard, Sylvie Clappe, Guillaume Guenard, Thibaut Jombart, et al. 2021. Adespatial: Multivariate Multiscale Spatial Analysis. https://github.com/sdray/adespatial.
Farber, Steven, and Antonio Páez. 2011. “Running to Stay in Place: The Time-Use Implications of Automobile Oriented Land-Use and Travel.” Journal Article. Journal of Transport Geography 19 (4): 782–93. https://doi.org/10.1016/j.jtrangeo.2010.09.008.
Feng, Yongjiu, Qingmei Li, Xiaohua Tong, Rong Wang, Shuting Zhai, Chen Gao, Zhenkun Lei, et al. 2020. “Spatiotemporal Spread Pattern of the COVID-19 Cases in China.” Journal Article. PLOS ONE 15 (12): e0244351. https://doi.org/10.1371/journal.pone.0244351.
Feyman, Yevgeniy, Jacob Bor, Julia Raifman, and Kevin N. Griffith. 2020. “Effectiveness of COVID-19 Shelter-in-Place Orders Varied by State.” Journal Article. PLOS ONE 15 (12): e0245008. https://doi.org/10.1371/journal.pone.0245008.
Florida, R, E Glaeser, MM Sharif, K Bedi, TJ Campanella, CH Chee, D Doctoroff, B Katz, R Katz, and J Kotkin. 2020. “How Life in Our Cities Will Look After the Coronavirus Pandemic.” Journal Article. Foreign Policy 1. https://foreignpolicy.com/2020/05/01/future-of-cities-urban-life-after-coronavirus-pandemic/.
Fraser, Nicholas, Liam Brierley, Gautam Dey, Jessica K. Polka, Máté Pálfy, Federico Nanni, and Jonathon Alexis Coates. 2021. “The Evolving Role of Preprints in the Dissemination of COVID-19 Research and Their Impact on the Science Communication Landscape.” Journal Article. PLOS Biology 19 (4): e3000959. https://doi.org/10.1371/journal.pbio.3000959.
Genz, Alan, and Frank Bretz. 2009. Computation of Multivariate Normal and t Probabilities. Lecture Notes in Statistics. Heidelberg: Springer-Verlag.
Getis, A., and D. A. Griffith. 2002. “Comparative Spatial Filtering in Regression Analysis.” Journal Article. Geographical Analysis 34 (2): 130–40.
Gomez, Jonatan, Jeisson Prieto, Elizabeth Leon, and Arles Rodríguez. 2021. “INFEKTA—an Agent-Based Model for Transmission of Infectious Diseases: The COVID-19 Case in Bogotá, Colombia.” Journal Article. PLOS ONE 16 (2): e0245787. https://doi.org/10.1371/journal.pone.0245787.
Griffith, D. A. 2000. “A Linear Regression Solution to the Spatial Autocorrelation Problem.” Journal Article. Journal of Geographical Systems 2 (2): 141–56.
———. 2004. “A Spatial Filtering Specification for the Autologistic Model.” Journal Article. Environment and Planning A 36 (10): 1791–811. [ISI:000224552100007 C:/Papers/Environment and Planning A/Environment and Planning A (2004) 36 (10) 791-181.pdf](https://ISI:000224552100007 C:/Papers/Environment and Planning A/Environment and Planning A (2004) 36 (10) 791-181.pdf).
Gustot, T. 2020. “Quality and Reproducibility During the COVID-19 Pandemic.” Journal Article. JHEP Rep 2 (4): 100141. https://doi.org/10.1016/j.jhepr.2020.100141.
Hamidi, Shima, Reid Ewing, and Sadegh Sabouri. 2020. “Longitudinal Analyses of the Relationship Between Development Density and the COVID-19 Morbidity and Mortality Rates: Early Evidence from 1,165 Metropolitan Counties in the United States.” Journal Article. Health & Place 64: 102378. https://doi.org/10.1016/j.healthplace.2020.102378.
