Zigbee2MQTT Start at Boot

[xtremeideaz]

Hello,

Thank you for this wonderful lxc script.
How do i get the Zigbee2MQTT to start up automatically without having to insert the CD start command every time there's a system reboot?

Please help.

[tteck]

If you installed between 2/23/2022 and 3/19/2022 run systemctl enable zigbee2mqtt.service in the LXC console. I forgot to enable the service when I wrote the V2 script
Before 2/23/2022 and after 3/19/2022 it should start at boot

[tteck]

there'a also a z2m-copy-data.sh script to copy your data to a new LXC
Just don't run both at the same time

[tteck]

Usually when I see Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' Z2M is already running

[tteck]

always try loading the frontend

[xtremeideaz]

try systemctl stop zigbee2mqtt then systemctl enable zigbee2mqtt.service and last systemctl start zigbee2mqtt before reinstalling

This did the trick. Thanks. It's working now.

[xtremeideaz]

there'a also a z2m-copy-data.sh script to copy your data to a new LXC Just don't run both at the same time

Thanks. i'll write this down for future use. Thanks a lot.