Skip to content

Software which can read MIFARE/FeliCa cards through a card reader and execute commands to a MCU through Serial and USB communications.

Notifications You must be signed in to change notification settings

abila5h/CardReader

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

47 Commits
 
 
 
 
 
 

Repository files navigation

CardReader

Software which can read MIFARE / FeliCa cards and also execute commands to a PIC18F4550 MCU.

A system which can be implemented in public transport (buses) or fare collection systems.

Synopsis

For this project, a project board which had a PIC18F4550 MCU, LEDs, Switches, UM232R and a RS-485 Transceiver was given along with a Autostar Wiegand Card Reader. I was tasked to design an executable which will be able to read the cards from the reader and also execute commands to the project board. This is to simulate a system which can be implemented in public buses to aid in the passenger count, card value deduction and assisting the bus captain.

This project serves as a skeleton code for any project which requires the need to serially communicate (read/write) to external peripherals through USB.

Project Functionalities

  • Detecting MiFare / Felica Card along with the Unique Card ID
  • Passenger count based on entry and exit (2 card readers)
  • Open and Close Door simulation based on switch buttons
  • Temperature control simulation based on switch buttons
  • Validation for entries and exits (low fare, multiple taps)

Built With

Software

  • MPLAB X Ide - Used for programming the MCU firmware
  • XC8 Compiler - Needed for translating C code to machine language
  • Visual C++ - GUI for the executable and serial communications to the MCU and Card Reader
  • External Libraries in C++ (USB_Hid and Serial_Comm)

Hardware

  • PIC18F4550 MCU
  • LEDs and Switches
  • UM232R USB to Serial UART
  • RS-485 Transceiver
  • Project Board - PIC18F4550 interfaced and wired together with the above LEDs, Switches, UM232R and RS-485 IC. (The project board was issued by the school)
  • ICD 3 - Required to program the MCU with the firmware
  • Autostar Wiegand Card Reader

System Diagram

Picture

Getting Started

Prerequisites

MPLAB X IDE, Visual Studio 

Installing

  • Download the Zip File of this Project
  • Open Visual Studio and in the file menu, click on Open ▸ Project/Solution and select
Bus Project.sln
  • Open MPLAB X IDE and File ▸ Open Project and select
Firmware.X

The main code you should have opened are

Form1.h in Visual Studio

and

app_device_custom_hid.c in MPLAB

Code Example

The API that is used for USB Communication is Microsoft' USB HID API which has these four functions

CreateFile
WriteFile
ReadFile
CloseHandle

Enabling Serial Communication

int ret;
Serial_SetComport(comportval);
Serial_SetBaudrate(19200);
Serial_ClearBuffer();
ret=Serial_Open();

Polling for a button

Application sends a command to the MCU to check if switch is pressed in project board using USB HID function (Visual Studio)

 write_buffer[0] = 0x00;
 write_buffer[1] = 0xAB;
 write_buffer[2] = 0x04;
 write_buffer[3] = 0x41; //command packet to be sent to MCU
 write_buffer[4] = 0x00;
 write_buffer[5] = 0xFF - (0x04 + 0x41 + 0x00);
 result3 = WriteFile(HID_Handle, write_buffer, 6, &bytes_written,0);
 result3 = ReadFile(HID_Handle, read_buffer, 6, &bytes_read, 0); // Packets received from MCU
 if(result3 ==0)
	{
	return;
	}
 if(result3 != 0)
	{
	if(read_buffer[3] == 0x55)
	{
		lblDoor -> Text = "Open";
	}

	}

MCU replies to the host (Firmware, MPLAB)

if (ReceivedDataBuffer[2] == 0x41)//Received command from Host Application to poll for switch
{         	
        if(S2==0) // If switch is pressed
         {
             ToSendDataBuffer[0]=0xAB;
             ToSendDataBuffer[1]=0x01;
             ToSendDataBuffer[2]=0x55; //Command packet to send to PC
             ToSendDataBuffer[3]=0x00;
             ToSendDataBuffer[4]=0xFF -(0x01+0x55+0x00);
         }
         else
         {
             ToSendDataBuffer[0]=0xAB;
             ToSendDataBuffer[1]=0x01;
             ToSendDataBuffer[2]=0x00; //Command packet to send to PC
             ToSendDataBuffer[3]=0x00;
             ToSendDataBuffer[4]=0xFF -(0x01+0x00+0x00);
         }
            
         if(!HIDTxHandleBusy(USBInHandle))
             USBInHandle=HIDTxPacket(CUSTOM_DEVICE_HID_EP, &ToSendDataBuffer[0],5);
}  

3rd Party Card Reader's Packet Schematic

1

Screenshots of the executable

1

2

3

4

Contributors

  • Abilash - Code and Documentation

About

Software which can read MIFARE/FeliCa cards through a card reader and execute commands to a MCU through Serial and USB communications.

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published