- Why do we need this AsyncUDP_ESP32_SC_ENC library
- Changelog
- Prerequisites
- Installation
- Libraries' Patches
- HOWTO Fix
Multiple Definitions
Linker Error - HOWTO Use analogRead() with ESP32 running WiFi and/or BlueTooth (BT/BLE)
- HOWTO Setting up the Async UDP Client
- How to connect ENC28J60 to ESP32_S2/S3/C3
- Examples
- Example AsyncUdpNTPClient
- Debug Terminal Output Samples
- Debug
- Troubleshooting
- Issues
- TO DO
- DONE
- Contributions and Thanks
- Contributing
- License
- Copyright
Why do we need this AsyncUDP_ESP32_SC_ENC library
This AsyncUDP_ESP32_SC_ENC library is a fully asynchronous UDP library, designed for a trouble-free, multi-connection network environment, for ESP32_S2/S3/C3
boards using LwIP
ENC28J60 Ethernet. The library is easy to use and includes support for Unicast, Broadcast and Multicast environments.
This library is based on, modified from:
to apply the better and faster asynchronous feature of the powerful AsyncUDP into ESP32_S2/S3/C3
boards using LwIP
ENC28J60 Ethernet.
- Using asynchronous network means that you can handle more than one connection at the same time
- You are called once the request is ready and parsed
- When you send the response, you are immediately ready to handle other connections while the server is taking care of sending the response in the background
- Speed is OMG
- After connecting to a UDP server as an Async Client, you are immediately ready to handle other connections while the Client is taking care of receiving the UDP responding packets in the background.
- You are not required to check in a tight loop() the arrival of the UDP responding packets to process them.
- ESP32_S3-based boards (ESP32S3_DEV, ESP32_S3_BOX, UM TINYS3, UM PROS3, UM FEATHERS3, etc.)
- ESP32-S2 (ESP32-S2 Saola, AI-Thinker ESP-12K, etc.)
- ESP32-C3 (ARDUINO_ESP32C3_DEV, etc.)
using LwIP
ENC28J60 Ethernet
FULL_DUPLEX, 10Mbps
Arduino IDE 1.8.19+
for ArduinoESP32 Core 2.0.5+
for ESP32-based boards.WebServer_ESP32_SC_ENC library 1.2.0+
. To install, check
The suggested way to install is to:
The best way is to use Arduino Library Manager
. Search for AsyncUDP_ESP32_SC_ENC
, then select / install the latest version. You can also use this link for more detailed instructions.
- Navigate to AsyncUDP_ESP32_SC_ENC page.
- Download the latest release
AsyncUDP_ESP32_SC_ENC-main.zip
. - Extract the zip file to
AsyncUDP_ESP32_SC_ENC-main
directory - Copy the whole
AsyncUDP_ESP32_SC_ENC-main
folder to Arduino libraries' directory such as~/Arduino/libraries/
.
- Install VS Code
- Install PlatformIO
- Install AsyncUDP_ESP32_SC_ENC library by using Library Manager. Search for AsyncUDP_ESP32_SC_ENC in Platform.io Author's Libraries
- Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File
To fix ESP32 compile error
, just copy the following file into the ESP32
cores/esp32 directory (e.g. ./arduino-1.8.19/hardware/espressif/cores/esp32) to overwrite the old file:
The current library implementation, using xyz-Impl.h
instead of standard xyz.cpp
, possibly creates certain Multiple Definitions
Linker error in certain use cases.
You can include this .hpp
file
// Can be included as many times as necessary, without `Multiple Definitions` Linker Error
#include "AsyncUDP_ESP32_SC_ENC.hpp" //https://github.com/khoih-prog/AsyncUDP_ESP32_SC_ENC
in many files. But be sure to use the following .h
file in just 1 .h
, .cpp
or .ino
file, which must not be included in any other file, to avoid Multiple Definitions
Linker Error
// To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error
#include "AsyncUDP_ESP32_SC_ENC.h" //https://github.com/khoih-prog/AsyncUDP_ESP32_SC_ENC
Check the new multiFileProject example for a HOWTO
demo.
