📦️ Update prebuilt binaries and config

bigtreetech · Nov 10, 2022 · 28cf2f4 · 28cf2f4
1 parent 42634cb
commit 28cf2f4
Show file tree

Hide file tree

Showing 49 changed files with 22 additions and 44 deletions.
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT24_V1.1.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT24_V1.1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V2.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V2.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0_B1.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0_B1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0_E3.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0_E3.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT43_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT43_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT50_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT50_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT70_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT70_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT24_V1.1.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT24_V1.1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT28_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT28_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0_B1.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0_B1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0_E3.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0_E3.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT43_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT43_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT50_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT50_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT70_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT70_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT28_V1.0.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT28_V1.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT35_APP1_V2.0.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT35_APP1_V2.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT35_V1.0.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT35_V1.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT35_V1.1.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT35_V1.1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT35_V1.2.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT35_V1.2.27.x.bin
diff --git a/Copy to SD Card root directory to update/Language Packs/language_am.ini b/Copy to SD Card root directory to update/Language Packs/language_am.ini
@@ -1,5 +1,5 @@
 #### Language Code:AM
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_br.ini b/Copy to SD Card root directory to update/Language Packs/language_br.ini
@@ -1,5 +1,5 @@
 #### Language Code:BR
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Passos/mm E
 label_tune_ext_extrude_100:Extr. 100mm
 label_tune_ext_temp:Extr. ajuste | Aquece
 label_tune_ext_mark120mm:Marque o filamento em 120mm \nPressione '%s' quando estiver pronto \nMeça o comprimento marcado após a extrusão
-label_tune_ext_heatoff:Desliguar o Hotend?
 label_tune_ext_adj_esteps:Ajustar passos/mm E
 label_tune_ext_esteps_saved:Novos passos/mm E definidos\nNão se esqueça de salvar na EEPROM\nNovo valor: %0.2f
 label_tune_ext_measured:Comprimento restante:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_ca.ini b/Copy to SD Card root directory to update/Language Packs/language_ca.ini
@@ -1,5 +1,5 @@
 #### Language Code:CA
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_cn.ini b/Copy to SD Card root directory to update/Language Packs/language_cn.ini
@@ -1,5 +1,5 @@
 #### Language Code:CN
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:微调E-Steps
 label_tune_ext_extrude_100:挤出100mm
 label_tune_ext_temp:挤出机微调 | 加热
 label_tune_ext_mark120mm:在耗材上标记120mm\n标记完成后点击 '%s'\n挤出完成后测量剩余长度
-label_tune_ext_heatoff:关闭加热?
 label_tune_ext_adj_esteps:调整E-Steps
 label_tune_ext_esteps_saved:新的E-Steps已生效,需要手动保存到EEPROM\n新E-Steps: %0.2f
 label_tune_ext_measured:剩余的长度:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_cz.ini b/Copy to SD Card root directory to update/Language Packs/language_cz.ini
@@ -1,5 +1,5 @@
 #### Language Code:CZ
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:E-Krok
 label_tune_ext_extrude_100:100mm Vysunutí
 label_tune_ext_temp:Kalibrace extruderu, ohřev
 label_tune_ext_mark120mm:Označ 120mm na filamentu\nStlač '%s' pokud jsi připraven.\nZměř zbývající délku po vytlačení.
-label_tune_ext_heatoff:Vypnout topení?
 label_tune_ext_adj_esteps:Nastavení E-Kroku
 label_tune_ext_esteps_saved:Nové E-kroky nastaveny!\nNezapmeň uložit do EEPROM.\nNová hodnota: %0.2f
 label_tune_ext_measured:Zbývající délka:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_de.ini b/Copy to SD Card root directory to update/Language Packs/language_de.ini
@@ -1,5 +1,5 @@
 #### Language Code:DE
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Schritte
 label_tune_ext_extrude_100:100mm ext.
 label_tune_ext_temp:Düsentemperatur
 label_tune_ext_mark120mm:Filament 120 mm über Einlass markieren,\ndann '%s' drücken & nach Extrusion\nerneut messen.
-label_tune_ext_heatoff:Heizung abschalten?
 label_tune_ext_adj_esteps:E-Schritte einstellen
 label_tune_ext_esteps_saved:Neue E-Schritte gespeichert! Bitte auch im EEPROM speichern.\nNeuer Wert: %0.2f
 label_tune_ext_measured:Restlänge:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_en.ini b/Copy to SD Card root directory to update/Language Packs/language_en.ini
@@ -1,5 +1,5 @@
 #### Language Code:EN
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_es.ini b/Copy to SD Card root directory to update/Language Packs/language_es.ini
@@ -1,5 +1,5 @@
 #### Language Code:ES
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_fr.ini b/Copy to SD Card root directory to update/Language Packs/language_fr.ini
@@ -1,5 +1,5 @@
 #### Language Code:FR
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Extrudeur
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Réglage de l'extrudeur
 label_tune_ext_mark120mm:Marquer 120 mm sur le filament\nAppuyer ensuite sur '%s'\nMesurer la longueur restante
-label_tune_ext_heatoff:Arrêter la chauffe ?
 label_tune_ext_adj_esteps:Ajustement E-Steps
 label_tune_ext_esteps_saved:Nouveau E-steps enregistré !
 label_tune_ext_measured:Longueur restante

