[FR] CHAMBER temperature

[DrumClock]

Please be able to display BED and CHAMBER temperature alternately.

[oldman4U]

hi.

This is a duplicate of #707 where the user was not able to give the ticket a useful title and now he is not able to close the ticket or change the title.

Please close the ticket. This feature request is on the FR list which I will post very soon.

Thank you

[bigtreetech]

Hello, In fact, it has been supported since #875
If CHAMBER is enabled in Marlin, a switching state of CHAMBER will be automatically added in the heater menu of touch screen, and the actual temperature and target temperature of CHAMBER will also be displayed on the top title bar.

[DrumClock]

Yes, this is the case, but is it possible to display BAD and CHAMBER temperatures
alternately in the same way as for NOZZLE T0 and T1?

[oldman4U]

DrumClock.

@bigtreetech - welcome back, we missed you!;-)

Personally I do not use a heated Chamber, but from BTT's answer I would expect that this already works as expected in case everything is setup right in Marlin.

[DrumClock]

Yes, in the "Heat" menu, the Chamber is fine.
I wanted the temperature to be shown on the home screen and on the screen when printing alternately with the temperature for
"BED" as with the nozzle T0 / T1, Fan F0 / F1 and Speed / Flow icons

Is it already understandable?

[bigtreetech]

Yes, I understand. You want to alternate bed and chamber on the status screen

[oldman4U]

No idea if this is already possible or not, but could you please activate this in config.ini and update your TFT or activate this directly in the feature list of the TFT to see if you can see the Chamber temp there.

Persistent temperature info
show persistent temperature info on all menu screens
Options: [enable: 1, disable: 0]
persistent_info:1

Please let me know

[DrumClock]

Hi @oldman4U
No change, the temperature CHAMBER z is displayed only in the corner of the screen but it works even without setting.

[oldman4U]

Could you pls add a picture which shows this.

Thank you

[DrumClock]

Hi @oldman4U there are ..

[oldman4U]

OK. Picture 3 and 4 shows clearly that the Chamber is recognised correctly. So you should see the Bed and Chamber Temp. alternating - which is not the case. You can leave it a feature request and I will add it to the FR list instead of 707, or you change it to a Bug. Whatever works better for you.

[DrumClock]

OK, add it to the FR list instead of 707
Thanks

[oldman4U]

Done.

Please check #1170 and close this ticket afterwards.

Thank you

[oldman4U]

Hi.

I verified this also on my printer, even I have no chamber. Turning it on there is a chamber in the upper right corner, but the Bed does not changed to show the chamber. According to BTT this should work, so maybe it would even be best to change this from FR to Bug!?

Again, as you like;-)

[DrumClock]

Hi @oldman4U
So can you please change it to BUG?

[oldman4U]

You are the owner, so only you can change it.

I will keep it also in the feature requests because it is unclear if it is A or B.

[DrumClock]

how do I change [FR] CHAMBER temperature # 1182 to BUG?

[oldman4U]

@radek8

Can you please help with this issue. At least to find out if this is a bug or not implemented.

Thank you

[radek8]

Hello
it is not implemented to be displayed on both status screens. only in the corner of the display.
This is what he would like to program.

[oldman4U]

Cool. So it is a feature request. Thank you Radek Radek <notifications@github.com> schrieb am Do. 22. Okt. 2020 um 18:24:

…

Hello it is not implemented to be displayed on both status screens. only in the corner of the display. This is what he would like to program. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#1182 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AM6XKZGGMFYRQZBPR6KQRXTSMBMEPANCNFSM4SVDMHMQ> .

[oldman4U]

I checked the bmp's and there is nothing for Chamber, so it has never been implemented.

@DrumClock

It is listed in the FR list. Could you please close this ticket and I will try to find an engineer to look at it.

Thank you

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.