Please have a look at ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to have more detailed description and solution of the issue.
ADC1
controlsADC
function for pins GPIO32-GPIO39ADC2
controlsADC
function for pins GPIO0, 2, 4, 12-15, 25-27
Look in file adc_common.c
In ADC2, there're two locks used for different cases:
lock shared with app and Wi-Fi: ESP32: When Wi-Fi using the ADC2, we assume it will never stop, so app checks the lock and returns immediately if failed. ESP32S2: The controller's control over the ADC is determined by the arbiter. There is no need to control by lock.
lock shared between tasks: when several tasks sharing the ADC2, we want to guarantee all the requests will be handled. Since conversions are short (about 31us), app returns the lock very soon, we use a spinlock to stand there waiting to do conversions one by one.
adc2_spinlock should be acquired first, then adc2_wifi_lock or rtc_spinlock.
- In order to use
ADC2
for other functions, we have to acquire complicated firmware locks and very difficult to do - So, it's not advisable to use
ADC2
with WiFi/BlueTooth (BT/BLE). - Use
ADC1
, and pins GPIO32-GPIO39 - If somehow it's a must to use those pins serviced by
ADC2
(GPIO0, 2, 4, 12, 13, 14, 15, 25, 26 and 27), use the fix mentioned at the end of ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to work with ESP32 WiFi/BlueTooth (BT/BLE).
#if !( defined(ESP32) )
#error This code is designed for (ESP32_S2/S3/C3 + LwIP ENC28J60) to run on ESP32 platform! Please check your Tools->Board setting.
#endif
#include <Arduino.h>
#define ASYNC_UDP_ESP32_SC_ENC_DEBUG_PORT Serial
// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_UDP_ESP32_SC_ENC_LOGLEVEL_ 2
//////////////////////////////////////////////////////////
// For ESP32-S3
// Optional values to override default settings
//#define ETH_SPI_HOST SPI2_HOST
//#define SPI_CLOCK_MHZ 8
// Must connect INT to GPIOxx or not working
//#define INT_GPIO 4
//#define MISO_GPIO 13
//#define MOSI_GPIO 11
//#define SCK_GPIO 12
//#define CS_GPIO 10
// For ESP32_C3
// Optional values to override default settings
// Don't change unless you know what you're doing
//#define ETH_SPI_HOST SPI2_HOST
//#define SPI_CLOCK_MHZ 8
// Must connect INT to GPIOxx or not working
//#define INT_GPIO 10
//#define MISO_GPIO 5
//#define MOSI_GPIO 6
//#define SCK_GPIO 4
//#define CS_GPIO 7
//////////////////////////////////////////////////////////
#include <AsyncUDP_ESP32_SC_ENC.h>
/////////////////////////////////////////////
// Enter a MAC address and IP address for your controller below.
