This is an Emacs configuration file written in Org mode. It is an attempt to
keep my ~/.emacs.d
tidy, but still be able to keep it all in one file. I
aim to briefly explain all my configurations as I go along!
I would not recommend using this configuration as-is, because it probably contains a lot you don’t really need. I do, however, hope people find some golden nuggets that they can smuggle into their own configs.
If you really do want to try this config out, this is how I’d go about it:
Clone the repo.
git clone https://github.com/larstvei/dot-emacs
Backup your old ~/.emacs.d
(if necessary).
mv ~/.emacs.d ~/.emacs.d-bak
Backup your old ~/.emacs
-file (if necessary).
mv ~/.emacs ~/.emacs-bak
And finally
mv dot-emacs ~/.emacs.d
On first run it should install a bunch of packages (this might take a while), and you might have to restart your Emacs the first time. If you experience bugs, please let me know!
I keep an updated nix flake for my Emacs config. If that tells you anything, you can try it out running:
nix run github:larstvei/emacs-flake
All changes to the configuration should be done in init.org
, not in
init.el
. Any changes in the init.el
will be overwritten by saving
init.org
. The init.el
in this repo should not be tracked by git, and is
replaced the first time Emacs is started (assuming it has been renamed to
~/.emacs.d
).
Emacs can’t load .org
-files directly, but org-mode
provides functions to
extract the code blocks and write them to a file. There are multiple ways of
handling this; like suggested by this StackOverflow post, one could just use
org-babel-load-file
, but I had problems with byte-compilation. Previously I
tracked both the org.
- and el.
-files, but the git commits got a little
messy. So here is a new approach.
When this configuration is loaded for the first time, the init.el
is the
file that is loaded. It looks like this:
;; This file replaces itself with the actual configuration at first run.
;; We can't tangle without org!
(require 'org)
;; Open the configuration
(find-file (concat user-emacs-directory "init.org"))
;; tangle it
(org-babel-tangle)
;; load it
(load-file (concat user-emacs-directory "init.el"))
;; finally byte-compile it
(byte-compile-file (concat user-emacs-directory "init.el"))
It tangles the org-file, so that this file is overwritten with the actual configuration.
There is no reason to track the init.el
that is generated; by running the
following command git
will not bother tracking it:
git update-index --assume-unchanged init.el
If one wishes to make changes to the repo-version of init.el
start tracking
again with:
git update-index --no-assume-unchanged init.el
I want lexical scoping for the init-file, which can be specified in the header. The first line of the configuration is as follows:
;;; -*- lexical-binding: t -*-
The init.el
should (after the first run) mirror the source blocks in the
init.org
. We can use C-c C-v t
to run org-babel-tangle
, which extracts
the code blocks from the current file into a source-specific file (in this
case a .el
-file).
To avoid doing this each time a change is made we can add a function to the
after-save-hook
ensuring to always tangle and byte-compile the
org
-document after changes.
(defun tangle-init ()
"If the current buffer is init.org the code-blocks are
tangled, and the tangled file is compiled."
(when (equal (buffer-file-name)
(expand-file-name (concat user-emacs-directory "init.org")))
;; Avoid running hooks when tangling.
(let ((prog-mode-hook nil))
(org-babel-tangle)
(byte-compile-file (concat user-emacs-directory "init.el")))))
(add-hook 'after-save-hook 'tangle-init)
I’d like to keep a few settings private, so we load a private.el
if it
exists after the init-file has loaded.
(add-hook
'after-init-hook
(lambda ()
(let ((private-file (concat user-emacs-directory "private.el")))
(when (file-exists-p private-file)
(load-file private-file))
(when custom-file
(load-file custom-file))
(server-start))))
A common optimization is to temporarily disable garbage collection during
initialization. Here, we set the gc-cons-threshold
to a ridiculously large
number, and restore the default value after initialization.
(setq gc-cons-threshold most-positive-fixnum)
(add-hook 'after-init-hook
(lambda ()
(setq gc-cons-threshold (* 1024 1024 20))))
John Wiegley’s extremely popular use-package was included in Emacs 29. It provides a powerful macro for isolating package configuration. After ignoring this for a decade, I’ll budge and give it a whirl.
(require 'use-package)
(setq use-package-always-ensure t)
Packages can be fetched from different mirrors, melpa is the largest archive and is well maintained.
(setq package-archives
'(("GNU ELPA" . "https://elpa.gnu.org/packages/")
("MELPA Stable" . "https://stable.melpa.org/packages/")
("MELPA" . "https://melpa.org/packages/"))
package-archive-priorities
'(("GNU ELPA" . 10)
("MELPA" . 5)
("MELPA Stable" . 0)))
These are what I consider to be saner defaults.
Set utf-8
as preferred coding system.
(set-language-environment "UTF-8")
(prefer-coding-system 'utf-8)
We can set variables to whatever value we’d like using setq
.
(setq auto-revert-interval 1 ; Refresh buffers fast
default-input-method "TeX" ; Use TeX when toggling input method
echo-keystrokes 0.1 ; Show keystrokes asap
enable-recursive-minibuffers t ; Allow recursive minibuffers
frame-inhibit-implied-resize 1 ; Don't resize frame implicitly
inhibit-startup-screen t ; No splash screen please
initial-scratch-message nil ; Clean scratch buffer
recentf-max-saved-items 10000 ; Show more recent files
ring-bell-function 'ignore ; Quiet
scroll-margin 1 ; Space between cursor and top/bottom
sentence-end-double-space nil ; No double space
custom-file ; Customizations in a separate file
(concat user-emacs-directory "custom.el"))
;; Some mac-bindings interfere with Emacs bindings.
(when (boundp 'mac-pass-command-to-system)
(setq mac-pass-command-to-system nil))
Some variables are buffer-local, so changing them using setq
will only
change them in a single buffer. Using setq-default
we change the
buffer-local variable’s default value.
