git clone https://github.com/DrA1ex/co2-temp-monitor.git
cd ./co2-temp-monitor
npm install
You should provide a streaming file with sensor data according to the Data Format.
To provide data use ESP32 project along with receiver
script.
# To verify request, use any string, same for sender and receiver
API_KEY=<VERIFICATION KEY>
OUT_FILE=<FILE TO WRITE>
# Configure port
API_PORT=8080
# You may want to increase default keep-alive timeout to reduce sending latency
API_KEEP_ALIVE_TIMEOUT=60000
# Optionally for SSL
SSL_KEY=<PATH TO SSL KEY PEM>
SSL_CERT=<PATH TO SSL CERT PEM>
# Run receiver server
node ./src/receiver.js
Receiver starts http(s) server with POST /sensor
method.
You should also provide your own log rotation or use the built-in script.
# Example of using a cron task:
chmod +x ./log_rotate.sh
crontab -l | { cat; echo "0 0 * * * export BASEDIR=/path/to/data; $PWD/log_rotate.sh"; } | crontab -
You can use the Serial Port Receiver to collect the data. The receiver will monitor the port and write all data to a file, which can be read by the chart server and a Telegram bot.
SERIAL=/dev/<DEVICE_ID> node ./src/serial.js
Please replace <DEVICE_ID>
with the appropriate identifier for your device.
Alternative, if your monitor supports the HID interface, you can use co2mon to populate data:
# Build and install co2mon according to the instructions on its GitHub page.
# Then run co2mon and write the stream to a file.
# Also, you must provide timestamp (ISO) in the stream file, as co2mon doesn't provide them.
# I use `ts` and `tee` tools.
# For MacOS, you should install the tools first:
# brew install moreutils
./build/co2mond/co2mond | ts "%Y-%m-%dT%H:%M:%S%z" | tee -a ~/temp.log
# Create a symbolic link to your sensor stream file
ln -s /path/to/sensor/data_stream.log ./temp.log
# Prepare the bundle
npm run bundle
# Configure port
API_PORT=8080
# Option A: Run an HTTP server
node ./src/chart.js
# Option B: Run an HTTPS server
# Generate a self-signed SSL certificate if you don't have one
mkdir certs
openssl genrsa -out certs/key.pem
openssl req -new -key certs/key.pem -out certs/csr.pem
openssl x509 -req -days 9999 -in certs/csr.pem -signkey certs/key.pem -out certs/cert.pem
SSL_KEY=./certs/key.pem
SSL_CERT=./certs/cert.pem
# Run the web server with SSL
node ./src/chart.js
To customize chart, you can use the following hash parameters:
Key | Type | Description |
---|---|---|
ratio | float | 0 for linear scale, 1 for logarithmic scale. You can set values in between. |
length | int | Number of sensor data samples to retrieve. |
key | string[] (comma separated) | Filter for sensor keys. |
Example: /#key=co2,fan&ratio=0&length=1000
# Create a link to your sensor stream file
ln -s /path/to/sensor/data_stream.log ./temp.log
# For /graph command you should install prerequrenments:
# See for details: https://www.npmjs.com/package/canvas
# For MacOS:
# brew install pkg-config cairo pango libpng jpeg giflib librsvg pixman
# For Ubuntu:
# sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev
# Option 1: Run with auto-restarting when the app crashes
chmod +x ./monitor.sh
BOT_TOKEN=<YOUR_TOKEN_HERE> ./monitor.sh
# Option 2: Simple run
BOT_TOKEN=<YOUR_TOKEN_HERE> node ./src/server.js
/current - Get current sensor data
/graph - Get last sensor data history graph
/summary - Get summary of sensor data for last 24 hour
/subscribe - Subscribe to notifications
/unsubscribe - Unsubscribe from notifications
/limits - List of current sensor data limits
/limit - Set sensor data limit
/help - Print help
After the first start, the server is going to create a db.json
file. You can modify the file directly to adjust some parameters.