#define NUMBER_OF_MAC 20
byte mac[][NUMBER_OF_MAC] =
{
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 },
};
// Select the IP address according to your local network
IPAddress myIP(192, 168, 2, 232);
IPAddress myGW(192, 168, 2, 1);
IPAddress mySN(255, 255, 255, 0);
// Google DNS Server IP
IPAddress myDNS(8, 8, 8, 8);
/////////////////////////////////////////////
#include <time.h>
// 0.ca.pool.ntp.org
IPAddress timeServerIP = IPAddress(208, 81, 1, 244);
// time.nist.gov
//IPAddress timeServerIP = IPAddress(132, 163, 96, 1);
#define NTP_REQUEST_PORT 123
char ReplyBuffer[] = "ACK"; // a string to send back
char timeServer[] = "time.nist.gov"; // NTP server
const int NTP_PACKET_SIZE = 48; // NTP timestamp is in the first 48 bytes of the message
byte packetBuffer[NTP_PACKET_SIZE]; // buffer to hold incoming and outgoing packets
// A UDP instance to let us send and receive packets over UDP
AsyncUDP Udp;
void sendACKPacket(void)
{
Serial.println("============= sendACKPacket =============");
// Send unicast ACK to the same remoteIP and remotePort we received the packet
// The AsyncUDP_STM32 library will take care of the correct IP and port based on pcb
Udp.write((uint8_t *) ReplyBuffer, sizeof(ReplyBuffer));
}
// send an NTP request to the time server at the given address
void createNTPpacket(void)
{
Serial.println("============= createNTPpacket =============");
// set all bytes in the buffer to 0
memset(packetBuffer, 0, NTP_PACKET_SIZE);
// Initialize values needed to form NTP request
// (see URL above for details on the packets)
packetBuffer[0] = 0b11100011; // LI, Version, Mode
packetBuffer[1] = 0; // Stratum, or type of clock
packetBuffer[2] = 6; // Polling Interval
packetBuffer[3] = 0xEC; // Peer Clock Precision
// 8 bytes of zero for Root Delay & Root Dispersion
packetBuffer[12] = 49;
packetBuffer[13] = 0x4E;
packetBuffer[14] = 49;
packetBuffer[15] = 52;
}
void sendNTPPacket(void)
{
createNTPpacket();
//Send unicast
Udp.write(packetBuffer, sizeof(packetBuffer));
}
void parsePacket(AsyncUDPPacket packet)
{
struct tm ts;
char buf[80];
memcpy(packetBuffer, packet.data(), sizeof(packetBuffer));
Serial.print("Received UDP Packet Type: ");
Serial.println(packet.isBroadcast() ? "Broadcast" : packet.isMulticast() ? "Multicast" : "Unicast");
Serial.print("From: ");
Serial.print(packet.remoteIP());
Serial.print(":");
Serial.print(packet.remotePort());
Serial.print(", To: ");
Serial.print(packet.localIP());
Serial.print(":");
Serial.print(packet.localPort());
Serial.print(", Length: ");
Serial.print(packet.length());
Serial.println();
unsigned long highWord = word(packetBuffer[40], packetBuffer[41]);
unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]);
// combine the four bytes (two words) into a long integer
// this is NTP time (seconds since Jan 1 1900):
unsigned long secsSince1900 = highWord << 16 | lowWord;
Serial.print(F("Seconds since Jan 1 1900 = "));
Serial.println(secsSince1900);
// now convert NTP time into )everyday time:
Serial.print(F("Epoch/Unix time = "));
// Unix time starts on Jan 1 1970. In seconds, that's 2208988800:
const unsigned long seventyYears = 2208988800UL;
// subtract seventy years:
unsigned long epoch = secsSince1900 - seventyYears;
time_t epoch_t = epoch; //secsSince1900 - seventyYears;
// print Unix time:
Serial.println(epoch);
// print the hour, minute and second:
Serial.print(F("The UTC/GMT time is ")); // UTC is the time at Greenwich Meridian (GMT)
ts = *localtime(&epoch_t);
strftime(buf, sizeof(buf), "%a %Y-%m-%d %H:%M:%S %Z", &ts);
Serial.println(buf);
// send a reply, to the IP address and port that sent us the packet we received
sendACKPacket();
}
void setup()
{
Serial.begin(115200);
while (!Serial && (millis() < 5000));
delay(500);
Serial.print(F("\nStart AsyncUDPSendReceive on "));
Serial.print(ARDUINO_BOARD);
Serial.print(F(" with "));
Serial.println(SHIELD_TYPE);
Serial.println(WEBSERVER_ESP32_SC_ENC_VERSION);
Serial.println(ASYNC_UDP_ESP32_SC_ENC_VERSION);
Serial.setDebugOutput(true);
UDP_LOGWARN(F("Default SPI pinout:"));
UDP_LOGWARN1(F("SPI_HOST:"), ETH_SPI_HOST);
UDP_LOGWARN1(F("MOSI:"), MOSI_GPIO);
UDP_LOGWARN1(F("MISO:"), MISO_GPIO);
UDP_LOGWARN1(F("SCK:"), SCK_GPIO);
UDP_LOGWARN1(F("CS:"), CS_GPIO);
UDP_LOGWARN1(F("INT:"), INT_GPIO);
UDP_LOGWARN1(F("SPI Clock (MHz):"), SPI_CLOCK_MHZ);
UDP_LOGWARN(F("========================="));
///////////////////////////////////
// To be called before ETH.begin()
ESP32_ENC_onEvent();
// start the ethernet connection and the server:
// Use DHCP dynamic IP and random mac
uint16_t index = millis() % NUMBER_OF_MAC;
//bool begin(int MISO_GPIO, int MOSI_GPIO, int SCLK_GPIO, int CS_GPIO, int INT_GPIO, int SPI_CLOCK_MHZ,
// int SPI_HOST, uint8_t *ENC28J60_Mac = ENC28J60_Default_Mac);
//ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, ETH_SPI_HOST );
ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, ETH_SPI_HOST, mac[index] );
// Static IP, leave without this line to get IP via DHCP
//bool config(IPAddress local_ip, IPAddress gateway, IPAddress subnet, IPAddress dns1 = 0, IPAddress dns2 = 0);
//ETH.config(myIP, myGW, mySN, myDNS);
ESP32_ENC_waitForConnect();
///////////////////////////////////
// Client address
Serial.print("AsyncUDPSendReceive started @ IP address: ");
Serial.println(ETH.localIP());
Serial.println(F("\nStarting connection to server..."));
//NTP requests are to port NTP_REQUEST_PORT = 123
if (Udp.connect(timeServerIP, NTP_REQUEST_PORT))
{
Serial.println("UDP connected");
Udp.onPacket([](AsyncUDPPacket packet)
{
parsePacket(packet);
});
}
}
void loop()
{
sendNTPPacket();
// wait 60 seconds before asking for the time again
delay(60000);
}
You can change the INT
pin to another one. Default is GPIO4
// Must connect INT to GPIOxx or not working
#define INT_GPIO 4
ENC28J60 | <---> | ESP32_S3 |
---|---|---|
MOSI | <---> | GPIO11 |
MISO | <---> | GPIO13 |
SCK | <---> | GPIO12 |
SS | <---> | GPIO10 |
INT | <---> | GPIO4 |
RST | <---> | RST |
GND | <---> | GND |
3.3V | <---> | 3.3V |
You can change the INT
pin to another one. Default is GPIO4
// Must connect INT to GPIOxx or not working
#define INT_GPIO 4
ENC28J60 | <---> | ESP32_S2 |
---|---|---|
MOSI | <---> | GPIO35 |
MISO | <---> | GPIO37 |
SCK | <---> | GPIO36 |
SS | <---> | GPIO34 |
INT | <---> | GPIO4 |
RST | <---> | RST |
GND | <---> | GND |
3.3V | <---> | 3.3V |
You can change the INT
pin to another one. Default is GPIO4
// Must connect INT to GPIOxx or not working
#define INT_GPIO 10
ENC28J60 | <---> | ESP32_C3 |
---|---|---|
MOSI | <---> | GPIO6 |
MISO | <---> | GPIO5 |
SCK | <---> | GPIO4 |
SS | <---> | GPIO7 |
INT | <---> | GPIO10 |
RST | <---> | RST |
GND | <---> | GND |
3.3V | <---> | 3.3V |
- AsyncUDPClient
- AsyncUdpNTPClient
- AsyncUdpSendReceive
- AsyncUDPServer
- AsyncUDPMulticastServer
- multiFileProject
Example AsyncUdpNTPClient
AsyncUDP_ESP32_SC_ENC/examples/AsyncUdpNTPClient/AsyncUdpNTPClient.ino
Lines 11 to 262 in d99c333
This is terminal debug output when running AsyncUdpNTPClient on ESP32S3_DEV (ESP32S3_DEV + LwIP ENC28J60). It connects to NTP Server using AsyncUDP_ESP32_SC_ENC library, and requests NTP time every 60s. The packet is then received and processed asynchronously to print current UTC/GMT time.