(setq-default tab-width 4 ; Smaller tabs
fill-column 79 ; Maximum line width
truncate-lines t ; Don't fold lines
indent-tabs-mode nil ; Use spaces instead of tabs
split-width-threshold 160 ; Split verticly by default
split-height-threshold nil ; Split verticly by default
frame-resize-pixelwise t ; Fine-grained frame resize
auto-fill-function 'do-auto-fill) ; Auto-fill-mode everywhere
The load-path
specifies where Emacs should look for .el
-files (or
Emacs lisp files). I have a directory called site-lisp
where I keep all
extensions that have been installed manually (these are mostly my own
projects).
(let ((default-directory (concat user-emacs-directory "site-lisp/")))
(when (file-exists-p default-directory)
(setq load-path
(append
(let ((load-path (copy-sequence load-path)))
(normal-top-level-add-subdirs-to-load-path)) load-path))))
Answering yes and no to each question from Emacs can be tedious, a single y or n will suffice.
(fset 'yes-or-no-p 'y-or-n-p)
To avoid file system clutter we put all auto saved files in a single directory.
(defvar emacs-autosave-directory
(concat user-emacs-directory "autosaves/")
"This variable dictates where to put auto saves. It is set to a
directory called autosaves located wherever your .emacs.d/ is
located.")
;; Sets all files to be backed up and auto saved in a single directory.
(setq backup-directory-alist
`((".*" . ,emacs-autosave-directory))
auto-save-file-name-transforms
`((".*" ,emacs-autosave-directory t)))
By default the narrow-to-region
command is disabled and issues a
warning, because it might confuse new users. I find it useful sometimes,
and don’t want to be warned.
(put 'narrow-to-region 'disabled nil)
Automaticly revert doc-view
-buffers when the file changes on disk.
(add-hook 'doc-view-mode-hook 'auto-revert-mode)
Inspired by this StackOverflow post I keep a custom-bindings-map
that holds
all my custom bindings. This map can be activated by toggling a simple
minor-mode
that does nothing more than activating the map. This inhibits
other major-modes
to override these bindings.
(defvar custom-bindings-map (make-keymap)
"A keymap for custom bindings.")
I have been wanting to try out modal editing. [[https://github.com/meow-edit/meow][meow] seems like a nice package, where I can still use a lot of the ten years of Emacs that are already in my fingers. These are the default settings for qwerty.
(use-package meow
:config
(setq meow-cheatsheet-layout meow-cheatsheet-layout-qwerty)
(add-to-list 'meow-mode-state-list '(vterm-mode . insert))
(add-to-list 'meow-mode-state-list '(comint-mode . insert))
(meow-motion-overwrite-define-key
'("j" . meow-next)
'("k" . meow-prev)
'("<escape>" . ignore))
(meow-leader-define-key
;; SPC j/k will run the original command in MOTION state.
'("j" . "H-j")
'("k" . "H-k")
;; Use SPC (0-9) for digit arguments.
'("1" . meow-digit-argument)
'("2" . meow-digit-argument)
'("3" . meow-digit-argument)
'("4" . meow-digit-argument)
'("5" . meow-digit-argument)
'("6" . meow-digit-argument)
'("7" . meow-digit-argument)
'("8" . meow-digit-argument)
'("9" . meow-digit-argument)
'("0" . meow-digit-argument)
'("/" . meow-keypad-describe-key)
'("?" . meow-cheatsheet))
(meow-normal-define-key
'("0" . meow-expand-0)
'("9" . meow-expand-9)
'("8" . meow-expand-8)
'("7" . meow-expand-7)
'("6" . meow-expand-6)
'("5" . meow-expand-5)
'("4" . meow-expand-4)
'("3" . meow-expand-3)
'("2" . meow-expand-2)
'("1" . meow-expand-1)
'("-" . negative-argument)
'(";" . meow-reverse)
'("," . meow-inner-of-thing)
'("." . meow-bounds-of-thing)
'("[" . meow-beginning-of-thing)
'("]" . meow-end-of-thing)
'("a" . meow-append)
'("A" . meow-open-below)
'("b" . meow-back-word)
'("B" . meow-back-symbol)
'("c" . meow-change)
'("d" . meow-delete)
'("D" . meow-backward-delete)
'("e" . meow-next-word)
'("E" . meow-next-symbol)
'("f" . meow-find)
'("g" . meow-cancel-selection)
'("G" . meow-grab)
'("h" . meow-left)
'("H" . meow-left-expand)
'("i" . meow-insert)
'("I" . meow-open-above)
'("j" . meow-next)
'("J" . meow-next-expand)
'("k" . meow-prev)
'("K" . meow-prev-expand)
'("l" . meow-right)
'("L" . meow-right-expand)
'("m" . meow-join)
'("n" . meow-search)
'("o" . meow-block)
'("O" . meow-to-block)
'("p" . meow-yank)
'("q" . meow-quit)
'("Q" . meow-goto-line)
'("r" . meow-replace)
'("R" . meow-swap-grab)
'("s" . meow-kill)
'("t" . meow-till)
'("u" . meow-undo)
'("U" . meow-undo-in-selection)
'("v" . meow-visit)
'("w" . meow-mark-word)
'("W" . meow-mark-symbol)
'("x" . meow-line)
'("X" . meow-goto-line)
'("y" . meow-save)
'("Y" . meow-sync-grab)
'("z" . meow-pop-selection)
'("'" . repeat)
'("<escape>" . ignore))
(meow-global-mode 1))
First off, let’s declutter. Remove clickies to give a nice and clean look. Also, the cursor can relax. We add this to the early-init, as it might be marginally faster, and look less wonky.
