tests.yml

###
# Initially copied from
# https://github.com/actions/starter-workflows/blob/main/ci/python-package.yml
# And later based on the version I (jamadden) updated at gevent/gevent
#
# Original comment follows.
###
###
# This workflow will install Python dependencies, run tests and lint with a variety of Python versions
# For more information see: https://help.github.com/actions/language-and-framework-guides/using-python-with-github-actions
###

###
# Important notes on GitHub actions:
#
# - We only get 2,000 free minutes a month (private repos)
# - We only get 500MB of artifact storage
# - Cache storage is limited to 7 days and 5GB.
# - macOS minutes are 10x as expensive as Linux minutes
# - windows minutes are twice as expensive.
#
# So keep those workflows light.
#
# In December 2020, github only supports x86/64. If we wanted to test
# on other architectures, we can use docker emulation, but there's no
# native support.
#
# Another major downside: You can't just re-run the job for one part
# of the matrix. So if there's a transient test failure that hit, say, 3.8,
# to get a clean run every version of Python runs again. That's bad.
# https://github.community/t/ability-to-rerun-just-a-single-job-in-a-workflow/17234/65

name: tests


# Triggers the workflow on push or pull request events
on: [push, pull_request]
# Limiting to particular branches might be helpful to conserve minutes.
#on:
  # push:
  #   branches: [ $default-branch ]
  # pull_request:
  #   branches: [ $default-branch ]

env:
  # Weirdly, this has to be a top-level key, not ``defaults.env``
  PYTHONHASHSEED: 8675309
  PYTHONUNBUFFERED: 1
  PYTHONDONTWRITEBYTECODE: 1
  # PYTHONDEVMODE leads to crashes in pylibmc.
  # See https://github.com/lericson/pylibmc/issues/254
  # - PYTHONDEVMODE=1
  PYTHONFAULTHANDLER: 1

  PIP_UPGRADE_STRATEGY: eager
  # Don't get warnings about Python 2 support being deprecated. We
  # know. The env var works for pip 20.
  PIP_NO_PYTHON_VERSION_WARNING: 1
  PIP_NO_WARN_SCRIPT_LOCATION: 1

  # Disable some warnings produced by libev especially and also some Cython generated code.
  # These are shared between GCC and clang so it must be a minimal set.
  # TODO: Figure out how to set env vars per platform without resorting to inline scripting.
  CFLAGS: -Ofast -pipe
  CXXFLAGS: -Ofast -pipe
  # Uploading built wheels for releases.
  # TWINE_PASSWORD is encrypted and stored directly in the
  # travis repo settings.
  TWINE_USERNAME: __token__

  ###
  # caching
  ###
  CCACHE_DIR: ~/.ccache
  CC: "ccache gcc"
  CCACHE_NOCPP2: true
  CCACHE_SLOPPINESS: file_macro,time_macros,include_file_ctime,include_file_mtime
  CCACHE_NOHASHDIR: true

  #


jobs:
  test:
    runs-on: ${{ matrix.os }}
    strategy:
      matrix:
        python-version: ['pypy-3.10', '3.12-dev', 3.8, 3.9, '3.10', '3.11']
        os: [ubuntu-latest, macos-latest]
        exclude:
          - os: macos-latest
            python-version: pypy-3.10
          # Can't build persistent on 3.12 with -UNDEBUG because it
          # accesses fields of objects that aren't there in assert statements;
          # we build linux with assertions enabled, and there is no 3.12
          # persistent wheel yet, so we have to exclude that one.
          - os: ubuntu-latest
            python-version: "3.12-dev"

    steps:
      - name: checkout
        uses: actions/checkout@v3

      - name: Set up Python ${{ matrix.python-version }}
        uses: actions/setup-python@v4
        with:
          python-version: ${{ matrix.python-version }}
          cache: 'pip'
          cache-dependency-path: setup.py

      - name: Install ccache, configure CFLAGS (ubuntu)
        uses: ./.github/actions/config-cc

      - name: Install native libs
        uses: ./.github/actions/install-native-libs


      - name: Install Build Dependencies
        run: |
          pip install -U pip
          pip install -U -q setuptools wheel twine
          pip install -q -U 'cython>=3.0rc2'
          pip install -U coverage
          pip install -U cffi
      - name: Build mysqlclient
        # Ubuntu 20 doesn't have libmysqlclient.20, but mysqlclient
        # client binaries on PyPI are linked against that. We can install that,
        # but then SSL breaks for an unknown reason, and we can't disable SSL
        # because authentication requires it (maybe we could change the authentiaction plugin?)
        # So instead we install the development sources and compile mysqlclient locally.
        # The relevant package, libmysqlclient-dev, is already installed.
        if: startsWith( matrix.os, 'ubuntu-20')
        run: |
          pip install --no-binary :all: mysqlclient

      - name: Install RelStorage (non-Mac)
        if: ${{ ! startsWith(runner.os, 'Mac') }}
        run: |
          python setup.py bdist_wheel
          WHL=$(ls dist/*whl)
          python -m pip install -U  "$WHL[test,docs,all_tested_drivers]"
        env:
          # Ensure we test with assertions enabled.
          # As opposed to the manylinux builds, which we distribute and
          # thus only use O3 (because Ofast enables fast-math, which has
          # process-wide effects), we test with Ofast here, because we
          # expect that some people will compile it themselves with that setting.
          CPPFLAGS: "-Ofast -UNDEBUG"

