MKTSTFT28 BeepAtBoot Patcher

bigtreetech · Aug 21, 2023 · 9d994ae · 9d994ae
1 parent 8a08dce
commit 9d994ae
Show file tree

Hide file tree

Showing 2 changed files with 15 additions and 0 deletions.
diff --git a/Bootloaders/MKS_TFT28 V3.0.0 Botlooader/Bootloader Patcher/MKSTFT28.bin b/Bootloaders/MKS_TFT28 V3.0.0 Botlooader/Bootloader Patcher/MKSTFT28.bin
diff --git a/Bootloaders/MKS_TFT28 V3.0.0 Botlooader/Bootloader Patcher/ReadMe.txt b/Bootloaders/MKS_TFT28 V3.0.0 Botlooader/Bootloader Patcher/ReadMe.txt
@@ -0,0 +1,15 @@
+This is a bootloader patcher ofr the MKSTFT28. It is only suitable for TFTs with STM23F107VC MCU.
+Do not use on any other TFT !!!
+
+This patcher uploads a bootloader that changes the long beep of the bootloader on startup to a short "chirp", nothing more, nothing less.
+
+Usage:
+Put it on the SD card as any other regular FW file and boot your printer with the SD inserted.
+During the update you'll see a red dot and a progress bar. The progress bar will let you know when the upload of the patched FW is finished. Also, at the end of the patched bootloader flash procedure the red dot will change into a blinking green dot. That's when you can eject the SD card and copy your favorite FW file to be flashed over this bootloader patcher FW.
+
+Attention!!! This is not a functional FW, it's only for uploading the patched bootloader, you must reupload your regular favorite FW after the bootloader patching FW has done its job.
+
+Enjoy!
+
+Yours truly
+@kisslorand