(dolist (mode
'(tool-bar-mode ; No toolbars, more room for text
scroll-bar-mode ; No scroll bars either
blink-cursor-mode)) ; The blinking cursor gets old
(funcall mode 0))
Add a small border on the frame. This also goes in the early-init.
(add-to-list 'default-frame-alist '(undecorated-round . t))
(add-to-list 'default-frame-alist '(internal-border-width . 24))
I am using a lot from rougier’s N Λ N O Emacs, starting with the theme.
For the light theme, I keep the light background toned down a touch.
;; N Λ N O theme
(use-package nano-theme
:init
(setq nano-light-background "#fafafa"
nano-light-highlight "#f5f7f8"))
The theme is set according to the system appearance (on macOS) if that is available, defaulting to a light theme.
(defun load-nano-theme (variant)
(let ((theme (intern (concat "nano-" (symbol-name variant)))))
(load-theme theme t)))
(load-nano-theme (if (boundp 'ns-system-appearance) ns-system-appearance 'light))
Let’s have Emacs change theme when the system appearance changes as well.
(when (boundp 'ns-system-appearance-change-functions)
(add-hook 'ns-system-appearance-change-functions 'load-nano-theme))
I want to be able to quickly switch between a light and a dark theme.
(defun cycle-themes ()
"Returns a function that lets you cycle your themes."
(let ((themes '(nano-light nano-dark)))
(lambda ()
(interactive)
;; Rotates the thme cycle and changes the current theme.
(let ((rotated (nconc (cdr themes) (list (car themes)))))
(load-theme (car (setq themes rotated)) t))
(message (concat "Switched to " (symbol-name (car themes)))))))
This is my setup for N Λ N O Modeline after version 1.0.0:
;; N Λ N O modeline
(use-package nano-modeline
:after meow
:init
;; Disable the default modeline
(setq-default mode-line-format nil)
:config
(defun meow-nano-modeline-indicator ()
"Create the status indicator for the modeline."
(pcase (meow--current-state)
('normal (propertize " N " 'face (nano-modeline-face 'status-RO)))
('motion (propertize " M " 'face (nano-modeline-face 'status-RO)))
('insert (propertize " I " 'face (nano-modeline-face 'status-RW)))
('keypad (propertize " K " 'face (nano-modeline-face 'status-**)))
('beacon (propertize " B " 'face (nano-modeline-face 'status-**)))))
(defun my-default-nano-modeline (&optional default)
"My nano modeline configuration."
(funcall nano-modeline-position
`((nano-modeline-buffer-status)
(meow-nano-modeline-indicator) " "
(nano-modeline-buffer-name) " "
(nano-modeline-git-info))
`((nano-modeline-cursor-position)
(nano-modeline-window-dedicated))
default))
(my-default-nano-modeline 1))
I primarily use Adobe Fonts.
My default monospace font is Source Code Pro:
(when (member "Source Code Pro" (font-family-list))
(set-face-attribute 'default nil :font "Source Code Pro-15"))
My preferred proportional font is Source Serif. In order to get variable-pitch fonts where it makes sense, I use mixed-pitch.
;; Use a variable pitch, keeping fixed pitch where it's sensible
(use-package mixed-pitch
:defer t
:hook (text-mode . mixed-pitch-mode)
:config
(when (member "Source Serif Pro" (font-family-list))
(set-face-attribute 'variable-pitch nil :family "Source Serif Pro")))
Olivetti is a package that simply centers the text of a buffer. It is very simple and beautiful. The default width is just a bit short.
;; Minor mode for a nice writing environment
(use-package olivetti
:defer t
:bind (:map custom-bindings-map ("C-c o" . olivetti-mode))
:config
(setq-default olivetti-body-width (+ fill-column 3)))
I usually have auto-fill-mode
enabled. When visual-fill-mode
is enabled, try
to mimic how it looks when having used fill-paragraph
with adaptive-wrap
.
(use-package adaptive-wrap
:defer t
:hook (visual-line-mode . adaptive-wrap-prefix-mode))
Focus is my own package. It looks pretty nice, especially in combination with Olivetti!
;; Dim color of text in surrounding sections
(use-package focus
:defer t
:bind (:map custom-bindings-map ("C-c f" . focus-mode)))
Dashboard provides a nice welcome.
;; A startup screen extracted from Spacemacs
(use-package dashboard
:config
(setq dashboard-projects-backend 'project-el
dashboard-banner-logo-title nil
dashboard-center-content t
dashboard-set-footer nil
dashboard-page-separator "\n\n\n"
dashboard-items '((projects . 15)
(recents . 15)
(bookmarks . 5)))
(dashboard-setup-startup-hook))
I run this configuration mostly on macOS, so we need a couple of settings to
make things work smoothly. I use the Command
-key as the Meta
-key, Freeing
up the Option
-key, which I need for typing Norwegian characters on a US
keyboard. In addition, it is more comfortable.
I try to minimize the use of frames. The native compilation gives a lot of warnings, but they seem safe to ignore.
(when (memq window-system '(mac ns))
(setq mac-option-modifier nil
mac-command-modifier 'meta
ns-pop-up-frames nil
native-comp-async-report-warnings-errors nil))
The package exec-path-from-shell synchronizes environment variables from the shell to Emacs. This makes it a lot easier to deal with external programs on macOS.
(use-package exec-path-from-shell
:if (memq window-system '(mac ns))
:config
(exec-path-from-shell-initialize))
I had some problems with Dired, and this seems to have solved it. I think the solutions was from here, and my problems were related, but not the same.
(use-package ls-lisp
:ensure nil
:if (memq window-system '(mac ns))
:config
(setq ls-lisp-use-insert-directory-program nil))
It is useful to be able to occasionally open the file associated with a buffer in macOS Finder.
(use-package reveal-in-osx-finder
:if (memq window-system '(mac ns)))
Here are a list of modes that I prefer enable by default.