Hamidi, Shima, Sadegh Sabouri, and Reid Ewing. 2020. “Does Density Aggravate the COVID-19 Pandemic?” Journal Article. Journal of the American Planning Association 86 (4): 495–509. https://doi.org/10.1080/01944363.2020.1777891.
Hamidi, Shima, and Ahoura Zandiatashbar. 2021. “Compact Development and Adherence to Stay-at-Home Order During the COVID-19 Pandemic: A Longitudinal Investigation in the United States.” Journal Article. Landscape and Urban Planning 205: 103952. https://doi.org/https://doi.org/10.1016/j.landurbplan.2020.103952.
Harris, M. Anne, and Michael Branion-Calles. 2021. “Changes in Commute Mode Attributed to COVID-19 Risk in Canadian National Survey Data.” Findings, February. https://doi.org/10.32866/001c.19088.
Henningsen, Arne. 2020. censReg: Censored Regression (Tobit) Models. http://www.sampleSelection.org.
Henningsen, Arne, and Ott Toomet. 2011. “maxLik: A Package for Maximum Likelihood Estimation in R.” Computational Statistics 26 (3): 443–58. https://doi.org/10.1007/s00180-010-0217-1.
———. 2019. miscTools: Miscellaneous Tools and Utilities. http://www.micEcon.org.
Henry, Lionel, and Hadley Wickham. 2020. Purrr: Functional Programming Tools. https://CRAN.R-project.org/package=purrr.
Herndon, T., M. Ash, and R. Pollin. 2014. “Does High Public Debt Consistently Stifle Economic Growth? A Critique of Reinhart and Rogoff.” Journal Article. Cambridge Journal of Economics 38 (2): 257–79. https://doi.org/10.1093/cje/bet075.
Inbaraj, Leeberk Raja, Carolin Elizabeth George, and Sindhulina Chandrasingh. 2021. “Seroprevalence of COVID-19 Infection in a Rural District of South India: A Population-Based Seroepidemiological Study.” Journal Article. PLOS ONE 16 (3): e0249247. https://doi.org/10.1371/journal.pone.0249247.
Ince, D. C., L. Hatton, and J. Graham-Cumming. 2012. “The Case for Open Computer Programs.” Journal Article. Nature 482 (7386): 485–88. https://doi.org/10.1038/nature10836.
Ioannidis, J. P. A., S. Greenland, M. A. Hlatky, M. J. Khoury, M. R. Macleod, D. Moher, K. F. Schulz, and R. Tibshirani. 2014. “Increasing Value and Reducing Waste in Research Design, Conduct, and Analysis.” Journal Article. Lancet 383 (9912): 166–75. https://doi.org/10.1016/s0140-6736(13)62227-8.
Iqbal, S. A., J. D. Wallach, M. J. Khoury, S. D. Schully, and J. P. A. Ioannidis. 2016. “Reproducible Research Practices and Transparency Across the Biomedical Literature.” Journal Article. Plos Biology 14 (1). https://doi.org/10.1371/journal.pbio.1002333.
Jamal, Shaila, and Antonio Paez. 2020. “Changes in Trip-Making Frequency by Mode During COVID-19.” Findings, November. https://doi.org/10.32866/001c.17977.
Kadi, Nadjat, and Mounia Khelfaoui. 2020. “Population Density, a Factor in the Spread of COVID-19 in Algeria: Statistic Study.” Journal Article. Bulletin of the National Research Centre 44 (1). https://doi.org/10.1186/s42269-020-00393-x.
Khavarian-Garmsir, Amir Reza, Ayyoob Sharifi, and Nabi Moradpour. 2021. “Are High-Density Districts More Vulnerable to the COVID-19 Pandemic?” Journal Article. Sustainable Cities and Society 70: 102911. https://doi.org/10.1016/j.scs.2021.102911.
Konkol, M., and C. Kray. 2019. “In-Depth Examination of Spatiotemporal Figures in Open Reproducible Research.” Journal Article. Cartography and Geographic Information Science 46 (5): 412–27. https://doi.org/10.1080/15230406.2018.1512421.
