Skip to content

Modified config for our RP2040 debug schematic

Notifications You must be signed in to change notification settings

Penn-Electric-Racing/picoprobe

 
 

Repository files navigation

Picoprobe

Picoprobe allows a Pico / RP2040 to be used as USB -> SWD and UART bridge. This means it can be used as a debugger and serial console for another Pico.

Documentation

Picoprobe documentation can be found in the Pico Getting Started Guide. See "Appendix A: Using Picoprobe".

Hacking

For the purpose of making changes or studying of the code, you may want to compile the code yourself.

To compile this project firstly initialize and update the submodules:

 git submodule update --init

then create and switch to the build directory:

 mkdir build
 cd build

then run cmake and build the code:

 cmake ..
 make

Done! You should now have a picoprobe.uf2 that you can upload to your Pico in the normal way.

If you want to create the version that runs on the Raspberry Pi Debug Probe, then you need to invoke cmake in the sequence above with the DEBUGPROBE=ON option:

cmake -DDEBUGPROBE=ON ..

This will build with the configuration for the Debug Probe and call the output program debugprobe.uf2, as opposed to picoprobe.uf2 for the vanilla version.

Note that if you first ran through the whole sequence to compile for the Pico, then you don't need to start back at the top. You can just go back to the cmake step and start from there.

TODO

  • TinyUSB's vendor interface is FIFO-based and not packet-based. Using raw tx/rx callbacks is preferable as this stops DAP command batches from being concatenated, which confused openOCD.
  • Instead of polling, move the DAP thread to an asynchronously started/stopped one-shot operation to reduce CPU wakeups
  • AutoBaud selection, as PIO is a capable frequency counter
  • Possibly include RTT support

About

Modified config for our RP2040 debug schematic

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 91.6%
  • CMake 8.4%