Document production profile

Dockerfile

@@ -52,7 +52,7 @@ RUN /subtensor/scripts/init.sh
 
 # Cargo build
 WORKDIR /subtensor
-RUN cargo build --release --features runtime-benchmarks --locked
+RUN cargo build --profile production --features runtime-benchmarks --locked
 EXPOSE 30333 9933 9944
 
 
@@ -61,4 +61,4 @@ FROM $BASE_IMAGE AS subtensor
 COPY --from=builder /subtensor/snapshot.json /
 COPY --from=builder /subtensor/raw_spec.json /
 COPY --from=builder /subtensor/raw_testspec.json /
-COPY --from=builder /subtensor/target/release/node-subtensor /usr/local/bin
+COPY --from=builder /subtensor/target/production/node-subtensor /usr/local/bin

docs/running-subtensor-locally.md

@@ -162,7 +162,7 @@ rm -rf /tmp/blockchain
 Install subtensor by compiling with `cargo`:
 
 ```bash
-cargo build --release --features=runtime-benchmarks
+cargo build --profile production --features=runtime-benchmarks
 ```
 
 ## Run the subtensor node
@@ -174,32 +174,33 @@ You can now run the public subtensor node either as a lite node or as an archive
 To run a lite node connected to the mainchain, execute the below command (note the `--sync=warp` flag which runs the subtensor node in lite mode):
 
 ```bash title="With --sync=warp setting, for lite node"
-./target/release/node-subtensor --chain raw_spec.json --base-path /tmp/blockchain --sync=warp --execution wasm --wasm-execution compiled --port 30333 --max-runtime-instances 32 --rpc-max-response-size 2048 --rpc-cors all --rpc-port 9944 --bootnodes /ip4/13.58.175.193/tcp/30333/p2p/12D3KooWDe7g2JbNETiKypcKT1KsCEZJbTzEHCn8hpd4PHZ6pdz5 --no-mdns --in-peers 8000 --out-peers 8000 --prometheus-external --rpc-external 
+./target/production/node-subtensor --chain raw_spec.json --base-path /tmp/blockchain --sync=warp --port 30333 --max-runtime-instances 32 --rpc-max-response-size 2048 --rpc-cors all --rpc-port 9944 --bootnodes /ip4/13.58.175.193/tcp/30333/p2p/12D3KooWDe7g2JbNETiKypcKT1KsCEZJbTzEHCn8hpd4PHZ6pdz5 --no-mdns --in-peers 8000 --out-peers 8000 --prometheus-external --rpc-external
 ```
 
 ### Archive node on mainchain
 
 To run an archive node connected to the mainchain, execute the below command (note the `--sync=full` which syncs the node to the full chain and `--pruning archive` flags, which disables the node's automatic pruning of older historical data):
 
 ```bash title="With --sync=full and --pruning archive setting, for archive node"
-./target/release/node-subtensor --chain raw_spec.json --base-path /tmp/blockchain --sync=full --pruning archive --execution wasm --wasm-execution compiled --port 30333 --max-runtime-instances 32 --rpc-max-response-size 2048 --rpc-cors all --rpc-port 9944 --bootnodes /ip4/13.58.175.193/tcp/30333/p2p/12D3KooWDe7g2JbNETiKypcKT1KsCEZJbTzEHCn8hpd4PHZ6pdz5 --no-mdns --in-peers 8000 --out-peers 8000 --prometheus-external --rpc-external 
+./target/production/node-subtensor --chain raw_spec.json --base-path /tmp/blockchain --sync=full --pruning archive --port 30333 --max-runtime-instances 32 --rpc-max-response-size 2048 --rpc-cors all --rpc-port 9944 --bootnodes /ip4/13.58.175.193/tcp/30333/p2p/12D3KooWDe7g2JbNETiKypcKT1KsCEZJbTzEHCn8hpd4PHZ6pdz5 --no-mdns --in-peers 8000 --out-peers 8000 --prometheus-external --rpc-external
 ```
 