{
Settings: {
// Custom parameters. You can add new or delete parameters you don't need
sensorParameters: [
{key: "temperature", name: "Temperature", unit: "Cº", fraction: 2, dataKey: "Tamb"},
{key: "co2", name: "CO2", unit: "ppm", fraction: 0, dataKey: "CntR"},
{key: "humidity", name: "Humidity", unit: "%", fraction: 1, dataKey: "Hum"},
{key: "freshness", name: "Freshness", unit: "sec", fraction: 0},
],
minRefreshInterval: 1, // Minimum refresh time interval
historyLength: 1000, // History samples to store (used in chart generation)
alertCooldown: 1.5 * 60, // Cooldown for alert status change in seconds
alertForcingInterval: 10 * 60, // Force resend alert interval in seconds
fileName: "./temp.log", // Name of the sensor data file
alertOkPrefix: "🌿", // Prefix for OK alert
alertFailedPrefix: "😱😱😱", // Prefix for failing alert
notifyLimitsChanged: true, // Notfiy subscribers when limits changed
summaryEnabled: true, // Send every day sensor data summary
summaryTime: 9, // Summary send hour
summaryPeriod: [23, 9], // Summary period, hours (range: [from, to))
graphSize: [80, 30], // Size of the graph (columns x lines)
}
}
Also, you can use the telegram bot to modify the alert range using the command: /limit <key> <from> <to>
Each line should adhere to the following format:
<ISO-8601-DATETIME> <DATA-KEY> <VALUE>\n
Where:
- ISO-8601-DATETIME: Represents the timestamp in the ISO 8601 format, for example,
2023-12-06T22:43:40Z
. - DATA-KEY: Corresponds to the specific type of data being recorded.
- VALUE: Denotes the recorded floating-point value.
- \n: Denotes the line ending (EOL, new line).
To parse the data line, the following regular expression is used:
^(.*)\s+$KEY.+?(\d+\.?\d*)$
2023-12-06T22:43:40Z Tamb 28.6000
2023-12-06T22:43:41Z CntR 2340
2023-12-06T22:43:41Z Hum 48
This guide allows you to configure deployment via PM2 to make it easier. Follow these steps to configure deployment.
Create a file named ecosystem.json
in the root directory of your project. Replace the placeholders with your actual values. This file will define your application configurations.
{
"apps": [
{
"name": "bot",
"script": "./src/server.js",
"env": {
"BOT_TOKEN": "<BOT-TOKEN>"
}
},
{
"name": "receiver",
"script": "./src/receiver.js",
"env": {
"API_KEY": "<API-KEY>",
"API_PORT": "8080",
"SSL_CERT": "./certs/cert.pem",
"SSL_KEY": "./certs/key.pem"
}
},
{
"name": "chart",
"script": "./src/chart.js",
"env": {
"API_PORT": "8081",
"SSL_CERT": "./certs/cert.pem",
"SSL_KEY": "./certs/key.pem"
}
}
],
"deploy": {
"production": {
"user": "<SSH-USERNAME>",
"host": "<REMOTE-HOST>",
"ref": "origin/main",
"repo": "https://github.com/DrA1ex/co2-temp-monitor.git",
"path": "/opt/co2-temp-monitor",
"post-deploy": "npm install && npm run bundle && pm2 startOrRestart ecosystem.json --env production"
}
}
}
Place SSL certificates on the remote server, or generate self-signed cerrtificate using the following commands:
mkdir certs
openssl genrsa -out certs/key.pem
openssl req -new -key certs/key.pem -out certs/csr.pem
openssl x509 -req -days 9999 -in certs/csr.pem -signkey certs/key.pem -out certs/cert.pem
Install PM2 globally and set up the environment (if not done before). Then deploy and start the servers using PM2 deploy.
# Install PM2 globally
sudo npm install -g pm2
# Setup environment (once or when ecosystem.json changed)
pm2 deploy production setup
# Deploy and start servers
pm2 deploy production