IEEE 802.11 (WLAN) devices send broadcast control packets called beacons at regular intervals. Beacons contain information such as the name of the network (SSID), the channel/frequency used by the device, etc.
In addition to this information, some IEEE 802.11 (outdoor device) vendors use proprietary extensions, in the form of IEEE 802.11 Information Elements (IEs), in the beacons of their devices. These IEs usually contain the name of the device to help in the scanning process: when users perform "site surveys" from the web interface of their devices (with original firmwares), they will find, next to the SSID, channel, and other information, the device name of the device generating the beacons.
In Linux based OSes (including OpenWRT/LEDE) this feature is not ready out of the box, but the scripts here included can help to scan, decode and generate these proprietary (OUI 00:0c:42) IEs.
These scripts are designed to work also with the busybox shell on OpenWRT/LEDE.
This script outputs a table like the one below:
BSS SSID SIGNAL FREQ HOSTNAME
a2:63:91:aa:aa:aa D-Link -82.00 dBm 2412
c0:4a:00:bb:bb:bb ninux.org -79.00 dBm 2437 experiment
44:d9:e7:cc:cc:cc ubnt -51.00 dBm 5220 fox
To install, just download it and make it executable:
wget --no-check-certificate https://github.com/raw/cl4u2/ieswescan/master/sitesurvey
chmod +x sitesurvey
To use it try:
./sitesurvey wlan0
hostapd includes a configuration parameter called vendor_elements which can be configured to send custom IEs.
The generatevendorelement script takes as input a name (e.g. the hostname) and generates a corresponding vendor_elements configuration value for hostapd.conf.
Example:
wget --no-check-certificate https://github.com/raw/cl4u2/ieswescan/master/generatevendorelement
chmod +x generatevendorelement
./generatevendorelement "experiment"
dd26000c42000000011e000000001f660902ff0f6578706572696d656e7400000000000000000000
We can then take the output of this script and add it to our hostapd.conf. For example:
# Additional vendor specific elements for Beacon and Probe Response frames
# This parameter can be used to add additional vendor specific element(s) into
# the end of the Beacon and Probe Response frames. The format for these
# element(s) is a hexdump of the raw information elements (id+len+payload for
# one or more elements)
vendor_elements=dd26000c42000000011e000000001f660902ff0f6578706572696d656e7400000000000000000000
OpenWrt and LEDE provide ubus support for this:
VEL=$(./generatevendorelement $(uci get system.@system[0].hostname))
ubus call hostapd.wlan0 set_vendor_elements '{"vendor_elements": "'$VEL'"}'
ubus call hostapd.wlan0 update_beacon
Please refer to this presentation: