A Axis Jog Stepsize Erratic

[Mooselake]

Version

2.0.12

Hardware / Firmware

FluidNC

What happened

In the jog panel, when using the larger/smaller stepsize buttons work as expected with XY and Z, but A is erratic. For example, the A stepsize may go from 100 to 0.1, 10000 to 10, or other values. I'm unable to determine a consistent pattern, and multiply by 10 or divide by 10 don't work right when assigning them to jog controller buttons.

How to reproduce

Configure a machine with X, Z, and A axes enabled. Open the jog controller window, and click on the larger and smaller buttons

Operating System

Tried on both Windows 11 and Windows 10 on different computers, same result

Anything else

Occurs almost every time. Occasionally it will change by a factor of 10, but more often it will change by other (power of 10) factors. This is with a Bobscnc Revolution, and FluidNC multiple versions. Tried on both an i5-5200u Lenovo G50-80 with W10, and a Beelink U59 Pro with W11, same results