diff --git a/Copy to SD Card root directory to update/Language Packs/language_gr.ini b/Copy to SD Card root directory to update/Language Packs/language_gr.ini
@@ -1,5 +1,5 @@
 #### Language Code:GR
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_hu.ini b/Copy to SD Card root directory to update/Language Packs/language_hu.ini
@@ -1,5 +1,5 @@
 #### Language Code:HU
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Lépés hangolás
 label_tune_ext_extrude_100:Kiad 100mm
 label_tune_ext_temp:Adagoló hangolás | Fűt
 label_tune_ext_mark120mm:A 120mm-t jelöld be a szálon\nNyomd '%s' ha kész\nMérd meg a hátralévő hosszt adagolás után.
-label_tune_ext_heatoff:Kikapcsolod a fűtést?
 label_tune_ext_adj_esteps:E-lépés állítás
 label_tune_ext_esteps_saved:Új E-lépés mentve!\nNe felejtsd el menteni EEPROM-ba.\nÚj érték: %0.2f
 label_tune_ext_measured:Hátramaradt hossz:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_it.ini b/Copy to SD Card root directory to update/Language Packs/language_it.ini
@@ -1,5 +1,5 @@
 #### Language Code:IT
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Step/mm E
 label_tune_ext_extrude_100:Estr. 100mm
 label_tune_ext_temp:Regolazione estr. | Scalda
 label_tune_ext_mark120mm:Fai un segno a 120mm sul filamento\nPremi '%s' quando sei pronto\nMisura la lunghezza mancante dopo l'estrusione
-label_tune_ext_heatoff:Spegnere l'hotend?
 label_tune_ext_adj_esteps:Regola step/mm E
 label_tune_ext_esteps_saved:Nuovi step/mm di E impostati!\nNon dimenticare di salvarli nellaEEPROM\nNuovo valore: %0.2f
 label_tune_ext_measured:Lunghezza mancante:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_jp.ini b/Copy to SD Card root directory to update/Language Packs/language_jp.ini
@@ -1,5 +1,5 @@
 #### Language Code:JP
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_nl.ini b/Copy to SD Card root directory to update/Language Packs/language_nl.ini
@@ -1,5 +1,5 @@
 #### Language Code:NL
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied. Don't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_pl.ini b/Copy to SD Card root directory to update/Language Packs/language_pl.ini
@@ -1,5 +1,5 @@
 #### Language Code:PL
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Kroki
 label_tune_ext_extrude_100:Wsuń 10cm
 label_tune_ext_temp:Dostrajanie wytłaczarki | Grzanie
 label_tune_ext_mark120mm:Zaznacz 120 mm na filamencie.\nNaciśnij '%s' gdy będziesz gotowy.\nZmierz pozostałą długość po wytłoczeniu.
-label_tune_ext_heatoff:Wyłączyć grzałkę?
 label_tune_ext_adj_esteps:Dostosuj kroki E
 label_tune_ext_esteps_saved:Nowe kroki E zastosowane.\nNie zapomnij zapisać to w EEPROM.\nNowa wartość: %0.2f
 label_tune_ext_measured:Pozostała długość:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_pt.ini b/Copy to SD Card root directory to update/Language Packs/language_pt.ini
@@ -1,5 +1,5 @@
 #### Language Code:PT
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_ru.ini b/Copy to SD Card root directory to update/Language Packs/language_ru.ini
@@ -1,5 +1,5 @@
 #### Language Code:RU
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Настройка шагов
 label_tune_ext_extrude_100:100мм экст.
 label_tune_ext_temp:Настройка экструдера/Нагрев
 label_tune_ext_mark120mm:Отметьте 120 мм на прутке\nНажмите '%s' по говности\nИзмерьте полученную длину/nпосле экструдирования
