-
-
Notifications
You must be signed in to change notification settings - Fork 84
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Touch sensitive behaviour Pin D18 #63
Comments
Thanks for sharing your built. If you want to add photos from different point of view (inside included) it will be very appreciated. |
Hi, Please find attached some more pictures and the circuit diagram. Cheers |
@Hans68 Nice work. Do you know yet what kind of battery life you are getting? And if you do, what mode are you using, for reference. Thanks! |
Hi,
I use "WiFi only" for configuration and "BLE only" mode for operation. In
BLE mode with all LED's on I got a current of app. 280 mA measured directly
at the 18650 Lion battery with
2.600 mAh. So an operation of >8 hours should be more than enough for one
Gig.
Cheers
Hans
Am Do., 30. Jan. 2020 um 23:33 Uhr schrieb mknerr <notifications@github.com
…:
@Hans68 <https://github.com/Hans68> Nice work. Do you know yet what kind
of battery life you are getting? And if you do, what mode are you using,
for reference. Thanks!
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#63?email_source=notifications&email_token=ALR3NUZJ3KZHDSBLMSAWORLRANITFA5CNFSM4KNB7E3KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEKM2DYY#issuecomment-580493795>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALR3NU2FUEL4QXEGTTZPT73RANITFANCNFSM4KNB7E3A>
.
|
Great. Thanks for the info. |
Hi alf45tar,
first of all again many thanks for this great project and your continous support. My Pedalino is nearly finished and working great. Attached a picture of my solution.
Now to the issue:
I recognized a sensitive behaviour if I touched the non metal housing (glass fibre plastic) close to the region where the Pro micro is located. I got strange displays on the OLED.
I solved this problem by adding a 100k resistor from D18 to ground. Perhaps helpful also for others.
Cheers
![IMG_2646](https://user-images.githubusercontent.com/48477907/73347772-738fa280-4288-11ea-868e-ea55fb506d5c.JPG)
Hans
The text was updated successfully, but these errors were encountered: