Skip to content

This is a Jeti ExBus Sensor package which runs on a 328PB. This sensor supports 3x voltage, 1x current and 2x rpm measurement. You can connect GPS (location, ground speed ...), BME280 (pressure: altitude, vario, temperature), BNO055 (orientation, roll, nick, magnatic compass)) and Kontronik ESC. Outputs are 3x flash (position) lights, 2x blinkin…

License

Notifications You must be signed in to change notification settings

andreobi/Jeti_ExBusSensor

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

9 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Jeti_ExBusSensor

This is a Jeti ExBus Sensor package which runs on a 328PB. To compile this code in an arduino environment, you need to install the 328PB support. Search the internet for "arduino install 328pb support" and follow the guidelines.

This sensor supports: 3x voltage, 1x current and 2x rpm measurement. GPS (location, longitude, latitude, ground speed ...) tested with ublox6 and 8 with 9600 baud BME280 (pressure: altitude, vario, temperature) BNO055 (orientation, roll, nick, magnatic compass)) Kontronik ESC: current, capacity, voltage, ...

Outputs: 3x flash (position) lights 32 bit pattern length and a period of 256ms upto 8s 2x independent blinking 1Hz / or constant lights 1x buzzer

Input: 1x Switch to ground, will send a message to the TX display

Further function details are in Beschreibung.txt Hardware and GPS configuration details are described in JetiSensorArduino.pdf

It is not necessary to connect all sensor parts. In the JetiBox menu is a configuration for the connected hardware and a selection options for which signals should be send.

The Kontronik ESC is only supported via 16Mhz version, because of the 115200k.

I recommend to use an ISP programmer to download the program to get also information about reset reason (brownout or watchdaog) of the sensor.

know issue: Kontronik changed the CRC calculation, depending on the sw version you might get an ESC missing signal error, first aid disable the CRC check in control_k

About

This is a Jeti ExBus Sensor package which runs on a 328PB. This sensor supports 3x voltage, 1x current and 2x rpm measurement. You can connect GPS (location, ground speed ...), BME280 (pressure: altitude, vario, temperature), BNO055 (orientation, roll, nick, magnatic compass)) and Kontronik ESC. Outputs are 3x flash (position) lights, 2x blinkin…

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published