Skip to content

Personal and reproducible Arch Linux installation scripts. This is a read-only mirror.

Notifications You must be signed in to change notification settings

danirod/arch-install

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

arch-custom-install-scripts

These are my custom install scripts for Arch Linux. These are mines. This is not a framework. If they work for you then it is fine, but you probably want to edit the scripts to make it work for you.

Purpose:

  • The install script can be used to install Arch Linux to a new machine.
  • If my computer ever breaks, I can use the script to quickly reconfigure things.
  • Usually I'll use these scripts to create virtual machines used to record my content.

The install scripts

They are in the install/ directory.

Main scripts. They are meant to be run inside an Arch Linux ISO environment:

  • system: this installs a base system. When it runs, it will ask a couple of questions such as the root password, the name and password for the admin account, and the hostname to set.
  • refind: this installs refind. It is a separate script because if I am dual booting, usually I'll have already installed refind by myself.
  • kvm: this is a shortcut to install system and refind. Only use this if you are using a virtual machine and the hard drive was configured with the scripts/diskctl script.

The management scripts

scripts/diskctl

Used to manage QCOW2 files. Only useful when dealing with virtual machines. Only QEMU/KVM are supported.

  • scripts/diskctl create [file]: initialize an empty hard drive at the given location. The virtual drive is a QCOW2 file with the partition table already configured to three partitions:
    • An ESP partition used for the UEFI, with a size of 1 GB.
    • A main partition used for the main system, 27 GB.
    • A swap partition used for the running system, with a size of 2 GB.
  • scripts/diskctl sparse [file] [backing-file]: sparse an image file. This compacts the image to save space. The script will leave the rename the original file to something that ends with .orig, so that you can test that the sparse was done properly before deleting the original file. If you are trying to sparse a derived image, make sure to provide
  • scripts/diskctl derive [backing-file] [target-file]: creates a new image file called target-file which is an overlay image backed by the backing-file file. Note that backing-file must be relative to target-file, until I figure out how to deal with that inside the script, so to derive images/base.qcow2 into images/i3.qcow2, the parameters have to be given as scripts/diskctl derive base.qcow2 images/i3.qcow2, since base.qcow2 is the relative path for images/base.qcow2 in images/i3.qcow2.

scripts/ovmf

Use this to grab the UEFI firmware files required by the scripts/qemu command. This will take from your ovmf-edk2 files the OVMF_CODE.fd file, which contains the firmware, and the OVMF_VARS.fd, which contains the UEFI variables.

Usage: scripts/ovmf -target=[targetdir] [-source=[sourcedir]]

  • The target= parameter is mandatory and must indicate a directory where to place the files.
  • The source= parameter is optional and if not given it will use /usr/share/ovmf/x64 as a default.

The command will symlink the OVMF_CODE.fd file from the sourcedir directory to the targetdir directory. This is a readonly file, so a symlink is enough. The command will make a copy of the OVMF_VARS.fd file from the sourcedir directory into the targetdir directory. The VM will modify this file, so it is important to use a copy.

scripts/qemu

Shortcut to launch qemu-system-x86_64. Can receive the following parameters:

  • -disk=[path to the QCOW2 file]: this is the virtual disk used to store the data.
  • -iso=[path to an Arch Linux ISO file]: if an ISO file is given, it will boot in Live CD. Otherwise, it will boot the QCOW2 file.
  • -efi=[path to the OVMF firmware location]: points to a directory that should contain the OVMF_CODE.fd and OVMF_VARS.fd files, for instance the one chosen by the scripts/ovmf script.

Let's see how to boot from CD-ROM:

scripts/ovmf -target=uefi
scripts/qemu -disk=images/arch.qcow2 \
  -iso=$HOME/downloads/archlinux.iso \
  -efi=uefi

To boot from the hard drive, remove the -iso parameter:

scripts/qemu -disk=images/arch.qcow2 -efi=uefi

Virtual machine usage example

Let's see how to create a virtual machine with this:

Preparations

  1. Download Arch Linux as an ISO file and place it in archlinux.iso. For instance, symlink archlinux-YYYY.MM.DD-x86_64.iso to archlinux.iso. If you change the location, you have to also change the ISO file given as parameter in step 3.
  2. scripts/diskctl create images/base.qcow2: this will create a new QCOW2 image, the one the one that we will work with. Later, we will create a new image backed by this one. Change the last parameter if you want to store your qcow2 file elsewhere.