(dolist (mode
'(abbrev-mode ; E.g. sopl -> System.out.println
column-number-mode ; Show column number in mode line
delete-selection-mode ; Replace selected text
dirtrack-mode ; directory tracking in *shell*
global-so-long-mode ; Mitigate performance for long lines
recentf-mode ; Recently opened files
show-paren-mode)) ; Highlight matching parentheses
(funcall mode 1))
Magit is the best.
;; A Git porcelain inside Emacs.
(use-package magit
:hook ((magit-pre-refresh . diff-hl-magit-pre-refresh)
(magit-post-refresh . diff-hl-magit-post-refresh))
:bind (:map custom-bindings-map ("C-c m" . magit-status)))
Have some visual indication where there are uncommitted changes.
;; Highlight uncommitted changes using VC
(use-package diff-hl
:config
(global-diff-hl-mode 1))
(use-package project
:config
(add-to-list 'project-switch-commands '(magit-project-status "Magit" ?m)))
Some keybindings (involving the option, resulting in funny symbols) for window management.
(use-package windmove
:ensure nil
:bind (:map custom-bindings-map
("M-˙" . windmove-left)
("M-∆" . windmove-down)
("M-˚" . windmove-up)
("M-¬" . windmove-right)
("M-ó" . windmove-swap-states-left)
("M-ô" . windmove-swap-states-down)
("M-" . windmove-swap-states-up)
("M-ò" . windmove-swap-states-right)))
Using EditorConfig is a must when collaborating with others. It is also a way of having multiple tools that want to format your buffer to agree (e.g. both the language’s Emacs mode and some external formatter/prettifier).
;; EditorConfig Emacs Plugin
(use-package editorconfig
:config
(editorconfig-mode 1))
I have transitioned from Helm to Ivy, and now, on to Vertico. It improves the
interface calling commands (i.e. M-x
), finding files, switching buffers,
searching files and so on. Using the vertico-buffer-mode
gives a more
Helm-like experience, where completions are given a full fledged buffer.
;; VERTical Interactive COmpletion
(use-package vertico
:init
(vertico-mode 1)
:config
(setq vertico-count 25))
Use the built in savehist-mode
to prioritize recently used commands.
;; Save minibuffer history
(use-package savehist
:ensure nil
:init
(savehist-mode 1))
With Marginalia, we get better descriptions for commands inline.
;; Enrich existing commands with completion annotations
(use-package marginalia
:init
(marginalia-mode 1))
I used Auto-Complete for years, then I used company-mode for even more years, and now I am giving corfu a shot. I want a pretty aggressive completion system, hence the no delay settings and a short prefix length.
;; Modular text completion framework
(use-package corfu
:init
(global-corfu-mode 1)
(corfu-popupinfo-mode 1)
:config
(setq corfu-cycle t
corfu-auto t
corfu-auto-delay 0.1
corfu-auto-prefix 2
corfu-popupinfo-delay 0.5))
I use corfu in concert with orderless.
;; Emacs completion style that matches multiple regexps in any order
(use-package orderless
:config
(setq completion-styles '(orderless basic partial-completion)
completion-category-overrides '((file (styles basic partial-completion)))
orderless-component-separator "[ |]"))
The package Consult improves navigation and searching.
;; Consulting completing-read
(use-package consult
:bind (:map custom-bindings-map
("C-x b" . consult-buffer)
("C-c r" . consult-ripgrep))
:config
(setq consult-preview-key (list :debounce 0.1 'any)))
PDF Tools makes a huge improvement on the built-in doc-view-mode! Removing
the header-line-format
gives a very clean PDF-viewer; let’s add that to a
key.
;; Emacs support library for PDF files
(use-package pdf-tools
:defer t
:mode "\\.pdf\\'"
:bind (:map pdf-view-mode-map
("c" . (lambda ()
(interactive)
(if header-line-format
(setq header-line-format nil)
(nano-modeline-pdf-mode))))
("j" . pdf-view-next-line-or-next-page)
("k" . pdf-view-previous-line-or-previous-page))
:hook (pdf-view-mode
. (lambda ()
(nano-modeline-pdf-mode)
(set (make-local-variable 'meow-cursor-type-default) nil)))
:init (pdf-loader-install)
:config (add-to-list 'revert-without-query ".pdf"))
Trying out jinx in favor of the builtin flyspell.
(use-package jinx
:hook (emacs-startup . global-jinx-mode)
:bind ("C-." . jinx-correct)
:config
(setq jinx-languages "en_US nb"))
This super neat package looks up the word at point. I use it a lot!
;; display the definition of word at point
(use-package define-word
:defer t
:bind (:map custom-bindings-map ("C-c D" . define-word-at-point)))
Do you ever want to insert some Lorem ipsum?
(use-package lorem-ipsum)
Now, run M-x lorem-ipsum-insert-paragraphs
and get:
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Donec hendrerit tempor tellus. Donec pretium posuere tellus. Proin quam nisl, tincidunt et, mattis eget, convallis nec, purus. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Nulla posuere. Donec vitae dolor. Nullam tristique diam non turpis. Cras placerat accumsan nulla. Nullam rutrum. Nam vestibulum accumsan nisl.
I use Org mode extensively. Some of these configurations may be unfortunate, but it is a bit impractical to change, as I have years worth of org-files and want to avoid having to reformat a lot of files.
One example is org-adapt-indentation
, which changed default value in
version 9.5 of Org mode. Another is that I for some unknown reason decided to
content within source content not be indented by two spaces (which is the
default).
Note that I disable some safety features, so please don’t copy and paste
mindlessly (see the documentation for org-confirm-babel-evaluate
and
org-export-allow-bind-keywords
).
;; Outline-based notes management and organizer
(use-package org
:defer t
:config
(setq org-adapt-indentation t
org-hide-leading-stars t
org-hide-emphasis-markers t
org-pretty-entities t
org-src-fontify-natively t
org-startup-folded t
org-edit-src-content-indentation 0))
For LaTeX export, I default to using XeLaTeX for compilation, and the engrave-faces package for syntax highlighting source blocks after the Emacs color theme.