Konkol, M., C. Kray, and M. Pfeiffer. 2019. “Computational Reproducibility in Geoscientific Papers: Insights from a Series of Studies with Geoscientists and a Reproduction Study.” Journal Article. International Journal of Geographical Information Science 33 (2): 408–29. https://doi.org/10.1080/13658816.2018.1508687.
Kwon, Diana. 2020. “How Swamped Preprint Servers Are Blocking Bad Coronavirus Research.” Journal Article. Nature 581 (7807): 130–32.
Lee, Minha, Jun Zhao, Qianqian Sun, Yixuan Pan, Weiyi Zhou, Chenfeng Xiong, and Lei Zhang. 2020. “Human Mobility Trends During the Early Stage of the COVID-19 Pandemic in the United States.” Journal Article. PLOS ONE 15 (11): e0241468. https://doi.org/10.1371/journal.pone.0241468.
Li, Ruiqi, Peter Richmond, and Bertrand M. Roehner. 2018. “Effect of Population Density on Epidemics.” Journal Article. Physica A: Statistical Mechanics and Its Applications 510: 713–24. https://doi.org/10.1016/j.physa.2018.07.025.
Maddala, G. S. 1983. Limited-Dependent and Qualitative Variables in Econometrics. Book. Cambridge: Cambridge University Press.
Manjunath B G <bgmanjunath@gmail.com>, Stefan Wilhelm with contributions from. 2015. Tmvtnorm: Truncated Multivariate Normal and Student t Distribution. http://www.r-project.org.
Micallef, Sarah, Tonio V. Piscopo, Ramon Casha, Denise Borg, Chantal Vella, Maria-Alessandra Zammit, Janice Borg, et al. 2020. “The First Wave of COVID-19 in Malta; a National Cross-Sectional Study.” Journal Article. PLOS ONE 15 (10): e0239389. https://doi.org/10.1371/journal.pone.0239389.
Molloy, Joseph, Christopher Tchervenkov, Beat Hintermann, and Kay W. Axhausen. 2020. “Tracing the Sars-CoV-2 Impact: The First Month in Switzerland.” Findings, May. https://doi.org/10.32866/001c.12903.
Moore, E. G. 1970. “Some Spatial Properties of Urban Contact Fields.” Journal Article. Geographical Analysis 2 (4): 376–86.
Moore, E. G., and L. A. Brown. 1970. “Urban Acquaintance Fields: An Evaluation of a Spatial Model.” Journal Article. Environment and Planning 2 (4): 443–54. http://www.envplan.com/abstract.cgi?id=a020443.
Müller, Kirill, and Hadley Wickham. 2021. Tibble: Simple Data Frames. https://CRAN.R-project.org/package=tibble.
Noland, R. B. 1995. “PERCEIVED RISK AND MODAL CHOICE - RISK COMPENSATION IN TRANSPORTATION SYSTEM.” Journal Article. Accident Analysis and Prevention 27 (4): 503–21. https://doi.org/10.1016/0001-4575(94)00087-3.
Noland, Robert B. 2021. “Mobility and the Effective Reproduction Rate of COVID-19.” Journal Article. Journal of Transport & Health 20: 101016. https://doi.org/https://doi.org/10.1016/j.jth.2021.101016.
Noury, Abdul, Abel François, Olivier Gergaud, and Alexandre Garel. 2021. “How Does COVID-19 Affect Electoral Participation? Evidence from the French Municipal Elections.” Journal Article. PLOS ONE 16 (2): e0247026. https://doi.org/10.1371/journal.pone.0247026.
Paez, A. 2020. “Using Google Community Mobility Reports to Investigate the Incidence of COVID-19 in the United States.” Journal Article. Findings. https://doi.org/https://doi.org/10.32866/001c.12976.
Paez, Antonio. 2019. “Using Spatial Filters and Exploratory Data Analysis to Enhance Regression Models of Spatial Data.” Journal Article. Geographical Analysis 51 (3): 314–38. https://doi.org/10.1111/gean.12180.