Install the base system

This installs a functional Arch Linux QCOW2 system. Not useful by itself because it lacks any userland tools (like a DE), but you can use this as a checkpoint that we will later backup so that we can derive images from this one.

  1. scripts/ovmf -target=images, to copy the UEFI firmware files to the images dir
  2. scripts/qemu -disk=images/base.qcow2 -iso=archlinux.iso -efi=images: startup QEMU in Live CD mode. If your Arch Linux ISO file is elsewhere, change the -iso parameter with the proper parameter. If you are using a different qcow2 file, also change the -disk parameter. Provide some valid UEFI firmware and variables files because the KVM install script will install refind. (The install script does not support BIOS booting.)
  3. Once the system is booted, wait a minute or two. The install script needs to install some packages in the Live CD environment, so we need to wait until the pacman-init service initialises the keyring, or things will fail catastrophically. Check the status of the systemd pacman-init service. Then use curl https://arch.danirod.es/install/kvm | sh. This will start the main installation process.
  4. The script will ask a couple questions. When requested, provide the username that you want to use in your admin account, and the passwords for the admin account and the root account. Also provide the hostname of the machine (useful for networking!).
  5. A couple of minutes later, the base system will be installed. Shutdown the virtual machine (poweroff is enough).

Checkpoints

Time to cleanup the image file to save space:

  1. Run diskctl sparse images/base.qcow2. If you are using a different image file, change it now. Sparsing the image file compacts it so that the unused space gets cleaned up. You can make the QCOW2 file smaller with this before it is ready for backup.
  2. Test the sparsed file as described below. If the sparsed file is successful, you can remove the .orig file that was created in the same directory as the sparsed QCOW2 file. rm images/base.qcow2.orig, for instance. Do not remove the sparsed file yet!
  3. Maybe backup this file somewhere? If you keep a backup you will not have to repeat steps 1 to 7 for a while. (You may be interesting in repeating steps 1 to 7 every month to use a fresh Arch Linux ISO file, however).

If you want to test the backup, maybe copy the QCOW2 file to a throwaway file and then start QEMU without the live CD so that we boot from the virtual drive:

cp images/base.qcow2 images/throwaway.qcow2
scripts/qemu -disk=images/throwaway.qcow2
rm images/throwaway.qcow2

Derive new images

Deriving an image means to create a new QCOW2 image that is backed by another QCOW2 image. This creates overlay images where you use a backing file as a read-only snapshot, and you store the changes made to the disk in the QCOW2 image.

This saves space. You can have a single backing file with the Linux installation you made in steps 1 to 7, and then you can derive multiple hard drives: gnome.qcow2, kde.qcow2, xfce.qcow2... For each QCOW2 file, you will only store there changes made against the original backing file.

To derive an image, use the diskctl derive command from the diskctl script. For instance:

diskctl derive base.qcow2 images/kde.qcow2
diskctl derive base.qcow2 images/gnome.qcow2
diskctl derive gnome.qcow2 images/gnome-tweaks.qcow2

The first parameter given after derive is the path to the image to be derived. The second parameter is the path of the new image file to write. Note that the backing file path is relative to the target image. Until I deal with this in the script, the relative path has to be manually given when calling diskctl, which looks clunky.

Use the new derived images

Do whatever you want with these:

scripts/qemu -disk=images/derived-image.qcow2 -efi=images

KVM development mode

When modifying the scripts, it is useful to start an HTTP server in the repository root so that you can serve the live scripts to the virtual machine over HTTP. For instance, run python3 -m http.server 9000 in the repository directory so that you can edit the scripts and see it live at http://10.0.2.2:9000/install/*.

The install/kvm script can be tweaked with the ARCH_ROOT environment variable, which indicates which hostname to use. By default it uses https://arch.danirod.es as the server, but you can change the environment variable to override this. For instance:

export ARCH_ROOT=http://10.0.2.2:9000
curl $ARCH_ROOT/install/kvm | sh

To-do tasks

  • diskctl
    • Make diskctl sparse fail if qemu-img reports that the image has a backing image, to prevent the image to convert from an overlay structure to a flat image if not needed.
    • Solve relative paths when deriving images inside the script, so that you can just provide a natural path like diskctl sparse images/base.qcow2 images/gnome.qcow2 and the script can convert the backing_file to base.qcow2 automatically.

About

Personal and reproducible Arch Linux installation scripts. This is a read-only mirror.

Topics

Resources

Stars

Watchers

Forks

Languages