Ender3 V2/S1 (DWIN/DACAI) Pro UI update

Marlin/src/MarlinCore.cpp

@@ -822,7 +822,7 @@ void idle(bool no_stepper_sleep/*=false*/) {
   TERN_(USE_BEEPER, buzzer.tick());
 
   // Handle UI input / draw events
-  TERN(HAS_DWIN_E3V2_BASIC, DWIN_Update(), ui.update());
+  TERN(DWIN_CREALITY_LCD, DWIN_Update(), ui.update());
 
   // Run i2c Position Encoders
   #if ENABLED(I2C_POSITION_ENCODERS)
@@ -1571,11 +1571,7 @@ void setup() {
   #endif
 
   #if HAS_DWIN_E3V2_BASIC
-    SETUP_LOG("E3V2 Init");
-    Encoder_Configuration();
-    HMI_Init();
-    HMI_SetLanguageCache();
-    HMI_StartFrame(true);
+    SETUP_RUN(DWIN_InitScreen());
   #endif
 
   #if HAS_SERVICE_INTERVALS && !HAS_DWIN_E3V2_BASIC

Marlin/src/feature/pause.cpp

@@ -407,6 +407,7 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
   #endif
 
   TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_open(PROMPT_INFO, F("Pause"), FPSTR(DISMISS_STR)));
+  TERN_(DWIN_LCD_PROUI, DWIN_Print_Pause());
 
   // Indicate that the printer is paused
   ++did_pause_print;
@@ -709,7 +710,7 @@ void resume_print(const_float_t slow_load_length/*=0*/, const_float_t fast_load_
 
   TERN_(HAS_FILAMENT_SENSOR, runout.reset());
 
-  TERN_(HAS_STATUS_MESSAGE, ui.reset_status());
+  TERN(DWIN_LCD_PROUI, DWIN_Print_Resume(), ui.reset_status());
   TERN_(HAS_MARLINUI_MENU, ui.return_to_status());
   TERN_(DWIN_LCD_PROUI, HMI_ReturnScreen());
 }

Marlin/src/gcode/bedlevel/mbl/G29.cpp

@@ -105,6 +105,7 @@ void GcodeSuite::G29() {
       if (!ui.wait_for_move) {
         queue.inject(parser.seen_test('N') ? F("G28" TERN(CAN_SET_LEVELING_AFTER_G28, "L0", "") "\nG29S2") : F("G29S2"));
         TERN_(EXTENSIBLE_UI, ExtUI::onMeshLevelingStart());
+        TERN_(DWIN_LCD_PROUI, DWIN_MeshLevelingStart());
         return;
       }
       state = MeshNext;
@@ -127,6 +128,7 @@ void GcodeSuite::G29() {
         // Save Z for the previous mesh position
         mbl.set_zigzag_z(mbl_probe_index - 1, current_position.z);
         TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ix, iy, current_position.z));
+        TERN_(DWIN_LCD_PROUI, DWIN_MeshUpdate(_MIN(mbl_probe_index, GRID_MAX_POINTS), int(GRID_MAX_POINTS), current_position.z));
         SET_SOFT_ENDSTOP_LOOSE(false);
       }
       // If there's another point to sample, move there with optional lift.

Marlin/src/gcode/config/M302.cpp

@@ -27,6 +27,10 @@
 #include "../gcode.h"
 #include "../../module/temperature.h"
 
+#if ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/e3v2/proui/dwin_defines.h"
+#endif
+
 /**
  * M302: Allow cold extrudes, or set the minimum extrude temperature
  *
@@ -47,6 +51,7 @@ void GcodeSuite::M302() {
   if (seen_S) {
     thermalManager.extrude_min_temp = parser.value_celsius();
     thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0);
+    TERN_(DWIN_LCD_PROUI, HMI_data.ExtMinT = thermalManager.extrude_min_temp);
   }
 
   if (parser.seen('P'))

Marlin/src/gcode/sd/M524.cpp

@@ -27,15 +27,27 @@
 #include "../gcode.h"
 #include "../../sd/cardreader.h"
 
+#if ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/e3v2/proui/dwin.h"
+#endif
+
 /**
  * M524: Abort the current SD print job (started with M24)
  */
 void GcodeSuite::M524() {
 
-  if (IS_SD_PRINTING())
-    card.abortFilePrintSoon();
-  else if (card.isMounted())
-    card.closefile();
+  #if ENABLED(DWIN_LCD_PROUI)
+
+    HMI_flag.abort_flag = true;    // The LCD will handle it
+
+  #else
+
+    if (IS_SD_PRINTING())
+      card.abortFilePrintSoon();
+    else if (card.isMounted())
+      card.closefile();
+
+  #endif
 
 }
 

Marlin/src/gcode/stats/M75-M78.cpp

@@ -39,8 +39,8 @@
 void GcodeSuite::M75() {
   startOrResumeJob();
   #if ENABLED(DWIN_LCD_PROUI)
-    DWIN_Print_Header(parser.string_arg && parser.string_arg[0] ? parser.string_arg : GET_TEXT(MSG_HOST_START_PRINT));
     DWIN_Print_Started(false);
+    if (!IS_SD_PRINTING()) DWIN_Print_Header(parser.string_arg && parser.string_arg[0] ? parser.string_arg : GET_TEXT(MSG_HOST_START_PRINT));
   #endif
 }
 
