Allow --no-src during clones and git worktree after clones
#536
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
derrickstolee
force-pushed
the
src-and-worktrees
branch
from
43c7dd7
to
fe5f482
Compare
dscho
approved these changes
Oct 3, 2022
The strip_last_component() method is helpful for finding the parent directory of a path stored in a strbuf. Extract it to a global method advertised in path.h. With that additional visibility, it is helpful to rename it to be more specific to paths. Signed-off-by: Derrick Stolee <derrickstolee@github.com>
We should not be putting the .scalarCache inside the enlistment as a sibling to the 'src' directory. This only happens in "unattended" mode, but it also negates any benefit of a shared object cache because each enlistment absolutely does not share any objects with others. Move the shared object cache in this case to a level above the enlistment, so at least there is some hope that it can be reused. This is also critical to the upcoming --no-src option, since the shared object cache cannot be located within the Git repository. Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Some users have strong aversions to Scalar's opinion that the repository should be in a 'src' directory, even though it creates a clean slate for placing build outputs in adjacent directories. The --no-src option allows users to opt-out of the default behavior. Signed-off-by: Derrick Stolee <derrickstolee@github.com>
The 'git worktree' command was marked as BLOCK_ON_GVFS_REPO because it does not interact well with the virtual filesystem of VFS for Git. When a Scalar clone uses the GVFS protocol, it enables the GVFS_BLOCK_COMMANDS flag, since commands like 'git gc' do not work well with the GVFS protocol. However, 'git worktree' works just fine with the GVFS protocol since it isn't doing anything special. It copies the sparse-checkout from the current worktree, so it does not have performance issues. This is a highly requested option. The solution is to stop using the BLOCK_ON_GVFS_REPO option and instead add a special-case check in cmd_worktree() specifically for a particular bit of the 'core_gvfs' global variable (loaded by very early config reading) that corresponds to the virtual filesystem. The bit that most closely resembled this behavior was non-obviously named, but does provide a signal that we are in a Scalar clone and not a VFS for Git clone. The error message is copied from git.c, so it will have the same output as before if a user runs this in a VFS for Git clone. Signed-off-by: Derrick Stolee <derrickstolee@github.com>
derrickstolee
force-pushed
the
src-and-worktrees
branch
from
fe5f482
to
905bb12
Compare
|
I rebased this onto (I also realized that I had forgotten the |
Merged
|
Closing this since we don't want to merge into |
dscho
added a commit
that referenced
this pull request
Oct 5, 2022
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
derrickstolee
pushed a commit
that referenced
this pull request
Oct 19, 2022
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 23, 2022
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 23, 2022
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 23, 2022
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 23, 2022
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
derrickstolee
pushed a commit
that referenced
this pull request
Dec 14, 2022
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
derrickstolee
pushed a commit
that referenced
this pull request
Jan 17, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
derrickstolee
pushed a commit
that referenced
this pull request
Feb 27, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
derrickstolee
pushed a commit
that referenced
this pull request
Mar 2, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
derrickstolee
pushed a commit
that referenced
this pull request
Mar 8, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Mar 14, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
derrickstolee
pushed a commit
that referenced
this pull request
Apr 25, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
vdye
pushed a commit
that referenced
this pull request
May 17, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
vdye
pushed a commit
that referenced
this pull request
May 17, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Aug 8, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Aug 11, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
jeffhostetler
pushed a commit
that referenced
this pull request
Aug 23, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 3, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 3, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 3, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 8, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 14, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Nov 20, 2023
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
vdye
pushed a commit
that referenced
this pull request
Feb 27, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Apr 23, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Apr 23, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Apr 23, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Apr 23, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Apr 24, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Apr 29, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
May 14, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
May 14, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Jun 3, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Jun 3, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Jun 3, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Jul 17, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Jul 17, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Jul 17, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Jul 18, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
mjcheetham
pushed a commit
that referenced
this pull request
Jul 23, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Jul 25, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
mjcheetham
pushed a commit
that referenced
this pull request
Jul 29, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
dscho
added a commit
that referenced
this pull request
Sep 18, 2024
…e after clones These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos. 1. Remove the requirement that we create a `src` directory at clone time. 2. Allow `git worktree` even when using the GVFS protocol. These are not difficult to implement. The `--no-src` option could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
These are two highly-requested items from an internal team considering a move to Scalar using Azure Repos.
srcdirectory at clone time.git worktreeeven when using the GVFS protocol.These are not difficult to implement. The
--no-srcoption could even be submitted upstream (though the commit will need to drop one bit about an interaction with the local cache path).