Exchange files between the browser and other IPFS nodes

This tutorial will help you exchange files between browser nodes and go-ipfs or js-ipfs nodes!

Note: As js-ipfs@0.33.x currently doesn't support DHT peer discovery, the peer from which you are fetching data should be within the reach (local or in public IP) of the browser node.

That being said, we will explain how to circumvent these caveats and once they are fixed, we'll update the tutorial as well.

Application diagram

The goal of this tutorial is to create a simple application with an IPFS node that dials to other instances using WebRTC, and at the same time dial and transfer files from a browser IPFS node using WebSockets as the transport.

┌──────────────┐                ┌──────────────┐
│   Browser    │ libp2p(WebRTC) │   Browser    │
│              │◀──────────────▶│              │
└──────────────┘                └──────────────┘
       ▲                                  ▲
       │WebSockets              WebSockets│
       │        ┌──────────────┐          │
       │        │   Desktop    │          │
       └───────▶│   Terminal   │◀─────────┘
                └──────────────┘

Tutorial goal

The goal of this tutorial is for you to have something like this in the end:

Step-by-step instructions

Here's what we are going to be doing:

1. Install a go-ipfs or js-ipfs node in your machine
2. Make your daemons listen on WebSockets
3. Start the app
4. Dial to a node using WebSockets (your desktop ones)
5. Transfer files between all of your nodes!

Just follow the instructions below and it will be up and running in no time!

1. Install go-ipfs or js-ipfs

If you already have go-ipfs or js-ipfs installed in your machine, you can skip this step. Otherwise, read on.

This tutorial works with either go-ipfs or js-ipfs, so you can install one of your choosing.

go-ipfs can be installed via its binary here. Alternatively, you can follow the install instructions in ipfs/go-ipfs.

js-ipfs requires you to have node and npm installed. Then, you simply run:

> npm install --global ipfs

This will alias jsipfs on your machine; this is to avoid issues with go-ipfs being called ipfs.

At this point, you should have either js-ipfs or go-ipfs running. Now, initialize it:

> ipfs init
# or
> jsipfs init

This will set up an IPFS repo in your home directory.

2. Make your daemons listen on WebSockets

Now you need to edit your config file, the one you just set up with {js}ipfs init. It should be in either ~/.jsipfs/config or ~/.ipfs/config, depending on whether you're using JS or Go.

Note: js-ipfs sets up a websocket listener by default, so if you're using the JS implementation you can skip this and just start the daemon.

Since websockets support is currently not on by default, you'll need to add a WebSockets address manually. Look into your config file to find the Addresses section:

"Addresses": {
  "Swarm": [
    "/ip4/0.0.0.0/tcp/4002"
  ],
  "API": "/ip4/127.0.0.1/tcp/5002",
  "Gateway": "/ip4/127.0.0.1/tcp/9090"
}

Add the /ip4/127.0.0.1/tcp/9999/ws entry to your Swarm array. Now it should look like this:

"Addresses": {
  "Swarm": [
    "/ip4/0.0.0.0/tcp/4002",
    "/ip4/127.0.0.1/tcp/9999/ws"
  ],
  "API": "/ip4/127.0.0.1/tcp/5002",
  "Gateway": "/ip4/127.0.0.1/tcp/9090"
}

Save the file and it should be able to listen on Websockets. We're ready to start the daemon.

> ipfs daemon
# or
> jsipfs daemon

You should see the Websocket address in the output:

Initializing daemon...
Swarm listening on /ip4/127.0.0.1/tcp/4001
Swarm listening on /ip4/127.0.0.1/tcp/9999/ws
Swarm listening on /ip4/192.168.10.38/tcp/4001
Swarm listening on /ip4/192.168.10.38/tcp/9999/ws
API server listening on /ip4/127.0.0.1/tcp/5001
Gateway (readonly) server listening on /ip4/0.0.0.0/tcp/8080
Daemon is ready

Check the /ws in line 5, that means it is listening. Cool.

3. Start the app

Make sure you're in js-ipfs/examples/exchange-files-in-browser.

We'll need to install and bundle the dependencies to run the app. Let's do it:

> npm install
...
> npm run bundle
...
> npm start

You should see something like this if all went well:

Starting up http-server, serving public
Available on:
  http://127.0.0.1:12345
  http://192.168.2.92:12345
Hit CTRL-C to stop the server

Now go to http://127.0.0.1:12345 in a modern browser and you're on!

4. Dial to a node using WebSockets (your desktop ones)

Make sure you have a daemon running. If you don't, run:

> ipfs daemon
# or
> jsipfs daemon

Open another terminal window to find the websocket addresses that it is listening on:

> ipfs id
# or
> jsipfs id

It should look like this: /ip4/127.0.0.1/tcp/9999/ws/ipfs/<your_peer_id>.

Copy and paste the multiaddr to connect to that peer:

Check that you got connected:

5. Transfer files between all of your nodes!

Now you can add files through the CLI with:

> ipfs add <file>
# or
> jsipfs add <file>

Copy and paste the multihash and fetch the file in the browser!

You can also open two browser tabs, drag and drop files in one of them, and fetch them in the other!

But the coolest thing about this tutorial is pubsub! You can open two tabs that will share files through workspaces named after the url. Try opening two tabs with the following url:

http://127.0.0.1:12345/#file-exchange
# You can substitute `file-exchange` with anything you like, just make sure the two tabs are in the same workspace.

Now every file that you upload in one tab will appear in the other! You can even open a new tab in that workspace and it will sync the files that were added before!