Start AsyncUdpNTPClient on ESP32S3_DEV with ESP32_S3_ENC28J60
WebServer_ESP32_SC_ENC v1.2.0 for core v2.0.0+
AsyncUDP_ESP32_SC_ENC v2.1.0 for core v2.0.0+
[UDP] Default SPI pinout:
[UDP] SPI_HOST: 1
[UDP] MOSI: 11
[UDP] MISO: 13
[UDP] SCK: 12
[UDP] CS: 10
[UDP] INT: 4
[UDP] SPI Clock (MHz): 8
[UDP] =========================
ETH Started
ETH Connected
ETH MAC: DE:AD:BE:EF:BE:04, IPv4: 192.168.2.105
FULL_DUPLEX, 10Mbps
AsyncUdpNTPClient started @ IP address: 192.168.2.105
UDP connected
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.105:59019, Length: 48
Seconds since Jan 1 1900 = 3880658248
Epoch/Unix time = 1671669448
The UTC/GMT time is Thu 2022-12-22 00:37:28 GMT
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.105:59019, Length: 48
Seconds since Jan 1 1900 = 3880658308
Epoch/Unix time = 1671669508
The UTC/GMT time is Thu 2022-12-22 00:38:28 GMT
This is terminal debug output when running AsyncUDPSendReceive on ESP32S3_DEV (ESP32S3_DEV + LwIP ENC28J60). It connects to NTP Server 0.ca.pool.ntp.org
(IP=208.81.1.244) using AsyncUDP_ESP32_SC_ENC
library, and requests NTP time every 60s. The packet is received and processed asynchronously to print current UTC/GMT time. The ACK packet is then sent.
Start AsyncUDPSendReceive on ESP32S3_DEV with ESP32_S3_ENC28J60
WebServer_ESP32_SC_ENC v1.2.0 for core v2.0.0+
AsyncUDP_ESP32_SC_ENC v2.1.0 for core v2.0.0+
[UDP] Default SPI pinout:
[UDP] SPI_HOST: 1
[UDP] MOSI: 11
[UDP] MISO: 13
[UDP] SCK: 12
[UDP] CS: 10
[UDP] INT: 4
[UDP] SPI Clock (MHz): 8
[UDP] =========================
ETH Started
ETH Connected
ETH MAC: DE:AD:BE:EF:FE:11, IPv4: 192.168.2.101
FULL_DUPLEX, 10Mbps
AsyncUDPSendReceive started @ IP address: 192.168.2.101
Starting connection to server...
UDP connected
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.101:59020, Length: 48
Seconds since Jan 1 1900 = 3880658308
Epoch/Unix time = 1671669508
The UTC/GMT time is Thu 2022-12-22 00:38:28 GMT
============= sendACKPacket =============
This is terminal debug output when running AsyncUdpNTPClient on ESP32_C3_ENC28J60 (ESP32C3_DEV + ENC28J60). It connects to NTP Server 0.ca.pool.ntp.org
(IP=208.81.1.244) using AsyncUDP_ESP32_SC_ENC
library, and requests NTP time every 60s. The packet is received and processed asynchronously to print current UTC/GMT
time
Start AsyncUdpNTPClient on ESP32C3_DEV with ESP32_C3_ENC28J60
WebServer_ESP32_SC_ENC v1.2.0 for core v2.0.0+
AsyncUDP_ESP32_SC_ENC v2.1.0 for core v2.0.0+
[UDP] Default SPI pinout:
[UDP] SPI_HOST: 1
[UDP] MOSI: 6
[UDP] MISO: 5
[UDP] SCK: 4
[UDP] CS: 7
[UDP] INT: 10
[UDP] SPI Clock (MHz): 8
[UDP] =========================
Using built-in mac_eth = 7C:DF:A1:DA:66:87
ETH Started
ETH Connected
ETH MAC: 7C:DF:A1:DA:66:87, IPv4: 192.168.2.136
FULL_DUPLEX, 10Mbps
AsyncUdpNTPClient started @ IP address: 192.168.2.136
UDP connected
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.136:59015, Length: 48
Seconds since Jan 1 1900 = 3880658068
Epoch/Unix time = 1671669268
The UTC/GMT time is Thu 2022-12-22 00:34:28 GMT
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.136:59015, Length: 48
