Skip to content

ECP5 breakout board in a feather physical format

License

Unknown, MIT licenses found

Licenses found

Unknown
LICENCE-CERN-OHL
MIT
LICENCE-MIT
Notifications You must be signed in to change notification settings

orangecrab-fpga/orangecrab-hardware

Repository files navigation

OrangeCrab

OrangeCrab Web site

ECP5 FPGA Feather development board.

Front Photo

Latest Revision:

Previous Revisions:


What is it?

There aren't many OSHW ECP5 boards available. Given that this FPGA is fully supported by an open source toolchain I decided to create one. In order to make use of the DDR3L support the ECP5 has, I've added some DDR3L memory. The board matches the feather format

Hardware Overview

  • Lattice ECP5-25F or ECP5-85F FPGA in csfBGA285 package
    • 24 K - Look Up Tables
    • 1008 Kb - Embedded Block RAM
    • 194 Kb - Distributed RAM
    • 28 - 18x18 Multipliers
    • PLLs: 2
    • Internal oscillator
    • Flexible I/O for DDR3 Memory Support
  • DDR3L Memory
    • 128 Mbytes (1Gbit) or 512Mbytes (4Gbit)
    • x16 data width to FPGA
    • 1.35V low voltage operation
  • USB-C connection
    • Full-speed (12Mbit) USB with direct connection to FPGA
  • Non-volatile Storage
    • 128Mbit QSPI FLASH Memory
      • Bootloader (First 4Mbits)
      • User Bitstream
      • User storage (Firmware/MSC backend/etc)
      • QSPI compatible
    • MicroSD socket
      • 4bit SD interface (CK, CMD, DAT0-3)
  • Power supply
    • High efficiency DCDC for main supplies
    • Battery charger (100mA), with charge indicator LED
    • LiPo battery connector (PH type) (1-cell: 3.7-4.2V)
  • 48MHz onboard oscillator
  • Accessible 0.1" JTAG breakout
  • User I/O
    • 1x Button
    • 1x RGB LED
    • 20x I/O on 0.1" headers
  • Analog System
    • Analog Mux
    • SAR ADC, external RC / input comparator of FPGA
    • Digital bypass
    • Internal channels for supply monitor
    • Battery voltage sensing
  • Feather Format Board
    • Dimensions: 22.86mm x 50.8mm (0.9" x 2.0")
    • Castellated I/O edges

Back Photo

Example code

Example code for Verilog, Litex, And RiscV can be found here:

Community

We have an OrangeCrab group on the 1BitSquared Discord

Licence

  • Hardware in this repository is licensed under CERN OHL v1.2
  • Gateware/Software/Firmware in this repository is licensed under MIT unless otherwise indicated

Open Source Hardware

This board is an OSHWA approved design: AU000015

About

ECP5 breakout board in a feather physical format

Resources

License

Unknown, MIT licenses found

Licenses found

Unknown
LICENCE-CERN-OHL
MIT
LICENCE-MIT

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published