-
Hello, I only have the alarm unit, is there a way to integrate it without the hub? I tried but home assistant goes into loop. Thank you very much |
Beta Was this translation helpful? Give feedback.
Replies: 8 comments 14 replies
-
hello, |
Beta Was this translation helpful? Give feedback.
-
Thank you very much gicamm, I managed to set it up! One request if possible: It would be useful to have as sensor in HA the door and window sensors connected to the alarm so that automation can be created. Thanks. |
Beta Was this translation helpful? Give feedback.
-
Great. |
Beta Was this translation helpful? Give feedback.
-
Hi maurilloh, |
Beta Was this translation helpful? Give feedback.
-
Hi Gicamm, I noticed that when I activate the Home Assistant integration, it restarts 2/3/4 times a day, not immediately but during the day. Disabling the integration does not happen, so there must be something conflicting or somethigelse, I think. Do you need I send you something to see where the problem is? How can I do that? Thank you. |
Beta Was this translation helpful? Give feedback.
-
Yes i'm using the vedo integration only, without hub. How can send you the logs? home assistant restart is casual and on restart i can't see the "logs before", there is a way? |
Beta Was this translation helpful? Give feedback.
-
Could be a solution that by modify the "DEFAULT_TIMEOUT = 10" the problem never occurs again ? |
Beta Was this translation helpful? Give feedback.
-
Also, seems that when I activate the Comelit integration, it shuts down my zigbee2mqtt integration. I always found the Z2MQTT autorestart disabled |
Beta Was this translation helpful? Give feedback.
hello,
The integration should work without the hub.
However, there is still an open issue because one user has issues with this.
Yes, the password is the numeric one.