;; Convert font-lock faces to other formats
(use-package engrave-faces
:defer t)
I have PDFs open directly in Emacs (PDF Tools). In addition, I have support for a couple of custom LaTeX classes.
;; LaTeX Back-End for Org Export Engine
(use-package ox-latex
:ensure nil
:after org
:config
(setq org-export-allow-bind-keywords t
org-latex-src-block-backend 'engraved
org-latex-pdf-process
'("latexmk -pdflatex='xelatex -shell-escape -interaction nonstopmode' -pdf -f %f"))
(add-to-list 'org-file-apps '("\\.pdf\\'" . emacs))
(add-to-list 'org-latex-classes
'("ifimaster"
"\\documentclass{ifimaster}
[DEFAULT-PACKAGES]
[PACKAGES]
[EXTRA]
\\usepackage{babel,csquotes,ifimasterforside,url,varioref}"
("\\chapter{%s}" . "\\chapter*{%s}")
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}")
("\\paragraph{%s}" . "\\paragraph*{%s}")
("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
(add-to-list 'org-latex-classes
'("easychair" "\\documentclass{easychair}"
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}")
("\\paragraph{%s}" . "\\paragraph*{%s}")
("\\subparagraph{%s}" . "\\subparagraph*{%s}"))))
Add a few languages for Org babel. In addition, don’t evaluate code on export by default.
;; Working with Code Blocks in Org
(use-package ob
:ensure nil
:after org
:config
(setq org-export-use-babel nil
org-confirm-babel-evaluate nil)
(org-babel-do-load-languages
'org-babel-load-languages
'((emacs-lisp . t)
(python . t)
(clojure . t))))
Default to use whatever interpreter is set by python-shell-interpreter
.
;; Babel Functions for Python
(use-package ob-python
:ensure nil
:after (ob python)
:config
(setq org-babel-python-command python-shell-interpreter))
Since version 9.2 of Org mode, typing <s
to get a source block (and
similar variants) has been tucked away in the Org Tempo library, hoping that
users rather use C-c C-,
. Hopefully I’ll stop typing <s
at some point,
and adapt the much saner C-c C-,
.
;; Template expansion for Org structures
(use-package org-tempo
:ensure nil
:after org)
Touch up the appearance of org mode files with some fancy UTF-8 characters.
I disable org-modern-block-fringe
due to org-modern conflicting with
org-adapt-indentation
.
;; Modern looks for Org
(use-package org-modern
:after org
:hook (org-mode . org-modern-mode)
:config
(setq org-modern-block-fringe nil))
I guess I have to include my (semi-abandoned) mode ox-gfm for exporting org mode to GitHub Flavored Markdown.
;; Export Github Flavored Markdown from Org
(use-package ox-gfm
:after (org))
Markdown is pretty nice, especially when collaborating with others (as most
people don’t use org), and nicer still when combined with Pandoc! I set
fill-column
to 72 as it’s
;; Emacs Major mode for Markdown-formatted files
(use-package markdown-mode
:defer t
:hook (markdown-mode . (lambda () (setq fill-column 72))))
I use nix in most of my projects, to specify the programs needed in order
work on that project. In combination with direnv, these programs are only
available within those projects; that is: when I cd
into a Javascript
project, then I can call npm
, but in my system globally, there is no trace of
it. The package envrc helps Emacs and direnv play nice.
;; direnv integration
(use-package envrc
:if (executable-find "direnv")
:init
(setq envrc-debug t)
(add-hook 'after-init-hook (lambda () (envrc-global-mode 1)))
(advice-add 'cider-jack-in :around #'envrc-propagate-environment))
The ChatGPT client gptel needs an API key from the OpenAI API. This key can
be stored in your .authinfo
file by adding a line like this:
machine api.openai.com password OPEN-AI-KEY
Then the gptel-api-key
can be set using auth source.
Default to using llama3, a local LLM.
(use-package gptel
:defer t
:hook ((gptel-mode . (lambda () (visual-line-mode 1)))
(gptel-mode . (lambda () (auto-fill-mode 0))))
:config
(setq gptel-backend (gptel-make-ollama "Ollama"
:host "localhost:11434"
:stream t
:models '("llama3:8b-instruct-q8_0"))
gptel-model "llama3"
gptel-api-key (auth-source-pick-first-password
:host "api.openai.com")))
I use this all the time. Perhaps more than I should?
;; Multiple cursors for Emacs
(use-package multiple-cursors
:defer t
:hook ((multiple-cursors-mode-enabled-hook . (lambda () (corfu-mode -1)))
(multiple-cursors-mode-disabled-hook . (lambda () (corfu-mode 1))))
:bind (:map custom-bindings-map
("C-c e" . mc/edit-lines)
("C-c a" . mc/mark-all-like-this)
("C-c n" . mc/mark-next-like-this)))
This is neat, and I use it way less than I should.
;; Increase selected region by semantic units
(use-package expand-region
:bind (:map custom-bindings-map ("C-=" . er/expand-region)))
Try is my own package for trying out packages without installing them. It is the most useful of my packages (IMO).
;; Try out Emacs packages
(use-package try
:defer t)
<sec:defuns>
just-one-space
removes all whitespace around a point - giving it a negative
argument it removes newlines as well. We wrap a interactive function around
it to be able to bind it to a key. In Emacs 24.4 cycle-spacing
was
introduced, and it works like just-one-space
, but when run in succession it
cycles between one, zero and the original number of spaces.
(defun cycle-spacing-delete-newlines ()
"Removes whitespace before and after the point."
