Command-line tool for generating WireGuard configuration files for NordVPN
# wg-nord --server us9591.nordvpn.com --token 818f804a2c24e89082a37d1486ac45b83f9452ea9b953678c7e115f354f96463
[Interface]
PrivateKey = IDQu32ovMxFQ3VSywgKTUBFGs/CN/S3ouWAmV6nsc1M=
Address = 10.5.0.2, 2a0d:5600:8:26a:0:11:5:2
DNS = 103.86.96.100, 2400:bb40:4444::100
[Peer]
PublicKey = V1WC7wt34kcSDyqPuUhN56NJ0v+GlqY9TwZR5WlzzB4=
AllowedIPs = 0.0.0.0/0, ::/0
Endpoint = us9591.nordvpn.com:51820
PersistentKeepalive = 25
You can either
- Install via
cargo install wg-nord --git https://github.com/n-thumann/wg-nord/
- Download a precompiled binary of the latest release
- Pick a server from https://nordvpn.com/servers/tools/. Make sure that is supports WireGuard.
- Obtain a token from the NordVPN (see https://support.nordvpn.com/hc/en-us/articles/20286980309265-How-to-use-a-token-with-NordVPN-on-Linux).
- Run
wg-nord --server <server> --token <token>
(see below) - Copy & paste the output into your WireGuard client
Command-line tool for generating WireGuard configuration files for NordVPN
Usage: wg-nord [OPTIONS] --server <SERVER> --token <TOKEN>
Options:
--server <SERVER> NordVPN server
--token <TOKEN> NordVPN token [env: TOKEN=]
--dns-servers <DNS_SERVERS> DNS servers [default: 103.86.96.100 2400:bb40:4444::100]
--allowed-ips <ALLOWED_IPS> Allowed IPs [default: 0.0.0.0/0 ::/0]
-h, --help Print help
-V, --version Print version
-
Specify custom DNS servers
# wg-nord --dns-servers 1.1.1.1 --dns-servers 2606:4700:4700::1111 --server us9591.nordvpn.com --token 818f804a2c24e89082a37d1486ac45b83f9452ea9b953678c7e115f354f96463 [Interface] PrivateKey = IDQu32ovMxFQ3VSywgKTUBFGs/CN/S3ouWAmV6nsc1M= Address = 10.5.0.2, 2a0d:5600:8:26a:0:11:5:2 DNS = 1.1.1.1, 2606:4700:4700::1111 [Peer] PublicKey = V1WC7wt34kcSDyqPuUhN56NJ0v+GlqY9TwZR5WlzzB4= AllowedIPs = 0.0.0.0/0, ::/0 Endpoint = us9591.nordvpn.com:51820 PersistentKeepalive = 25
-
Specify custom allowed IPs (only route specify prefixed via WireGuard)
# wg-nord --allowed-ips 1.0.0.0/24 --allowed-ips 2606:4700::/36 --server us9591.nordvpn.com --token 818f804a2c24e89082a37d1486ac45b83f9452ea9b953678c7e115f354f96463 [Interface] PrivateKey = IDQu32ovMxFQ3VSywgKTUBFGs/CN/S3ouWAmV6nsc1M= Address = 10.5.0.2, 2a0d:5600:8:26a:0:11:5:2 DNS = 103.86.96.100, 2400:bb40:4444::100 [Peer] PublicKey = V1WC7wt34kcSDyqPuUhN56NJ0v+GlqY9TwZR5WlzzB4= AllowedIPs = 1.0.0.0/24, 2606:4700::/36 Endpoint = us9591.nordvpn.com:51820 PersistentKeepalive = 25
-
Specifying IPv6 DNS servers or allowed IPs on NordVPN server without IPv6 support will be ignored
wg-nord --dns-servers 1.1.1.1 --dns-servers 2606:4700:4700::1111 --allowed-ips 1.0.0.0/24 --allowed-ips 2606:4700::/36 --server us9590.nordvpn.com --token 818f804a2c24e89082a37d1486ac45b83f9452ea9b953678c7e115f354f96463 [Interface] PrivateKey = IDQu32ovMxFQ3VSywgKTUBFGs/CN/S3ouWAmV6nsc1M= Address = 10.5.0.2 DNS = 1.1.1.1 [Peer] PublicKey = V1WC7wt34kcSDyqPuUhN56NJ0v+GlqY9TwZR5WlzzB4= AllowedIPs = 1.0.0.0/24 Endpoint = us9590.nordvpn.com:51820 PersistentKeepalive = 25
Install Rust and run cargo build
.
NordLynx by NordVPN is based on WireGuard, but there's no official way to download a WireGuard configuration file directly, like with OpenVPN. WireGuard is only supported by using NordVPN's official apps. Therefore, I dug through the code of the NordVPN Linux client to figure out how their WireGuard configuration is created.
Compared to the official Linux client, wg-nord even supports IPv6 by default (enabled on us9591.nordvpn.com
and us9592.nordvpn.com
at the time of writing).