-label_tune_ext_heatoff:Отключить нагрев?
 label_tune_ext_adj_esteps:Подстройка E-шагов
 label_tune_ext_esteps_saved:E-шаги установлены!\nНе забудьте сохранить их в EEPROM\nНовое значение: %0.2f
 label_tune_ext_measured:Оставшаяся длина:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_sk.ini b/Copy to SD Card root directory to update/Language Packs/language_sk.ini
@@ -1,5 +1,5 @@
 #### Language Code:SK
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_sl.ini b/Copy to SD Card root directory to update/Language Packs/language_sl.ini
@@ -1,5 +1,5 @@
 #### Language Code:SL
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_tc.ini b/Copy to SD Card root directory to update/Language Packs/language_tc.ini
@@ -1,5 +1,5 @@
 #### Language Code:TC
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:挤出100mm
 label_tune_ext_temp:Extruder tuning | Heat
 label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
-label_tune_ext_heatoff:Turn the heater off?
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_tr.ini b/Copy to SD Card root directory to update/Language Packs/language_tr.ini
@@ -1,5 +1,5 @@
 #### Language Code:TR
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Ext. Adım
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Ekstruder ayarlama | Isı
 label_tune_ext_mark120mm:Filamanda 120mm'yi işaretleyin\nHazır olunca '%s'e basın\nEkstrüzyondan sonra kalan mesafeyi ölçün
-label_tune_ext_heatoff:Isıtıcıyı kapat?
 label_tune_ext_adj_esteps:E-Adım ayarla
 label_tune_ext_esteps_saved:Yeni E-Adımı kaydedildi!\nEEPROM'a kaydetmeyi unutmayınız.\nYeni Değer: %0.2f
 label_tune_ext_measured:Kalan mesafe:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_uk.ini b/Copy to SD Card root directory to update/Language Packs/language_uk.ini
@@ -1,5 +1,5 @@
 #### Language Code:UK
-## Language Version:20220712
+## Language Version:20221018
 ## Maximum byte per keyword is 250 Bytes.
 ## Escape characters are not supported except newline '\n'
 
@@ -307,7 +307,6 @@ label_tune_extruder:Налаштування кроків
 label_tune_ext_extrude_100:Екст. 100мм
 label_tune_ext_temp:Налаштування екструдера\nНагрівання
 label_tune_ext_mark120mm:Позначте 120 мм на філаменті.\nПо готовності '%s' введіть\nвиміряну отриману довжину після екструзії
-label_tune_ext_heatoff:Відключити нагрів?
 label_tune_ext_adj_esteps:Підстроювання E-кроків
 label_tune_ext_esteps_saved:E-кроки встановлені!\nНе забудьте зберегти їх в EEPROM\nНове значення:%0.2f
 label_tune_ext_measured:Довжина частини, що залишилася:

diff --git a/Copy to SD Card root directory to update/MKS_TFT28_NEW_GENIUS.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT28_NEW_GENIUS.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT28_V3.0.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT28_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT28_V4.0.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT28_V4.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT32_V1.3.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT32_V1.3.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT32_V1.4.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT32_V1.4.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT35_V1_0.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT35_V1_0.27.x.bin