(interactive)
(if (version< emacs-version "24.4")
(just-one-space -1)
(cycle-spacing -1)))
Often I want to find other occurrences of a word I’m at, or more specifically
the symbol (or tag) I’m at. The isearch-forward-symbol-at-point
in Emacs
24.4 works well for this, but I don’t want to be bothered with the isearch
interface. Rather jump quickly between occurrences of a symbol, or if non is
found, don’t do anything.
(defun jump-to-symbol-internal (&optional backwardp)
"Jumps to the next symbol near the point if such a symbol
exists. If BACKWARDP is non-nil it jumps backward."
(let* ((point (point))
(bounds (find-tag-default-bounds))
(beg (car bounds)) (end (cdr bounds))
(str (isearch-symbol-regexp (find-tag-default)))
(search (if backwardp 'search-backward-regexp
'search-forward-regexp)))
(goto-char (if backwardp beg end))
(funcall search str nil t)
(cond ((<= beg (point) end) (goto-char point))
(backwardp (forward-char (- point beg)))
(t (backward-char (- end point))))))
(defun jump-to-previous-like-this ()
"Jumps to the previous occurrence of the symbol at point."
(interactive)
(jump-to-symbol-internal t))
(defun jump-to-next-like-this ()
"Jumps to the next occurrence of the symbol at point."
(interactive)
(jump-to-symbol-internal))
I sometimes regret killing the *scratch*
-buffer, and have realized I never
want to actually kill it. I just want to get it out of the way, and clean it
up. The function below does just this for the *scratch*
-buffer, and works
like kill-this-buffer
for any other buffer. It removes all buffer content
and buries the buffer (this means making it the least likely candidate for
other-buffer
).
(defun kill-this-buffer-unless-scratch ()
"Works like `kill-this-buffer' unless the current buffer is the
*scratch* buffer. In witch case the buffer content is deleted and
the buffer is buried."
(interactive)
(if (not (string= (buffer-name) "*scratch*"))
(kill-this-buffer)
(delete-region (point-min) (point-max))
(switch-to-buffer (other-buffer))
(bury-buffer "*scratch*")))
To duplicate either selected text or a line we define this interactive function.
(defun duplicate-thing (comment)
"Duplicates the current line, or the region if active. If an argument is
given, the duplicated region will be commented out."
(interactive "P")
(save-excursion
(let ((start (if (region-active-p) (region-beginning) (line-beginning-position)))
(end (if (region-active-p) (region-end) (line-end-position)))
(fill-column most-positive-fixnum))
(goto-char end)
(unless (region-active-p)
(newline))
(insert (buffer-substring start end))
(when comment (comment-region start end)))))
To tidy up a buffer we define this function borrowed from simenheg.
(defun tidy ()
"Ident, untabify and unwhitespacify current buffer, or region if active."
(interactive)
(let ((beg (if (region-active-p) (region-beginning) (point-min)))
(end (if (region-active-p) (region-end) (point-max))))
(indent-region beg end)
(whitespace-cleanup)
(untabify beg (if (< end (point-max)) end (point-max)))))
Org mode does currently not support synctex (which enables you to jump from a point in your TeX-file to the corresponding point in the pdf), and it seems like a tricky problem.
Calling this function from an org-buffer jumps to the corresponding section in the exported pdf (given that the pdf-file exists), using pdf-tools.
(defun org-sync-pdf ()
(interactive)
(let ((headline (nth 4 (org-heading-components)))
(pdf (concat (file-name-base (buffer-name)) ".pdf")))
(when (file-exists-p pdf)
(find-file-other-window pdf)
(pdf-links-action-perform
(cl-find headline (pdf-info-outline pdf)
:key (lambda (alist) (cdr (assoc 'title alist)))
:test 'string-equal)))))
The opposite of fill paragraph (from EmacsWiki),
(defun unfill-paragraph ()
(interactive)
(let ((fill-column most-positive-fixnum))
(fill-paragraph nil (region-active-p))))
I don’t enjoy writing out today’s date, so let’s tuck that into a function.
(defun insert-todays-date ()
(interactive)
(insert (format-time-string "%Y-%m-%d")))
An advice can be given to a function to make it behave differently. This
advice makes eval-last-sexp
(bound to C-x C-e
) replace the sexp with the
value.
(defadvice eval-last-sexp (around replace-sexp (arg) activate)
"Replace sexp when called with a prefix argument."
(if arg
(let ((pos (point)))
ad-do-it
(goto-char pos)
(backward-kill-sexp)
(forward-sexp))
ad-do-it))
When interactively changing the theme (using M-x load-theme
), the current
custom theme is not disabled. This often gives weird-looking results; we can
advice load-theme
to always disable themes currently enabled themes.
(defadvice load-theme
(before disable-before-load (theme &optional no-confirm no-enable) activate)
(mapc 'disable-theme custom-enabled-themes))
These functions provide something close to text-scale-mode
, but for every
buffer, including the minibuffer and mode line.
(let* ((default (face-attribute 'default :height))
(size default))
(defun global-scale-default ()
(interactive)
(global-scale-internal (setq size default)))
(defun global-scale-up ()
(interactive)
(global-scale-internal (setq size (+ size 20))))
(defun global-scale-down ()
(interactive)
(global-scale-internal (setq size (- size 20))))
(defun global-scale-internal (arg)
(set-face-attribute 'default (selected-frame) :height arg)
(set-transient-map
(let ((map (make-sparse-keymap)))
(define-key map (kbd "C-=") 'global-scale-up)
(define-key map (kbd "C-+") 'global-scale-up)
(define-key map (kbd "C--") 'global-scale-down)
(define-key map (kbd "C-0") 'global-scale-default) map))))
I am using eglot, which is built in from emacs 29.1. Some performance issues
led me to set eglot-events-buffer-size
to 0.