@@ -50,6 +50,7 @@ void GcodeSuite::M75() {
 void GcodeSuite::M76() {
   print_job_timer.pause();
   TERN_(HOST_PAUSE_M76, hostui.pause());
+  TERN_(DWIN_LCD_PROUI, DWIN_Print_Pause());
 }
 
 /**

Marlin/src/inc/Conditionals_LCD.h

@@ -479,6 +479,9 @@
 #if EITHER(HAS_DWIN_E3V2_BASIC, DWIN_CREALITY_LCD_JYERSUI)
   #define HAS_DWIN_E3V2 1
 #endif
+#if ENABLED(DWIN_LCD_PROUI)
+  #define DO_LIST_BIN_FILES 1
+#endif
 
 // E3V2 extras
 #if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
@@ -513,7 +516,7 @@
   #endif
 #endif
 
-#if ANY(HAS_WIRED_LCD, EXTENSIBLE_UI, DWIN_CREALITY_LCD_JYERSUI)
+#if ANY(HAS_WIRED_LCD, EXTENSIBLE_UI, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
   #define HAS_DISPLAY 1
 #endif
 

Marlin/src/lcd/e3v2/common/encoder.h

@@ -45,12 +45,32 @@ typedef enum {
   ENCODER_DIFF_ENTER = 3   // click
 } EncoderState;
 
+#define ENCODER_WAIT_MS 20
+
 // Encoder initialization
 void Encoder_Configuration();
 
 // Analyze encoder value and return state
 EncoderState Encoder_ReceiveAnalyze();
 
+inline EncoderState get_encoder_state() {
+  static millis_t Encoder_ms = 0;
+  const millis_t ms = millis();
+  if (PENDING(ms, Encoder_ms)) return ENCODER_DIFF_NO;
+  const EncoderState state = Encoder_ReceiveAnalyze();
+  if (state != ENCODER_DIFF_NO) Encoder_ms = ms + ENCODER_WAIT_MS;
+  return state;
+}
+
+template<typename T>
+inline bool Apply_Encoder(const EncoderState &encoder_diffState, T &valref) {
+  if (encoder_diffState == ENCODER_DIFF_CW)
+    valref += EncoderRate.encoderMoveValue;
+  else if (encoder_diffState == ENCODER_DIFF_CCW)
+    valref -= EncoderRate.encoderMoveValue;
+  return encoder_diffState == ENCODER_DIFF_ENTER;
+}
+
 /*********************** Encoder LED ***********************/
 
 #if PIN_EXISTS(LCD_LED)

Marlin/src/lcd/e3v2/creality/dwin.cpp

@@ -471,15 +471,6 @@ void Draw_Back_First(const bool is_sel=true) {
   if (is_sel) Draw_Menu_Cursor(0);
 }
 
-template <typename T>
-inline bool Apply_Encoder(const EncoderState &encoder_diffState, T &valref) {
-  if (encoder_diffState == ENCODER_DIFF_CW)
-    valref += EncoderRate.encoderMoveValue;
-  else if (encoder_diffState == ENCODER_DIFF_CCW)
-    valref -= EncoderRate.encoderMoveValue;
-  return encoder_diffState == ENCODER_DIFF_ENTER;
-}
-
 //
 // Draw Menus
 //
@@ -1296,15 +1287,6 @@ void Goto_MainMenu() {
   TERN(HAS_ONESTEP_LEVELING, ICON_Leveling, ICON_StartInfo)();
 }
 
-inline EncoderState get_encoder_state() {
-  static millis_t Encoder_ms = 0;
-  const millis_t ms = millis();
-  if (PENDING(ms, Encoder_ms)) return ENCODER_DIFF_NO;
-  const EncoderState state = Encoder_ReceiveAnalyze();
-  if (state != ENCODER_DIFF_NO) Encoder_ms = ms + ENCODER_WAIT_MS;
-  return state;
-}
-
 void HMI_Plan_Move(const feedRate_t fr_mm_s) {
   if (!planner.is_full()) {
     planner.synchronize();
@@ -4086,6 +4068,13 @@ void HMI_Init() {
   HMI_SetLanguage();
 }
 
+void DWIN_InitScreen() {
+  Encoder_Configuration();
+  HMI_Init();
+  HMI_SetLanguageCache();
+  HMI_StartFrame(true);
+}
+
 void DWIN_Update() {
   EachMomentUpdate();   // Status update
   HMI_SDCardUpdate();   // SD card update

Marlin/src/lcd/e3v2/creality/dwin.h

@@ -236,6 +236,7 @@ void HMI_MaxJerk();         // Maximum jerk speed submenu
 void HMI_Step();            // Transmission ratio
 
 void HMI_Init();
+void DWIN_InitScreen();
 void DWIN_Update();
 void EachMomentUpdate();
 void DWIN_HandleScreen();