/*
- Author: William Stillwell ( KI4SWY // Hamster )
-
* Also author of the romident.coinopflorida.com website. - Description: USB to Fluke 9100, 9105, 9110FT etc,
- Version: Public Release 2018.01.23
- Donations Welcome :)
- Hardware Requirements
- Teensy 3.6 ( pjrc or digikey part # 1568-1442-ND ) -- MUST BE a Teensy 3.6
- Logic Level Converter - Bi Directional ( SparkFun ) or Digikey ( 1568-1209-ND ) ~ Or make your own.
- USB Header ( pjrc or Digikey Part # ED2989-ND ) ( or cut the end of the keyboard cable off )
- 5pin Dinn Connector ( Digikey Part # SC1605-ND )
- Library requirements:
- https://github.com/PaulStoffregen/USBHost_t36
- ^ download the zip and install it via the Library - > Install option.
- ^ Tested Version has been saved in this Repository
- ^ I also have forked the working branch to my github.
- Wiring Pinout:
- Fluke DIN 5:
-
Pin 1: Not Used ( /KBDATA ) -
Pin 2: KBData ( To HV1 input of Logic Level Converter ) -
Pin 3: KBrst ( To HV2 input of Logic Level Converter ) -
Pin 4: GND ( to GND on Logic Level Converter and GND on Teensy 3.6 ) -
Pin 5: +5v ( to HV on Loic Level Converter and +5v on Teensy 3.6 ) - Teensy 3.6 ( PJRC or Digikey )
-
+5v to Pin 5 on Fluke 5pin DIN & HV on Loic Level Converter -
+3.3V to LV on Logic Level Converter -
Input 0 to LV2 on Logic Level Convert ( Reset in , On Active Low, Fluke sent Reset ) -
Output 8 ( Serial 3 TX ) to LV1 on Logic Level Converter ( KB Data Out ) -
USB HOST port ( 5+, D+, D-, and GND ) to USB Keyboard - Keyboard Mapping:
-
ALT+F1 = Field Select -
ALT+F2 = Edit -
ALT+F3 = Quit -
ALT+F4 = Msgs -
ALT+F5 = Help -
ALT+F6 = Info -
ALT+F7 = Begin File -
ALT+F8 = End File -
ALT+F9 = Scroll Forward [ May map Page Up for this in Future Version ] -
ALT+F10= Scroll Backward [ May map Page Down for this in Future Version ] -
ALT+F11 = Begin Line -
ALT+F12 = End Line - Note, ALl CTRL+, SHIFT+ commands key combos are supported.
- ToDo:
-
Enable Number Pad / Num Lock, Currently Number pad does do anything
*/