Ciliatus Control Unit Primarily used for GPIO controlled sensors on a Raspberry Pi
- Generate config in Ciliatus and copy to
config.ini. - Add authentication tokens
If you're using multiple versions of python:
sudo python3.6 app.py
Otherwise
sudo python app.py
You can run it in background using nohup:
sudo nohup python app.py &
Note: root permissions are only required for GPIO access.
MyPyDHT supports the following sensors:
- DHT11
- DHT22
- AM2302
- BME280
Other sensors should be relatively simple to implement using the existing infrastructure.
I2C is sensitive to high distances. Try lowering the I2C clock and using a shielded cable.
Lowering the clock on RaspberryPi is done by adding the following line in /boot/config.txt:
dtparam=i2c_arm_baudrate=frequency
Replace frequency with your desired clock. 20kHz is reommended for up to 30m.