Fix some typos (#2865)

bigtreetech · Jan 15, 2024 · 3779fa5 · 3779fa5
1 parent 6d49c6e
commit 3779fa5
Show file tree

Hide file tree

Showing 15 changed files with 19 additions and 15 deletions.
diff --git a/TFT/src/User/API/Language/language_am.h b/TFT/src/User/API/Language/language_am.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_ca.h b/TFT/src/User/API/Language/language_ca.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_en.h b/TFT/src/User/API/Language/language_en.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_es.h b/TFT/src/User/API/Language/language_es.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_gr.h b/TFT/src/User/API/Language/language_gr.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_jp.h b/TFT/src/User/API/Language/language_jp.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_nl.h b/TFT/src/User/API/Language/language_nl.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied. Don't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_pt.h b/TFT/src/User/API/Language/language_pt.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_sk.h b/TFT/src/User/API/Language/language_sk.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_sl.h b/TFT/src/User/API/Language/language_sl.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "Ext. 100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Language/language_tc.h b/TFT/src/User/API/Language/language_tc.h
@@ -343,7 +343,7 @@
     #define STRING_TUNE_EXTRUDER          "Tune steps"
     #define STRING_TUNE_EXT_EXTRUDE_100   "挤出100mm"
     #define STRING_TUNE_EXT_TEMP          "Extruder tuning | Heat"
-    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
+    #define STRING_TUNE_EXT_MARK120MM     "Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding."
     #define STRING_TUNE_EXT_ADJ_ESTEPS    "Adjust E-Steps"
     #define STRING_TUNE_EXT_ESTEPS_SAVED  "New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f"
     #define STRING_TUNE_EXT_MEASURED      "Length remaining:"

diff --git a/TFT/src/User/API/Settings.c b/TFT/src/User/API/Settings.c
@@ -99,7 +99,7 @@ void initSettings(void)
 
   infoSettings.probing_z_offset       = PROBING_Z_OFFSET;
   infoSettings.probing_z_raise        = PROBING_Z_RAISE;
-  infoSettings.z_steppers_alignment   = Z_STEPPER_ALIGNEMENT;
+  infoSettings.z_steppers_alignment   = Z_STEPPERS_ALIGNMENT;
   infoSettings.touchmi_sensor         = TOUCHMI_SENSOR;
 
 // Power Supply Settings (only if connected to TFT controller)

diff --git a/TFT/src/User/API/Settings.h b/TFT/src/User/API/Settings.h
@@ -14,7 +14,7 @@ extern "C" {
 // Config version support (format YYYYMMDD)
 // change if new elements/keywords are added/removed/changed in the Configuration.h
 // this number should match CONFIG_VERSION in Configuration.h
-#define CONFIG_SUPPPORT 20230929
+#define CONFIG_SUPPPORT 20231119
 
 #define FONT_FLASH_SIGN       20230821  // (YYYYMMDD) change if fonts require updating
 #define CONFIG_FLASH_SIGN     20230929  // (YYYYMMDD) change if any keyword(s) in config.ini is added or removed

diff --git a/TFT/src/User/Configuration.h b/TFT/src/User/Configuration.h
@@ -1,7 +1,7 @@
 #ifndef _CONFIGURATION_H_
 #define _CONFIGURATION_H_
 
-#define CONFIG_VERSION 20230929
+#define CONFIG_VERSION 20231119
 
 //====================================================================================================
 //=============================== Settings Configurable On config.ini ================================
@@ -732,7 +732,7 @@
  *
  *   Options: [disable: 0, enable: 1]
  */
-#define Z_STEPPER_ALIGNEMENT 0  // Default: 0
+#define Z_STEPPERS_ALIGNMENT 0  // Default: 0
 
 /**
  * TouchMI Settings (ABL)

diff --git a/TFT/src/User/SanityCheck.h b/TFT/src/User/SanityCheck.h
@@ -347,6 +347,10 @@ extern "C" {
   #endif
 #endif
 
+#ifdef Z_STEPPER_ALIGNEMENT
+  #error "Z_STEPPER_ALIGNEMENT is now Z_STEPPERS_ALIGNMENT."
+#endif
+
 #ifdef __cplusplus
 }
 #endif