 ### Lite node on testchain
 
 To run a lite node connected to the testchain, execute the below command:
 
 ```bash title="With bootnodes set to testnet and --sync=warp setting, for lite node."
-./target/release/node-subtensor --chain raw_testspec.json --base-path /tmp/blockchain --sync=warp --execution wasm --wasm-execution compiled --port 30333 --max-runtime-instances 32 --rpc-max-response-size 2048 --rpc-cors all --rpc-port  9944 --bootnodes /dns/bootnode.test.finney.opentensor.ai/tcp/30333/p2p/12D3KooWPM4mLcKJGtyVtkggqdG84zWrd7Rij6PGQDoijh1X86Vr --no-mdns --in-peers 8000 --out-peers 8000 --prometheus-external --rpc-external 
+./target/production/node-subtensor --chain raw_testspec.json --base-path /tmp/blockchain --sync=warp --port 30333 --max-runtime-instances 32 --rpc-max-response-size 2048 --rpc-cors all --rpc-port  9944 --bootnodes /dns/bootnode.test.finney.opentensor.ai/tcp/30333/p2p/12D3KooWPM4mLcKJGtyVtkggqdG84zWrd7Rij6PGQDoijh1X86Vr --no-mdns --in-peers 8000 --out-peers 8000 --prometheus-external --rpc-external
 ```
 
 ### Archive node on testchain
 
 To run an archive node connected to the testchain, execute the below command:
 
 ```bash title="With bootnodes set to testnet and --sync=full and --pruning archive setting, for archive node"
-./target/release/node-subtensor --chain raw_testspec.json --base-path /tmp/blockchain --sync=full --pruning archive --execution wasm --wasm-execution compiled --port 30333 --max-runtime-instances 32 --rpc-max-response-size 2048 --rpc-cors all --rpc-port 9944 --bootnodes /dns/bootnode.test.finney.opentensor.ai/tcp/30333/p2p/12D3KooWPM4mLcKJGtyVtkggqdG84zWrd7Rij6PGQDoijh1X86Vr --no-mdns --in-peers 8000 --out-peers 8000 --prometheus-external --rpc-external 
+./target/production/node-subtensor --chain raw_testspec.json --base-path /tmp/blockchain --sync=full --pruning archive --port 30333 --max-runtime-instances 32 --rpc-max-response-size 2048 --rpc-cors all --rpc-port 9944 --bootnodes /dns/bootnode.test.finney.opentensor.ai/tcp/30333/p2p/12D3KooWPM4mLcKJGtyVtkggqdG84zWrd7Rij6PGQDoijh1X86Vr --no-mdns --in-peers 8000 --out-peers 8000 --prometheus-external --rpc-external
 ```
 
 ## Running on cloud
+
 We have not tested these installation scripts on any cloud service. In addition, if you are using Runpod cloud service, then note that this service is already [containerized](https://docs.runpod.io/pods/overview). Hence, the only option available to you is to compile from the source, as described in the above [Method 2: Using Source Code](#method-2-using-source-code) section. Note that these scripts have not been tested on Runpod.

docs/rust-setup.md

@@ -1,8 +1,7 @@
 ---
 title: Installation
 ---
-
-This guide is for reference only, please check the latest information on getting starting with Substrate 
+This guide is for reference only, please check the latest information on getting starting with Substrate
 [here](https://docs.substrate.io/main-docs/install/).
 
 This page will guide you through the **2 steps** needed to prepare a computer for **Substrate** development.
@@ -207,7 +206,7 @@ Use the `WASM_BUILD_TOOLCHAIN` environment variable to specify the Rust nightly
 project should use for Wasm compilation:
 
 ```bash
-WASM_BUILD_TOOLCHAIN=nightly-<yyyy-MM-dd> cargo build --release
+WASM_BUILD_TOOLCHAIN=nightly-<yyyy-MM-dd> cargo build --profile production
 ```
 
