Skip to content

Development and implementation of event-based control for Buck and Boost DC-DC converters connected to Constant Power Loads (CPL).

Notifications You must be signed in to change notification settings

e-controls/etc-for-dc-conveters

Repository files navigation

Event-Based Control of DC-DC Converters Connected to Constant Power Loads

Author: Andevaldo da Encarnação Vitório
Advisor: Iury Valente de Bessa
Course: Bachelor's Degree in Computer Engineering
University: Universidade Federal do Amazonas
Date of defense: 02 de abril de 2024

Project Description

This final course project deals with the development and implementation of event-based control for Buck and Boost DC-DC converters connected to Constant Power Loads (CPL). The main objective is to investigate and demonstrate the efficiency and effectiveness of event-based control techniques. To this end, various simulations and analyses were carried out using Python notebooks and specific simulation tools.

Repository structure

The repository is organized into three main directories, each containing files relevant to different aspects of the project:

  • simulator/: Contém a simulação de uma microrrede de corrente contínua.
  • docs/: Contém as documentações do projeto.
    • Mathematical Modeling of a Microgrid: Detalhes da modelagem matemática da microrrede
  1. /notebooks: This directory contains the Python notebooks that were used throughout the project. These notebooks contain the codes and their descriptions needed to carry out the simulations, as well as analysis and visualization of the data obtained.

  2. /simulations: It contains the simulation files that were executed during the development of the project. These files include configuration scripts, simulation parameters and results obtained from the simulations.

Directory content

/assets

  • buck-converter/circuit.svg: Schematic diagram of the Buck converter.
  • boost-converter/circuit.svg: Schematic diagram of the Boost converter.
  • etc-mode.png: Schematic diagram of the ETC used in this project.

/notebooks

  • dynamic-etm-van-der-pol-oscillator.ipynb: Notebook with the simulation of the Van de Pol oscillator under the dynamic ETC.
  • static-etm-van-der-pol-oscillator.ipynb: Notebook with the simulation of the Van de Pol oscillator under the static ETC.
  • etc-boost-converter-with-cpl.ipynb: Notebook with Boost converter simulation under static and dynamic ETC.
  • etc-buck-converter-with-cpl.ipynb: Notebook with Buck converter simulation under static and dynamic ETC.

Description of the Converters

The Buck converter used in the simulator consists of a basic Buck converter with an RLC output voltage filter, as depicted in Figure 1. This converter supplies two loads: a Constant Resistance Load (CRL) and a Constant Power Load (CPL).

Buck Converter
Figure 1: Buck converter circuit.

The Boost converter used is shown in Figure 2. This converter supplies two loads in parallel with a capacitor: a Constant Resistance Load (CRL) and a Constant Power Load (CPL).

Boost Converter
Figure 2: Boost converter circuit.

Event-Triggered Control Model for the Buck Converter

The control model for the Buck converter employs an Event-Triggered Mechanism (ETM) to optimize control actions while minimizing computational resources. The system comprises a plant $P$, representing the Buck converter, described by the state-space equation:

$$ \dot{x} = Ax(t) + Bu(t) $$

where $x(t) \in \mathbb{R}^n$ are the system states and $u(t) \in \mathbb{R}^m$ is the control input. The state feedback control law is given by:

$$ u(t) = K\hat{x}(t) $$

The ETM determines when to transmit the plant's state to the controller over a network, maintaining the state with a Zero-Order Hold (ZOH) until the next transmission, leading to a potential transmission error:

$$ e(t) = \hat{x}(t) - x(t), \quad \forall t \in [t_k, t_{k+1}) $$

Event-triggered Control Model
Figure 3: Event-triggered Control Model

ETM Models and Optimization

Static Event-Triggered Mechanism

The static ETM has a fixed activation function:

$$ t_{k+1} = \inf { t > t_k : \Gamma(x(t), e(t)) < 0 } $$

where the triggering function is:

$$ \Gamma(x(t), e(t)) = x^T(t) \Psi x(t) - e^T(t)\Xi(t) $$

Dynamic Event-Triggered Mechanism

The dynamic ETM includes an internal dynamic variable:

$$ t_{k+1} = \inf {t > t_k : \eta(t) + \theta \Gamma(x(t), e(t)) < 0 } $$

with the internal variable dynamics:

$$ \dot{\eta} = -\lambda \eta(t) + \Gamma(x(t), e(t)) $$

Optimization for ETM Design

The optimization problem to determine the matrices $\Xi$, $\Psi$, and $K$ is formulated as:

$$ \underset{X, \tilde{\Xi}, \tilde{\Psi}, \tilde{K}}{\min} \quad \mathrm{tr}\left(\rho \tilde{\Xi} + (1 - \rho)\tilde{\Psi}\right) $$ $$ \text{subject to} \quad 10^{-\mu} \mathrm{I} \leq \tilde{\Xi} \leq 10^{\mu} \mathrm{I}, \quad 10^{-\mu} \mathrm{I} \leq \tilde{\Psi} \leq 10^{\mu} \mathrm{I} \hspace{0.5cm} \mathrm{e} \hspace{0.5cm} \begin{bmatrix} \mathsf{He}(AX + B\tilde{K}) & B\tilde{K} & X \\ \star & -\tilde{\Xi} & 0 \\ \star & \star & -\tilde{\Psi} \end{bmatrix} < 0 $$

The matrices are obtained as $K = \tilde{K}X^{-1}$, $\Xi = X^{-1}\tilde{\Xi}X^{-1}$, and $\Psi = \tilde{\Psi}^{-1}$.

Running Instructions

To run the simulations and analyze the results, follow the steps below:

  1. Clone the repository to your local machine:

    git clone git@github.com:andel-vitorio/etc-for-dc-converters.git
  2. Navigate to the project directory:

    cd etc-for-dc-converters
  3. Install the necessary dependencies:

    pip install -r requirements.txt
  4. Open Jupyter Notebook:

    jupyter notebook
  5. Navigate to the /notebooks directory and open the desired notebook to run the simulations and view the results.

Contributions

Contributions to improve this project are welcome. To contribute, please follow the steps below:

  1. Fork this repository.
  2. Create a new branch for your changes:
    git checkout -b feature/new-feature
  3. Commit your changes:
    git commit -m 'Add new feature'
  4. Upload to the original repository:
    git push origin feature/new-feature
  5. Open a Pull Request.

License

This project is licensed under the MIT License. See the LICENSE file for more details.

development

About

Development and implementation of event-based control for Buck and Boost DC-DC converters connected to Constant Power Loads (CPL).

Topics

Resources

Stars

Watchers

Forks