Paez, Antonio, Fernando A. Lopez, Tatiane Menezes, Renata Cavalcanti, and Maira Galdino da Rocha Pitta. 2020. “A Spatio-Temporal Analysis of the Environmental Correlates of COVID-19 Incidence in Spain.” Journal Article. Geographical Analysis n/a (n/a). https://doi.org/10.1111/gean.12241.
Pebesma, Edzer. 2018. “Simple Features for R: Standardized Support for Spatial Vector Data.” The R Journal 10 (1): 439–46. https://doi.org/10.32614/RJ-2018-009.
Pebesma, Edzer J., and Roger S. Bivand. 2005. “Classes and Methods for Spatial Data in R.” R News 5 (2): 9–13. https://CRAN.R-project.org/doc/Rnews/.
Pebesma, Edzer, Thomas Mailund, and James Hiebert. 2016. “Measurement Units in R.” R Journal 8 (2): 486–94. https://doi.org/10.32614/RJ-2016-061.
Pedersen, Thomas Lin. 2020. Patchwork: The Composer of Plots. https://CRAN.R-project.org/package=patchwork.
Pedersen, Thomas Lin, and Fabio Crameri. 2020. Scico: Colour Palettes Based on the Scientific Colour-Maps. https://github.com/thomasp85/scico.
Pequeno, Pedro, Bruna Mendel, Clarissa Rosa, Mariane Bosholn, Jorge Luiz Souza, Fabricio Baccaro, Reinaldo Barbosa, and William Magnusson. 2020. “Air Transportation, Population Density and Temperature Predict the Spread of COVID-19 in Brazil.” Journal Article. PeerJ 8: e9322. https://doi.org/10.7717/peerj.9322.
Phillips, R. O., A. Fyhri, and F. Sagberg. 2011. “Risk Compensation and Bicycle Helmets.” Journal Article. Risk Analysis 31 (8): 1187–95. https://doi.org/10.1111/j.1539-6924.2011.01589.x.
Pinheiro, José, Douglas Bates, and R-core. 2021. Nlme: Linear and Nonlinear Mixed Effects Models. https://svn.r-project.org/R-packages/trunk/nlme/.
Praharaj, Sarbeswar, David King, Christopher Pettit, and Elizabeth Wentz. 2020. “Using Aggregated Mobility Data to Measure the Effect of COVID-19 Policies on Mobility Changes in Sydney, London, Phoenix, and Pune.” Findings, October. https://doi.org/10.32866/001c.17590.
R Core Team. 2021. R: A Language and Environment for Statistical Computing. Vienna, Austria: R Foundation for Statistical Computing. https://www.R-project.org/.
Richens, J., J. Imrie, and A. Copas. 2000. “Condoms and Seat Belts: The Parallels and the Lessons.” Journal Article. Lancet 355 (9201): 400–403. https://doi.org/10.1016/s0140-6736(99)09109-6.
Rocklöv, Joacim, and Henrik Sjödin. 2020. “High Population Densities Catalyse the Spread of COVID-19.” Journal Article. Journal of Travel Medicine 27 (3). https://doi.org/10.1093/jtm/taaa038.
Roy, Satyaki, and Preetam Ghosh. 2020. “Factors Affecting COVID-19 Infected and Death Rates Inform Lockdown-Related Policymaking.” Journal Article. PLOS ONE 15 (10): e0241165. https://doi.org/10.1371/journal.pone.0241165.
Schweinsberg, Martin, Michael Feldman, Nicola Staub, Olmo R. van den Akker, Robbie C. M. van Aert, Marcel A. L. M. van Assen, Yang Liu, et al. 2021. “Same Data, Different Conclusions: Radical Dispersion in Empirical Results When Independent Analysts Operationalize and Test the Same Hypothesis.” Organizational Behavior and Human Decision Processes 165: 228–49. https://doi.org/https://doi.org/10.1016/j.obhdp.2021.02.003.
