Advanced-Encryption-Standard

Overview

A full hardware implementation of the Advanced Encryption Standard (AES) using Verilog, supporting SPI communication between all modules.

AES Modules

The two central modules in this project are Cipher and Decipher, which are responsible for the encryption and decryption processes following the AES, respectively. Both of these modules use the output of the KeyExpansion module to execute their computation. Encryption, decryption, and key expansion are all implemented in a sequential manner, balancing the tradeoff between speed and hardware usage. Furthermore, the modules support AES-128, AES-192, and AES-256.

SPI Modules

The SPImaster module stores the key and the data to be encrypted/decrypted, and SPIslave modules communicate directly with the Cipher/Decipher/KeyExpansion modules. The encryption process is as follows:

1. The SPImaster sends the key to the keyExpansion module, which generates the key schedule (to be used in encryption/decryption).
2. After the keyExpansion module finishes its task, the SPImaster sends the 128-bits block of data to the Cipher module over 128 clock cycles.
3. Once the encryption process is over, the SPImaster receives the 128-bits long ciphertext over multiple clock cycles, and stores this result.
4. Steps 2 & 3 are then continuously repeated until the input data is completely encrypted, in blocks of 128-bits. The Decryption process is identical.

Notes

• The SelfCheckingTB module is the final wrapper that is ready to be directly uploaded to the FPGA board (5CSEMA5F31C6N). If all operations are successful, LEDS 0-7 will all light up.
• For every module, there is a corresponding testbench. Simulating those tesbenches requires ModelSim-Altera.