Skip to content

DreamLab/IFCBondCollector

Repository files navigation

IFCBondCollector

image0

About

Monitoring for bonding network interfaces based on diamond collector and llpd.

How to build/install

Simply install package via pip:

pip install diamond-ifcbondcollector

# or
# python setup.py install

or with deb

make deb
dpkg -i ./bin/diamond-ifcbondcollector_2.0.0_amd64.deb

Requirements

Collector requires following packages to be installed:

  • Python2 (>=2.7)
  • diamond
  • lldpd

Example configuration

Base

Default configuration

enabled = True
ifc_name = "bond0"

Extended

Extended configuration with rules collector will check if the designated network interfaces are connected to the correct network device (interface names must be the same as those available from lldpctl).

In this example we check if eth0 is connected to switch with name test_name_switch1, and eth1 to test_name_switch2. Below configuration matches switch by chassis_name - a field fromm llpdctl output, you can specify to test against different field eg. chassis_mac, port_descr etc.

enabled = True
ifc_name = "bond0"

eth0_on_sw1 = eth0, chassis_name, test_name_switch1
eth1_on_sw2 = eth1, chassis_name, test_name_switch2

rules = eth0_on_sw1, eth1_on_sw2

License

Apache License 2.0