Sharifi, Ayyoob, and Amir Reza Khavarian-Garmsir. 2020. “The COVID-19 Pandemic: Impacts on Cities and Major Lessons for Urban Planning, Design, and Management.” Journal Article. Science of The Total Environment 749: 142391. https://doi.org/https://doi.org/10.1016/j.scitotenv.2020.142391.
Skórka, Piotr, Beata Grzywacz, Dawid Moroń, and Magdalena Lenda. 2020. “The Macroecology of the COVID-19 Pandemic in the Anthropocene.” Journal Article. PLOS ONE 15 (7): e0236856. https://doi.org/10.1371/journal.pone.0236856.
Souris, Marc, and Jean-Paul Gonzalez. 2020. “COVID-19: Spatial Analysis of Hospital Case-Fatality Rate in France.” Journal Article. PLOS ONE 15 (12): e0243606. https://doi.org/10.1371/journal.pone.0243606.
Stephens, Kenton E., Pavel Chernyavskiy, and Danielle R. Bruns. 2021. “Impact of Altitude on COVID-19 Infection and Death in the United States: A Modeling and Observational Study.” Journal Article. PLOS ONE 16 (1): e0245055. https://doi.org/10.1371/journal.pone.0245055.
Stodden, V., J. Seiler, and Z. K. Ma. 2018. “An Empirical Analysis of Journal Policy Effectiveness for Computational Reproducibility.” Journal Article. Proceedings of the National Academy of Sciences of the United States of America 115 (11): 2584–89. https://doi.org/10.1073/pnas.1708290115.
Sumner, Josh, Leah Haynes, Sarah Nathan, Cynthia Hudson-Vitale, and Leslie D. McIntosh. 2020. “Reproducibility and Reporting Practices in COVID-19 Preprint Manuscripts.” Journal Article. medRxiv, 2020.03.24.20042796. https://doi.org/10.1101/2020.03.24.20042796.
Sun, Zhibin, Hui Zhang, Yifei Yang, Hua Wan, and Yixiang Wang. 2020. “Impacts of Geographic Factors and Population Density on the COVID-19 Spreading Under the Lockdown Policies of China.” Journal Article. Science of The Total Environment 746: 141347. https://doi.org/10.1016/j.scitotenv.2020.141347.
Sy, Karla Therese L., Laura F. White, and Brooke E. Nichols. 2021. “Population Density and Basic Reproductive Number of COVID-19 Across United States Counties.” Journal Article. PLOS ONE 16 (4): e0249271. https://doi.org/10.1371/journal.pone.0249271.
Toomet, Ott, and Arne Henningsen. 2008. “Sample Selection Models in R: Package sampleSelection.” Journal of Statistical Software 27 (7). https://www.jstatsoft.org/v27/i07/.
Viglione, Giuliana. 2020. “’Avalanche’of Spider-Paper Retractions Shakes Behavioural-Ecology Community.” Nature 578 (7794): 199–201.
Vlasschaert, Caitlyn, Joel M. Topf, and Swapnil Hiremath. 2020. “Proliferation of Papers and Preprints During the Coronavirus Disease 2019 Pandemic: Progress or Problems with Peer Review?” Journal Article. Advances in Chronic Kidney Disease 27 (5): 418–26. https://doi.org/10.1053/j.ackd.2020.08.003.
Walker, Kyle, and Matt Herman. 2021. Tidycensus: Load US Census Boundary and Attribute Data as Tidyverse and Sf-Ready Data Frames. https://github.com/walkerke/tidycensus.
Wang, Fangxiong, Ziqian Tan, Zaihui Yu, Siqi Yao, and Changfeng Guo. 2021. “Transmission and Control Pressure Analysis of the COVID-19 Epidemic Situation Using Multisource Spatio-Temporal Big Data.” Journal Article. PLOS ONE 16 (3): e0249145. https://doi.org/10.1371/journal.pone.0249145.