      - name: Install RelStorage (Mac)
        if: startsWith(runner.os, 'Mac')
        run: |
          python setup.py bdist_wheel
          WHL=$(ls dist/*whl)
          python -m pip install -U "$WHL[test,docs,all_tested_drivers]"
        env:
          # Unlike the above, we are actually distributing these
          # wheels, so they need to be built for production use.
          CPPFLAGS: "-O3"
          # Build for both architectures
          ARCHFLAGS: "-arch x86_64 -arch arm64"

      - name: Check RelStorage build
        run: |
          ls -l dist
          twine check dist/*
      - name: Upload RelStorage wheel
        uses: actions/upload-artifact@v2
        with:
          name: RelStorage-${{ runner.os }}-${{ matrix.python-version }}.whl
          path: dist/*whl
      - name: lint
        if: matrix.python-version == '3.11' && startsWith(runner.os, 'Linux')
        # At this writing, PyLint 2.17/astroid 2.15 won't work on 3.12
        run: |
          pip install -U pylint
          python -m pylint --limit-inference-results=1 --rcfile=.pylintrc relstorage -f parseable -r n
      - name: Initialize Test Databases
        if: startsWith(runner.os, 'macOS')
        run: |
          brew services start mysql
          brew services start postgresql
          # Make sure postgresql is accepting connections.
          # TODO: Use pg_isready in a loop?
          sleep 5
          # XXX: mysql isn't currently starting. Why? So
          # skip initializing it.
          #
          # brew postgres uses the current username, apparently, instead of
          # the standard "postgres" user as the root. It still uses 'postgres'
          # as the default database, though.
          brew services list
          RELSTORAGETEST_PG_UNAME=$USER RELSTORAGETEST_PG_DBNAME=postgres .travis/postgres.sh
      - name: Initialize Test Databases
        if: startsWith(runner.os, 'Linux')
        run: |
          sudo systemctl start mysql.service
          echo Configuring MySQL
          RELSTORAGETEST_MY_PW="--password=root" .travis/mysql.sh
          # XXX: Disabled: The software is installed, but isn't running by default,
          # apparently. They *really* want you to use a docker service.
          # echo Configuring PostgreSQL
          # .travis/postgres.sh
      - name: Run tests and report coverage
        uses: ./.github/actions/run-tests
        with:
          useCoverage: ${{ !startsWith(matrix.python-version, 'pypy')  }}
      - name: Coveralls Parallel
        uses: coverallsapp/github-action@v2
        with:
          flag-name: run-${{ join(matrix.*, '-') }}
          parallel: true
      - name: Publish package to PyPI (mac)
        # We cannot 'uses: pypa/gh-action-pypi-publish@v1.4.1' because
        # that's apparently a container action, and those don't run on
        # the Mac.
        if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags') && startsWith(runner.os, 'Mac')
        env:
          TWINE_PASSWORD: ${{ secrets.TWINE_PASSWORD }}
        run: |
          twine upload --skip-existing dist/*

  coveralls-finish:
    needs: test
    if: ${{ always() }}
    runs-on: ubuntu-latest
    steps:
      - name: Coveralls Finished
        uses: coverallsapp/github-action@v2
        with:
          parallel-finished: true

  manylinux:
    needs: test
    runs-on: ubuntu-latest
    # We use a regular Python matrix entry to share as much code as possible.
    strategy:
      matrix:
        python-version: [3.9]
        image:
          - manylinux2010_x86_64
          - manylinux2014_aarch64
          - manylinux2014_ppc64le
          - manylinux2014_s390x
          - manylinux2014_x86_64
          - musllinux_1_1_x86_64
          - musllinux_1_1_aarch64
    name: ${{ matrix.image }}
    steps:
      - name: checkout
        uses: actions/checkout@v3
      - name: Set up Python ${{ matrix.python-version }}
        uses: actions/setup-python@v4
        with:
          python-version: ${{ matrix.python-version }}
      - name: Set up QEMU
        uses: docker/setup-qemu-action@v2
        with:
          platforms: all
      - name: Build RelStorage
        env:
          DOCKER_IMAGE: quay.io/pypa/${{ matrix.image }}
        run: bash ./scripts/releases/make-manylinux
      - name: Store RelStorage wheels
        uses: actions/upload-artifact@v3
        with:
          path: wheelhouse/*whl
          name: ${{ matrix.image }}_wheels.zip
      - name: Publish package to PyPI
        uses: pypa/gh-action-pypi-publish@v1.4.1
        if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags')
        with:
          user: __token__
          password: ${{ secrets.TWINE_PASSWORD }}
          skip_existing: true
          packages_dir: wheelhouse/


# TODO:
# * Use YAML syntax to share snippets, like the old .travis.yml did
# Sadly, as of 2021-02-01, Github Actions does not support anchors at
# all. Just having an anchor results in an error:
#
#   The workflow is not valid. .github/workflows/tests.yml: Anchors
#   are not currently supported. Remove the anchor 'an-strategy'
#
# The alternative of using composite actions doesn't work either,
# because composite actions are limited to running shell scripts.
# Steps in them can't call other actions with `uses:`, and nor can
# they be conditional with `if:`.