(use-package eglot
:defer t
:hook (eglot-managed-mode . (lambda ()
(eglot-inlay-hints-mode -1)
(add-hook 'before-save-hook 'eglot-format nil t)))
:config
(setq eglot-events-buffer-size 0)
(add-to-list 'eglot-server-programs
'(web-mode . ("svelteserver" "--stdio"))))
I often run latexmk -pdf -pvc
in a compilation buffer, which recompiles
the latex-file whenever it is changed. This often results in annoyingly
large compilation buffers; the following snippet limits the buffer size in
accordance with comint-buffer-maximum-size
, which defaults to 1024 lines.
(use-package comint
:ensure nil
:bind (:map comint-mode-map ("C-l" . comint-clear-buffer))
:hook (comint-mode . (lambda () (auto-fill-mode -1)))
:config (add-hook 'compilation-filter-hook 'comint-truncate-buffer))
vterm is a fully capable terminal emulator, and I use it exclusively.
Inspired by torenord, I maintain quick access to vterm buffers with bindings
M-1
to M-9
. In addition, the C-z
toggles between the last visited vterm, and
the last visited non-vterm buffer.
Fresh vterm buffers spawns with the directory given by vc-root-dir
if it
exists and default-directory
otherwise.
;; A terminal via libvterm
(use-package vterm
:defer t
:preface
(defvar vterms nil)
(defun toggle-vterm (&optional n)
(interactive)
(setq vterms (seq-filter 'buffer-live-p vterms))
(let ((default-directory (or (vc-root-dir) default-directory)))
(cond ((numberp n) (push (vterm n) vterms))
((null vterms) (push (vterm 1) vterms))
((seq-contains-p vterms (current-buffer))
(switch-to-buffer (car (seq-difference (buffer-list) vterms))))
(t (switch-to-buffer (car (seq-intersection (buffer-list) vterms)))))))
:bind (:map custom-bindings-map
("C-z" . toggle-vterm)
("M-1" . (lambda () (interactive) (toggle-vterm 1)))
("M-2" . (lambda () (interactive) (toggle-vterm 2)))
("M-3" . (lambda () (interactive) (toggle-vterm 3)))
("M-4" . (lambda () (interactive) (toggle-vterm 4)))
("M-5" . (lambda () (interactive) (toggle-vterm 5)))
("M-6" . (lambda () (interactive) (toggle-vterm 6)))
("M-7" . (lambda () (interactive) (toggle-vterm 7)))
("M-8" . (lambda () (interactive) (toggle-vterm 8)))
("M-9" . (lambda () (interactive) (toggle-vterm 9))))
:config
;; Don't query about killing vterm buffers, just kill it
(defadvice vterm (after kill-with-no-query nil activate)
(set-process-query-on-exit-flag (get-buffer-process ad-return-value) nil)))
I use Paredit when editing lisp code, we enable this for all lisp-modes.
Paredit version 25 seems to interfere with REPL-modes, and unbinding RET
is the proposed fix.
;; minor mode for editing parentheses
(use-package paredit
:defer t
:bind (:map paredit-mode-map ("RET" . nil))
:hook ((cider-repl-mode
clojure-mode
ielm-mode
racket-mode
racket-repl-mode
slime-repl-mode
lisp-mode
emacs-lisp-mode
lisp-interaction-mode
scheme-mode)
. paredit-mode))
In emacs-lisp-mode
we can enable eldoc-mode
to display information
about a function or a variable in the echo area.
(add-hook 'emacs-lisp-mode-hook 'turn-on-eldoc-mode)
(add-hook 'lisp-interaction-mode-hook 'turn-on-eldoc-mode)
A very simple setup for Clojure. Cider works pretty much out of the box!
(use-package clojure-mode
:config
(setq clojure-toplevel-inside-comment-form t)
(define-clojure-indent
(match 1)))
;; Clojure Interactive Development Environment
(use-package cider
:defer t
:bind (:map cider-repl-mode-map ("C-l" . cider-repl-clear-buffer))
:config
(setq cider-save-file-on-load t
cider-repl-pop-to-buffer-on-connect nil))
;; Commands for refactoring Clojure code
(use-package clj-refactor
:hook (cider-mode . clj-refactor-mode)
:defer t)
A minimal setup for Racket.
;; Major mode for Racket language
(use-package racket-mode
:defer t)
Note that I haven’t used Common Lisp for a very long time, and this setup might be broken. I keep it around for reference.
I use Slime along with lisp-mode
to edit Common Lisp code. Slime provides
code evaluation and other great features, a must have for a Common Lisp
developer. You can install the Common Lisp slime counterpart using
Quicklisp, creating a helper that can be loaded.
We can specify what Common Lisp program Slime should use (I use SBCL). More
sensible loop
indentation is borrowed from simenheg.
;; Superior Lisp Interaction Mode for Emacs
(use-package slime
:disabled
:defer t
:bind (:map slime-repl-mode-map ("C-l" . slime-repl-clear-buffer))
:hook (common-lisp-mode . activate-slime-helper)
:config
(when (file-exists-p "~/.quicklisp/slime-helper.el")
(load (expand-file-name "~/.quicklisp/slime-helper.el")))
(setq inferior-lisp-program "sbcl")
(setq lisp-loop-forms-indentation 6
lisp-simple-loop-indentation 2
lisp-loop-keyword-indentation 6))
(setq python-shell-interpreter "python3.11")
(add-hook 'python-mode-hook
(lambda () (setq forward-sexp-function nil)))
The c-mode-common-hook
is a general hook that work on all C-like languages
(C, C++, Java, etc…). I like being able to quickly compile using C-c C-c
(instead of M-x compile
), a habit from latex-mode
.
(defun c-setup ()
(local-set-key (kbd "C-c C-c") 'compile))
(add-hook 'c-mode-hook 'c-setup)
Some statements in Java appear often, and become tedious to write out. We can use abbrevs to speed this up.
