Skip to content

coin3d/sowin

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

============================================================================
==                        BUILDING SOWIN ON WINDOWS                       ==
============================================================================

Building SoWin on Windows is done by using the CMake build configuration.
Check out the detailed build instructions in the INSTALL file of the Coin
installation directory.

The Autotools build system is still maintained but at a significantly lower
priority.

============================================================================
==             OLD INFORMATION ON BUILDING SOWIN ON WINDOWS               ==
============================================================================

Make sure you have built Coin before building SoWin.  You can substitute
another Open Inventor implementation for Coin, but expect to need to
tweak source code or compile/link settings if doing so.  We try to be
as compatible as possible, but it can take a long while between every
time we test the compatibility.

If you built Coin through the Visual Studio project files under build/,
then do the same for SoWin.  The project files are in the same location
under SoWin.  If you on the other hand built Coin from the Cygwin shell
using the configure + make process, then proceed in the same way for
SoWin.  You can not use the configure + make process to build SoWin if
you did not build Coin the same way.  The necessary coin-config script
is not set up and installed if you used Visual Studio to build Coin.

See Coin/README and Coin/README.WIN32 for more instructions.