Skip to content

A Pointcloud streaming (Flask) app and web browser visualiser (Three.js)

License

Notifications You must be signed in to change notification settings

DavidTorresOcana/pointcloud_streamer

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

7 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Flask pointcloud streamer

This is demo of pointcloud streaming from a Flask based back-end to Three.js running front-end using websockets for low latency.

For demo purposes the open source KITTI raw data is used, but this framework can be adapted to any other pointcloud type of data.

For the back-end, Flask is used in conjunction with Flask-socketio to enable connectivity with Socket.io client. On the front-end, Three.js is used as rendering engine.

Stream pointclouds from anywhere!

Example demo

Get started:

The main files are:

  • app.py: back-end Flask application
  • static/js/three_app.js: front-end Three.js based application
  • templates/points.html: page html

If you are looking for developing/adapting your application, those are the main files to look at. Comments should guide you through the code. E.g. you can choose the streaming mode by un/commenting templates/points.html lines 20/21.

Dependencies and installation:

  • python 3.6+
    • gevent
    • gevent-websocket
    • flask-socketio>=5.1.1
    • Flask
    • numpy
    • uwsgi
    • pykitti

To get started, install all requirements with pip3 install -r requirements.txt

Make sure eventlet library is not installed in your system by pip3 uninstall eventlet

This application was tested on Ubuntu 18, but it should not be complicated to make it run in other OS.

Get sample data:

Download any KITTI raw sequence's (synced+rectified) data and calibrations from here and uncompress into data/

To configure your KITTI sequence, read pykitti docs and modify app.py to run your specific sequence. By default 2011_09_26 sequence 0001 is used.

Run application:

To execute the back-end execute: uwsgi --http :9002 --gevent 5 --http-websockets --master --wsgi-file app.py --callable app

You can then open the front-end in your web-browser localhost:9002 to visualize the streaming.

LICENSE:

MIT License

Copyright (c) 2020 David Torres Ocana

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

About

A Pointcloud streaming (Flask) app and web browser visualiser (Three.js)

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published