Seconds since Jan 1 1900 = 3880658128
Epoch/Unix time = 1671669328
The UTC/GMT time is Thu 2022-12-22 00:35:28 GMT
This is terminal debug output when running AsyncUdpNTPClient on ESP32_S2_ENC28J60 (ESP32S2_DEV + ENC28J60). It connects to NTP Server 0.ca.pool.ntp.org
(IP=208.81.1.244) using AsyncUDP_ESP32_SC_W5500
library, and requests NTP time every 60s. The packet is received and processed asynchronously to print current UTC/GMT
time
Start AsyncUdpNTPClient on ESP32S2_DEV with ESP32_S2_ENC28J60
WebServer_ESP32_SC_ENC v1.2.0 for core v2.0.0+
AsyncUDP_ESP32_SC_ENC v2.1.0 for core v2.0.0+
[UDP] Default SPI pinout:
[UDP] SPI_HOST: 2
[UDP] MOSI: 35
[UDP] MISO: 37
[UDP] SCK: 36
[UDP] CS: 34
[UDP] INT: 4
[UDP] SPI Clock (MHz): 8
[UDP] =========================
Using built-in mac_eth = 7E:DF:A1:08:32:C9
ETH Started
ETH Connected
ETH MAC: 7E:DF:A1:08:32:C9, IPv4: 192.168.2.133
FULL_DUPLEX, 10Mbps
AsyncUdpNTPClient started @ IP address: 192.168.2.133
UDP connected
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.133:59016, Length: 48
Seconds since Jan 1 1900 = 3880658188
Epoch/Unix time = 1671669388
The UTC/GMT time is Thu 2022-12-22 00:36:28 GMT
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.133:59016, Length: 48
Seconds since Jan 1 1900 = 3880658248
Epoch/Unix time = 1671669448
The UTC/GMT time is Thu 2022-12-22 00:37:28 GMT
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.133:59016, Length: 48
Seconds since Jan 1 1900 = 3880658308
Epoch/Unix time = 1671669508
The UTC/GMT time is Thu 2022-12-22 00:38:28 GMT
Debug is enabled by default on Serial. To disable, use level 0
#define ASYNC_UDP_ESP32_SC_ENC_DEBUG_PORT Serial
// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_UDP_ESP32_SC_ENC_LOGLEVEL_ 1
You can also change the debugging level from 0 to 4
#define ASYNC_UDP_ESP32_SC_ENC_DEBUG_PORT Serial
// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_UDP_ESP32_SC_ENC_LOGLEVEL_ 4
If you get compilation errors, more often than not, you may need to install a newer version of Arduino IDE, the Arduino STM32
core or depending libraries.
Sometimes, the library will only work if you update the STM32
core to the latest version because I am always using the latest cores /libraries.
Submit issues to: AsyncUDP_ESP32_SC_ENC issues
- Fix bug. Add enhancement
- Add support to more
LwIP Ethernet
shields
- Initial port to
ESP32_S3_ENC28J60
(ESP32_S3 + LwIP ENC28J60) - Use
allman astyle
and addutils
. Restyle the library - Add support to
ESP32_S2
andESP32_C3
usingLwIP ENC28J60
- Based on and modified from Hristo Gochkov's AsyncUDP. Many thanks to Hristo Gochkov for great AsyncUDP Library
- Thanks to tobozo to make the library ESP32-ENC28J60 from which this library uses some ideas and codes
![]() ⭐️⭐️ Hristo Gochkov |
![]() tobozo |
If you want to contribute to this project:
- Report bugs and errors
- Ask for enhancements
- Create issues and pull requests
- Tell other people about this library
- The library is licensed under GPLv3
Copyright (c) 2018- Hristo Gochkov
Copyright (c) 2022- Khoi Hoang