White, Easton R., and Laurent Hébert-Dufresne. 2020. “State-Level Variation of Initial COVID-19 Dynamics in the United States.” Journal Article. PLOS ONE 15 (10): e0240648. https://doi.org/10.1371/journal.pone.0240648.
Wickham, Hadley. 2016. Ggplot2: Elegant Graphics for Data Analysis. Springer-Verlag New York. https://ggplot2.tidyverse.org.
———. 2021a. Forcats: Tools for Working with Categorical Variables (Factors). https://CRAN.R-project.org/package=forcats.
———. 2021b. Tidyr: Tidy Messy Data. https://CRAN.R-project.org/package=tidyr.
Wickham, Hadley, Mara Averick, Jennifer Bryan, Winston Chang, Lucy D’Agostino McGowan, Romain François, Garrett Grolemund, et al. 2019. “Welcome to the tidyverse.” Journal of Open Source Software 4 (43): 1686. https://doi.org/10.21105/joss.01686.
Wickham, Hadley, Romain François, Lionel Henry, and Kirill Müller. 2021. Dplyr: A Grammar of Data Manipulation. https://CRAN.R-project.org/package=dplyr.
Wickham, Hadley, and Jim Hester. 2021. Readr: Read Rectangular Text Data. https://CRAN.R-project.org/package=readr.
Wilhelm, Stefan, and Miguel Godinho de Matos. 2015. Spatialprobit: Spatial Probit Models. http://www.r-project.org.
Wong, David W. S., and Yun Li. 2020. “Spreading of COVID-19: Density Matters.” Journal Article. PLOS ONE 15 (12): e0242398. https://doi.org/10.1371/journal.pone.0242398.
Xie, Yihui. 2014. “Knitr: A Comprehensive Tool for Reproducible Research in R.” In Implementing Reproducible Computational Research, edited by Victoria Stodden, Friedrich Leisch, and Roger D. Peng. Chapman; Hall/CRC. http://www.crcpress.com/product/isbn/9781466561595.
———. 2015. Dynamic Documents with R and Knitr. 2nd ed. Boca Raton, Florida: Chapman; Hall/CRC. https://yihui.org/knitr/.
Xie, Yihui, J. J. Allaire, and Garrett Grolemund. 2018. R Markdown: The Definitive Guide. Boca Raton, Florida: Chapman; Hall/CRC. https://bookdown.org/yihui/rmarkdown.
Xie, Yihui, Christophe Dervieux, and Emily Riederer. 2020. R Markdown Cookbook. Boca Raton, Florida: Chapman; Hall/CRC. https://bookdown.org/yihui/rmarkdown-cookbook.
Zeileis, Achim. 2004. “Econometric Computing with HC and HAC Covariance Matrix Estimators.” Journal of Statistical Software 11 (10): 1–17. https://doi.org/10.18637/jss.v011.i10.
———. 2006. “Object-Oriented Computation of Sandwich Estimators.” Journal of Statistical Software 16 (9): 1–16. https://doi.org/10.18637/jss.v016.i09.
Zeileis, Achim, Susanne Köll, and Nathaniel Graham. 2020. “Various Versatile Variances: An Object-Oriented Implementation of Clustered Covariances in R.” Journal of Statistical Software 95 (1): 1–36. https://doi.org/10.18637/jss.v095.i01.
Zhu, Hao. 2021. kableExtra: Construct Complex Table with Kable and Pipe Syntax. https://CRAN.R-project.org/package=kableExtra.
Footnotes
-
Nobel Prize in Economics Paul Krugman noted that “Reinhart–Rogoff may have had more immediate influence on public debate than any previous paper in the history of economics” ↩
- ↩
-
Governor Kristi Noem of South Dakota, for example, claimed that sparse population density allowed her state to face the pandemic down without the need for strict policy interventions ↩
-
The present paper was desk rejected by three journals that had previously published research on population density and the spread of COVID-19; in one case, the paper was too opinionated for the journal, in the other two cases, the paper was not a “good fit” despite dealing with a nearly identical issue as papers previously published in said journals. ↩