godfrey4home

GodFrey4Home will help you to manage hardware devices for a HomeKit client ( Iphone,Ipad) , based on a GO stack software.

GodFrey4Home is provide under MIT License.

GodFrey4Home is currently a set of independent programm.

homekit-tasmota-switch.go

• src/homekit-tasmota-switch.go

  control and expose 6 devices , these devices use a Tasmota firmware ( https://tasmota.github.io/docs/ ) was installed with tuya-convert ( https://github.com/ct-Open-Source/tuya-convert )

  • 2 Gosund WP212 ( https://amzn.to/2P5Pecb ) the template for Tasmota is https://blakadder.github.io/templates/gosund_WP212.html
  • 4 Gosund WP5 ( https://amzn.to/359w8Yy ) the template for Tasmota is https://blakadder.github.io/templates/gosund_WP5.html

power-switch-cgi

• src/power-switch-cgi.go

This program expose a http/cgi interface to drive a X220 relay board => http://gce-electronics.com/en/-usb/359-controller-usb-2-relay-board-x220-.html This relay board :

• drive 2 relay : 230 Vac / 5A or 125Vac / 10A
• power must be supply by USB connection

Linux kernel must have these modules loaded

• usbserial
• ftdi_sio

Can be modify , to drive a http://gce-electronics.com/en/-usb/23-usb-relay-controller-x440.html

homekit-power-switch

• src/homekit-power-switch.go

A homekit bridge , that will access a relay board expose by power-switch-cgi

This bridge use the package github.com/brutella/hc , for providing the HomeKit interface.

to compile

for your local architecture

cd src
go build -ldflags "-s -w" -v power-switch-cgi.go

for a different architecture

For example , you want deploy the binary on a raspberry PI or or some openwrt router .

for a raspberry PI

env GOOS=linux GOARCH=arm GOARM=5 go build   -ldflags "-s -w" -v homekit-power-switch.go

for a cubietruck see debian on cubie truck (https://www.armbian.com/cubietruck/)

env GOOS=linux GOARCH=arm GOARM=7 go build   -ldflags "-s -w" -v homekit-power-switch.go