(define-abbrev-table 'java-mode-abbrev-table
'(("psv" "public static void main(String[] args) {" nil 0)
("sopl" "System.out.println" nil 0)
("sop" "System.out.printf" nil 0)))
To be able to use the abbrev table defined above, abbrev-mode
must be
activated.
(add-hook 'java-mode-hook 'eglot-ensure)
(use-package kotlin-mode
:hook (kotlin-mode . eglot-ensure))
When writing assembler code I use #
for comments. By defining
comment-start
we can add comments using M-;
like in other programming
modes. Also in assembler should one be able to compile using C-c C-c
.
(defun asm-setup ()
(setq comment-start "#")
(local-set-key (kbd "C-c C-c") 'compile))
(add-hook 'asm-mode-hook 'asm-setup)
;; Integrated environment for *TeX*
(use-package auctex)
Erlang mode works out of the box.
;; Erlang major mode
(use-package erlang
:defer t)
;; Major mode for editing .nix files
(use-package nix-mode
:defer t
:hook (nix-mode . eglot-ensure))
haskell-doc-mode
is similar to eldoc
, it displays documentation in the
echo area. Haskell has several indentation modes - I prefer using
haskell-indent
.
;; A Haskell editing mode
(use-package haskell-mode
:defer t
:hook ((haskell-mode . interactive-haskell-mode)
(haskell-mode . turn-on-haskell-doc-mode)
(haskell-mode . turn-on-haskell-indent)))
Use ---
for comments in Maude.
;; Emacs mode for the programming language Maude
(use-package maude-mode
:defer t
:hook (maude-mode . (lambda () (setq-local comment-start "---")))
:config
(add-to-list 'maude-command-options "-no-wrap"))
Provide a default compile-command
.
(defun minizinc-setup-compile-command ()
(let ((command (concat "minizinc " (buffer-file-name) " "))
(f (concat (file-name-base (buffer-file-name)) ".dzn")))
(local-set-key (kbd "C-c C-c") 'recompile)
(setq-local compile-command (concat command (if (file-exists-p f) f "")))))
Use minizinc-mode
, and hook up the minizinc-setup-compile-command
above.
;; Major mode for MiniZinc code
(use-package minizinc-mode
:disabled
:defer t
:mode "\\.mzn\\'"
:hook (minizinc-mode . minizinc-setup-compile-command))
Proof General is really great for working with proof assistants. I have only tried it with Coq.
;; A generic Emacs interface for proof assistants
(use-package proof-general
:disabled
:defer t)
For completions, I use company-coq.
;; A collection of extensions PG's Coq mode
(use-package company-coq
:disabled
:defer t
:hook (coq-mode . company-coq-mode))
;; Rust development environment
(use-package rustic
:defer t
:config
(setq rustic-lsp-client 'eglot))
;; Major mode for the Go programming language
(use-package go-mode
:defer t
:mode "\\.go\\'"
:hook (go-mode . eglot-ensure))
;; a major-mode for editing Lua scripts
(use-package lua-mode
:defer t)
My webdev setup isn’t much, but with eglot and Tree-sitter, I don’t find myself missing much. It depends on Tree-sitter, which was added in emacs 29.1.
;; Major mode for editing JavaScript
(use-package js
:ensure nil
:defer t
:mode "\\.jsx?\\'"
:hook (js-ts-mode . eglot-ensure))
Similarly for TypeScript.
;; tree sitter support for TypeScript
(use-package typescript-ts-mode
:ensure nil
:defer t
:mode "\\.tsx?\\'"
:hook (tsx-ts-mode . eglot-ensure))
I am using Svelte for some projects, where I find web-mode along with the Svelte Language Server to work well.
(use-package web-mode
:defer t
:mode "\\.svelte\\'"
:hook (web-mode . eglot-ensure)
:config
(add-to-list 'web-mode-engines-alist '("svelte" . "\\.svelte\\'")))
(use-package bqn-mode
:bind (:map bqn-mode-map ("C-c C-c" . bqn-comint-send-dwim))
:hook (bqn-mode . (lambda () (set-input-method "BQN-Z"))))
I mostly use Z3 as a Python library, but occasionally I’ll run some SMT-LIB code directly.
;; z3/SMTLIBv2 interactive development
(use-package z3-mode
:disabled
:defer t)
(use-package swift-mode
:hook (swift . auto-revert-mode))
Which key is nice for discoverability.
;; Display available keybindings in popup
(use-package which-key
:config
(which-key-mode 1))
(use-package emacs
:bind (:map custom-bindings-map
("M-u" . upcase-dwim)
("M-c" . capitalize-dwim)
("M-l" . downcase-dwim)
("M-]" . other-frame)
("C-j" . newline-and-indent)
("C-c s" . ispell-word)
("C-c v" . visible-mode)))
(use-package emacs
:bind (("M-p" . jump-to-previous-like-this)
("M-n" . jump-to-next-like-this)
:map custom-bindings-map
("M-," . jump-to-previous-like-this)
("M-." . jump-to-next-like-this)
("C-x k" . kill-this-buffer-unless-scratch)
("C-c C-0" . global-scale-default)
("C-c C-=" . global-scale-up)
("C-c C-+" . global-scale-up)
("C-c C--" . global-scale-down)
("C-c j" . cycle-spacing-delete-newlines)
("C-c d" . duplicate-thing)
("<C-tab>" . tidy)
("C-c t" . insert-todays-date)
("C-c q" . unfill-paragraph))
:config
(define-key custom-bindings-map (kbd "C-c .") (cycle-themes)))
Lastly we need to activate the map by creating and activating the
minor-mode
.
(define-minor-mode custom-bindings-mode
"A mode that activates custom-bindings."
:init-value t
:keymap custom-bindings-map)
My Emacs configurations written in Org mode.
Copyright (c) 2013 - 2023 Lars Tveito
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.