 > Note that this only builds _the runtime_ with the specified nightly. The rest of project will be
@@ -223,3 +222,4 @@ rustup uninstall nightly
 rustup install nightly-<yyyy-MM-dd>
 rustup target add wasm32-unknown-unknown --toolchain nightly-<yyyy-MM-dd>
 ```
+

pallets/admin-utils/scripts/benchmark.sh

@@ -1,11 +1,9 @@
-cargo build --release --features runtime-benchmarks
-./target/release/node-subtensor benchmark pallet \
-    --chain=local \
-    --execution=wasm \
-    --wasm-execution=compiled \
-    --pallet=pallet_admin_utils \
-    --extrinsic="*" \
-    --steps 50 \
-    --repeat 20 \
-    --output=pallets/admin-utils/src/weights.rs \
-    --template=./.maintain/frame-weight-template.hbs
+cargo build --profile production --features runtime-benchmarks
+./target/production/node-subtensor benchmark pallet \
+  --chain=local \
+  --pallet=pallet_admin_utils \
+  --extrinsic="*" \
+  --steps 50 \
+  --repeat 20 \
+  --output=pallets/admin-utils/src/weights.rs \
+  --template=./.maintain/frame-weight-template.hbs

pallets/commitments/scripts/benchmark.sh

@@ -1,9 +1,7 @@
-cargo build --release --features runtime-benchmarks
-./target/release/node-subtensor benchmark pallet \
-    --chain=local \
-    --execution=wasm \
-    --wasm-execution=compiled \
-    --pallet=pallet_commitments \
-    --extrinsic="*" \
-    --output=pallets/commitments/src/weights.rs \
-    --template=./.maintain/frame-weight-template.hbs
+cargo build --profile production --features runtime-benchmarks
+./target/production/node-subtensor benchmark pallet \
+  --chain=local \
+  --pallet=pallet_commitments \
+  --extrinsic="*" \
+  --output=pallets/commitments/src/weights.rs \
+  --template=./.maintain/frame-weight-template.hbs

pallets/registry/scripts/benchmark.sh

@@ -1,9 +1,7 @@
 cargo build --release --features runtime-benchmarks
-./target/release/node-subtensor benchmark pallet \
-    --chain=local \
-    --execution=wasm \
-    --wasm-execution=compiled \
-    --pallet=pallet_registry \
-    --extrinsic="*" \
-    --output=pallets/registry/src/weights.rs \
-    --template=./.maintain/frame-weight-template.hbs
+./target/production/node-subtensor benchmark pallet \
+  --chain=local \
+  --pallet=pallet_registry \
+  --extrinsic="*" \
+  --output=pallets/registry/src/weights.rs \
+  --template=./.maintain/frame-weight-template.hbs

scripts/benchmark.sh

@@ -1,49 +1,46 @@
 #!/usr/bin/env bash
 
-
-DEFAULT_BIN_PATH='./target/release/node-subtensor'
+DEFAULT_BIN_PATH='./target/production/node-subtensor'
 BIN_PATH=$DEFAULT_BIN_PATH
 TMP_SPEC='temp.json'
 OUTPUT_FILE='benchmarking.txt'
 
-
 # Getting arguments from user
 while [[ $# -gt 0 ]]; do
   case $1 in
-    -p|--bin-path)
-      BIN_PATH="$2"
-      shift
-      shift
-      ;;
-    -*|--*)
-      echo "Unknown option $1"
-      exit 1
-      ;;
-    *)
-      POSITIONAL_ARGS+=("$1")
-      shift
-      ;;
+  -p | --bin-path)
+    BIN_PATH="$2"
+    shift
+    shift
+    ;;
+  -* | --*)
+    echo "Unknown option $1"
+    exit 1
+    ;;
+  *)
+    POSITIONAL_ARGS+=("$1")
+    shift
+    ;;
   esac
 done
 
 # Ensure binary exists before node-subtensor executions
 if [ ! -f $BIN_PATH ]; then
-    if [[ "$DEFAULT_BIN_PATH" == "$BIN_PATH" ]]; then
-        cargo build --release --features runtime-benchmarks
-    else
-        echo "Binary '$BIN_PATH' does not exist. You can use -p or --bin-path to specify a different location."
-        exit 1
-    fi
+  if [[ "$DEFAULT_BIN_PATH" == "$BIN_PATH" ]]; then
+    cargo build --profile production --features runtime-benchmarks
+  else
+    echo "Binary '$BIN_PATH' does not exist. You can use -p or --bin-path to specify a different location."
+    exit 1
+  fi
 fi
 
 # Build Temporary Spec
-$BIN_PATH build-spec --disable-default-bootnode --raw --chain local > $TMP_SPEC
+$BIN_PATH build-spec --disable-default-bootnode --raw --chain local >$TMP_SPEC
 
 # Run benchmark
 $BIN_PATH benchmark pallet \
-    --chain=$TMP_SPEC \
-    --execution=native  --wasm-execution=compiled \
-    --pallet pallet-subtensor --extrinsic 'benchmark_dissolve_network' \
-    --output $OUTPUT_FILE
+  --chain=$TMP_SPEC \
+  --pallet pallet-subtensor --extrinsic 'benchmark_dissolve_network' \
+  --output $OUTPUT_FILE
 
-rm $TMP_SPEC
+rm $TMP_SPEC

scripts/build.sh

@@ -1 +1,2 @@
-cargo build --release --features runtime-benchmarks
+cargo build --profile production --features runtime-benchmarks
+