opx show global switch

COMMAND

opx-show-global-switch — Displays current configuration and switch status

SYNOPSIS

opx-show-global-switch [-h,--help]

OPTION

Option	Description
-h,--help	Displays help text

OUTPUT

Output	Description
ACL entry max priority	Maximum priority of an ACL table entry
ACL entry min priority	Minimum priority of an ACL table entry
ACL table max priority	Maximum priority of an ACL table entry
ACL table min priority	Minimum priority of an ACL table entry
Admin status	Administrative status
Bridge table size	Bridge table size
BST enable	BST enable
BST tracking mode	BST tracking mode
Counter refresh interval	Counter refresh interval
Current profile	Switch profile currently in use
Deep buffer mode enable	Deep buffer mode enable
Default MAC address	Switch default MAC address
Default profile	Switch default profile
Default VLAN id	VLAN to which untagged incoming Ethernet frames are assigned
Disable default VLAN	Disable default VLAN
ECMP group size	ECMP group size
ECMP hash algorithm	ECMP hash algorithm
ECMP hash fields	List of frame/packet fields which are ECMP hash seed value
ECN ECT threshold enable	ECN ECT threshold enable
Egress buffer pool num	Egress buffer pool number
Egress flow table size	Egress flow table size
Ingress buffer pool num	Ingress buffer pool number
Ingress flow table size	Ingress flow table size
IPv4 host size	IPv4 host size
IPv4 route table size	IPv4 route table size
IPv6 extended prefix routes	IPv6 extended prefix routes
IPv6 extended prefix routes LPM block size	IPv6 extended prefix routes LPM block size
IPv6 host size	IPv6 host size
IPv6 route table size	IPv6 route table size
L3 nexthop table size	L3 next-hop table size
LAG hash algorithm	LAG hash algorithm
LAG hash fields	LAG hash fields
LAG hash seed value	LAG has seed value
MAC address aging timer	MAC address aging timer
Max ECMP entry per group	Maximum ECMP entry per group
Max IPv6 extended prefix routes	Maximum IPv6 extended prefix routes
Max MTU	Maximum MTU
Max supported lags	Maximum supported LAGs
Max VXLAN overlay nexthops	Maximum VxLAN overlay next-hops
Max VXLAN overlay RIFs	Maximum VxLAN overlay RIFs
Next profile	Switch profile that will be used after the next boot
NPU identifiers	Networking processing unit identifiers
Number of multicast queues per port	Number of multicast queues per port
Number of queues CPU port	Number of queues per CPU port
Number of queues per port	Number of queues per port
Number of unicast queues per port	Number of unicast queues per port
Operational status	Operational status
PFC dl cfg params	PFC DL configuration parameters
PFC dld interval range max	PFC DLD interval range maximum
PFC dld interval range min	PFC DLD interval range minimum
PFC dlr action	PFC DLR action
PFC dlr interval range max	PFC DLR interval range maximum
PFC dlr interval range min	PFC DLR interval range minimum
QoS rate adjust	Quality of service rate adjustment
RIF table size	RIF table size
Supported profiles	List of profiles currently supported
Switch mode	Switch mode
Temperature	Temperature reading (in degrees Celsius) of the NPU junction sensor
Total buffer size	Total buffer size
UFT mode	Current UFT (unified forwarding table) mode
UFT host table size	UFT host table size
UFT L2 mac table size	UFT L2 MAC table size
UFT L3 route table size	UFT L3 route table size
VXLAN riot enable	VxLAN riot enable

NOTE: Not all fields are shown on all platforms.

EXIT STATUS

If there is a syntax error in the given arguments, the exit status shall be 2.
Otherwise, the exit status is 0.

EXAMPLE

$ opx-show-global-switch
Switch id 0
        ACL entry max priority:                     2147483647
        ACL entry min priority:                     0
        ACL table max priority:                     11
        ACL table min priority:                     0
        Bridge table size:                          139264
        Counter refresh interval:                   5 s
        Current profile:                            profile-1
        Default MAC address:                        50:9a:4c:d5:ac:f0
        Default profile:                            profile-1
        ECMP hash algorithm:                        crc
        ECMP hash seed value:                       0
        Egress buffer pool num:                     4
        Ingress buffer pool num:                    4
        IPv6 extended prefix routes:                0
        IPv6 extended prefix routes LPM block size: 1024
        LAG hash algorithm:                         crc
        LAG hash seed value:                        0
        MAC address aging timer:                    1800 s
        Max ECMP entry per group:                   0
        Max IPv6 extended prefix routes:            3072
        Max MTU:                                    9216
        Next profile:                               profile-1
        Number of multicast queues per port:        10
        Number of queues CPU port:                  48
        Number of queues per port:                  20
        Number of unicast queues per port:          10
        Supported profiles:                         profile-1 profile-2
        Switch mode:                                store and forward
        Temperature:                                37 deg. C
        Total buffer size:                          43008
        UFT mode:                                   default
        UFT host table size:                        139264
        UFT L2 mac table size:                      139264
        UFT L3 route table size:                    32768

REPORT BUGS

To report any OPX software bugs, see Report bugs.

SEE ALSO

opx-config-global-switch