This a custom component for Home Assistant.
The bbox2 integration allows you to observe and control Bbox router.
There is currently support for the following device types within Home Assistant:
- Sensor with traffic metrics
- Binary Sensor with wan status , public ip , private ip
- Device tracker for connected devices (via option add wired devices)
- Switch for enable/disable Wireless and Guest Wifi
- Press button to restart box
- Press button to ring phone
The preferred way to setup the Bouygues Bbox platform is by enabling the discovery component.
Add Bouygues Bbox module via HACS
Add your device via the Integration menu
You must have set a password for your Bbox router web administration page.
The first time Home Assistant will connect to your Bbox, you will need to specify the password of bbox.
Only the routers with Bbox OS are supported:
- Bbox (all versions)
This platform offers presence detection by keeping track of the devices connected to a Bbox router.
Ability to disable this option by integration options
Note that the Bbox waits for some time before marking a device as inactive, meaning that there will be a small delay (1 or 2 minutes) between the time you disconnect a device and the time it will appear as "away" in Home Assistant.
You should take this into account when specifying the consider_home parameter.
On the contrary, the Bbox immediately reports devices newly connected, so they should appear as "home" almost instantly, as soon as Home Assistant refreshes the devices states.
This platform offers you sensors to monitor a Bbox router. The monitored conditions are instant upload and download rates in Mb/s.